Table of Contents
Advertisement
6.7
Replacing a dedicated internal RAID
module
Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶ Locate the desired server node with the ID button.
▶
"Shutting down the server node" on page
▶ Remove all external cables from the server node.
▶
"Removing server nodes from the server enclosure" on page
Removing a dedicated internal RAID module
▶ Disconnect internal cables to the expansion card.
Figure 53: Removing the node link bar
▶ Remove two screws from the node link bar (see circles).
Screw type: #6-32
Tools: Phillips PH2 / (+) No.2
Expansion cards and OCP mezzanine cards
Upgrade and Maintenance Manual
Hardware: 10 minutes
45.
45.
123
Advertisement
Table of Contents
