Table of Contents
Advertisement
Q90R R-GAGE® Radar Sensor Instruction Manual
Chapter Contents
1.1 Models............................................................................................................................................................................................................ 3
1.2 Overview ........................................................................................................................................................................................................ 3
1.3 Features and Indicators.................................................................................................................................................................................. 4
1.4 Radar Configuration Software ........................................................................................................................................................................ 4
Chapter 1
Radar-Based Sensors for Detection and Measurement of Moving and Stationary Targets. Patent pending.
WARNING:
•
Do not use this device for personnel protection
•
Using this device for personnel protection could result in serious injury or death.
•
This device does not include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A device failure or malfunction can cause either an energized (on)
or de-energized (off) output condition.
IMPORTANT: To satisfy RF exposure requirements, this device and its antenna must operate with a
separation distance of at least 20 cm from all persons.
1.1
Models
Table 1.
Q90R-4040 Models
Models
Detection Range
Q90R-4040-6KIQ
0.15 m to 20 m
Q90R-4040-6KUQ
(0.5 ft to 65.6 ft)
Q90R-4040-6KDQ
1.2
Overview
The Q90R is an industrial radar sensor that uses high-frequency radio waves from its internal antenna to detect and measure
distance to objects in its field of view.
The Q90R detects a wide variety of materials including metal, liquids, or organic materials. Use the supplied software,IO-
Link, or a remote input wire to configure the sensor to sense objects within a specified distance while ignoring objects beyond
this distance (background suppression). Or configure the sensor to indicate the presence or absence of objects at a specific
(or "taught") distance or range of distances (retroreflective).
February 12, 2024
Product Description
•
FMCW radar detects moving and stationary objects
•
Adjustable sensing field—ignores objects beyond setpoint
•
Easy setup and configuration of range, sensitivity, and output using the Banner
Radar Configuration Software
•
Sensing functions are immune to wind, fog, steam, and temperature changes and
resistant to rain and snow
•
Compact, rugged IP69K housing withstands harsh environments
Supply Voltage
10 V DC to 30 V DC
12 V DC to 30 V DC
10 V DC to 30 V DC
© Banner Engineering Corp. All rights reserved.
Telecom Approved
Analog current
(4 mA to 20 mA, 1 NPN/PNP discrete,
and IO-Link)
US, Canada, Europe, Australia,
Analog voltage
New Zealand
(0 V to 10 V or 0.5 V to 4.5 V, 1 NPN/
PNP discrete, and IO-Link)
Dual discrete
(NPN/PNP, PFM, and IO-Link)
Output
3
Advertisement
Table of Contents
