LTF Time Of Flight Laser Distance Sensor With IO-Link Instruction Manual
Chapter Contents
Models ............................................................................................................................................................................................................... 5
Overview ............................................................................................................................................................................................................. 5
Laser Description and Safety Information ........................................................................................................................................................... 7
Chapter 1
Laser distance sensor with dual discrete (switched) outputs and IO-Link.
WARNING:
Models
Family
Overview
The LTF Time of Flight Laser Distance Sensor with IO-Link is designed for precise, long-distance measurements. A 2-line
LCD shows the real-time distance measurement, in either millimeters or inches, when the sensor is in Run mode.
See Factory Defaults for a list of sensor default settings.
Models with current or voltage analog outputs are available.
June 22, 2023
Quick Start Guide Product Description
•
Do not use this device for personnel protection
•
Using this device for personnel protection could result in serious injury or death.
•
This device does not include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A device failure or malfunction can cause either an energized (on)
or de-energized (off) output condition.
Range (m)
Output
12
K
12
K
= 12 m
= (2) NPN/PNP discrete
24
= 24 m
with I/O Link
•
High performance time of flight measurement
•
Up to 24 m range
•
Reliably detects challenging targets
•
Fast set up with intuitive interface
Laser
Sensing
Class
Mode
C2
LD
C2
LD
= Class 2
= Laser diffuse
© Banner Engineering Corp.
Connector
Q
Q
= Rotatable M12/Euro QD
QP
= PVC M12/Euro Pigtail QD
QD models require mating cordset
5