Expansion cards and OCP mezzanine cards
Preliminary steps
▶ Locate the desired server node with the ID button.
▶
"Shutting down the server node" on page
▶ Remove all external cables from the server node.
▶
"Removing server nodes from the server enclosure" on page
▶
"Removing a riser module" on page
▶ If applicable, remove the SFP+ transceiver modules from the expansion
card, see
"Shutting down the server node" on page
Removing the TFM
▶ Remove the expansion card with the TFM installed, see
expansion cards " on page
Figure 84: Disconnecting the FBU cable from the TFM
▶ Disconnect the FBU cable from the TFM.
146
49.
118.
Upgrade and Maintenance Manual
45.
45.
"Removing
45.