Fujitsu PRIMERGY CX2550 M6 Upgrade And Maintenance Manual page 226

System board and components
Figure 157: Installing the TPM
▶ Connect the TPM to the system board (1).
▶ Fasten the TPM with the special screw for the TPM using the TPM bit insert
or TPM module fixing tool (Japan) (2).
CAUTION
▶
Do not fasten the screw too firmly.
▶
Stop it by extent where the head of the screw lightly touches the
TPM. Torque: 0.6 Nm (not used in Japan).
Concluding steps
▶ Install the riser modules, see
▶ Reconnect all cables to the system board. For a complete cabling overview,
see "Cabling" on page
▶
"Resuming BitLocker functionality" on page
▶ Enable the TPM in the system board BIOS, see
system board BIOS".
Enabling the TPM in the system board BIOS
▶ Switch on or restart your server.
▶ As soon as the startup screen appears, press the [F2] function key to enter
the BIOS setup menu.
▶ Select the Configuration menu.
▶ Select the Security Configuration submenu.
226
"Installing a riser module" on page
265.
Upgrade and Maintenance Manual
81.
"Enabling the TPM in the
51.