Adjust Switch Point - Banner LTF12 Instruction Manual

LTF Time Of Flight Laser Distance Sensor With IO-Link Instruction Manual
Present the target. The target must be within the sensor's range.
Access the switch point TEACH mode and TEACH the sensor.
2.
Navigate: MENU › Dx_OUT › TchSPt
Remote Input Instructions
Verify the sensor is in Switch mode.
1.
Access the TEACH mode.
2.
Single-pulse the remote input.
Present the target.
3.
Present the target.
TEACH the sensor.
4.
Five-pulse the remote input.
Adjust Switch Point
The AdjSPt option manually adjusts the value of the switch point threshold for the discrete output when the sensor is in
Switch mode. The value is adjustable within the sensor's range. This menu is not available when the sensor is in Window,
Alarm, or Health mode.
22
Action
Action
Action
T
Action
Action
T T T
T T T
© Banner Engineering Corp.
Result
The target's distance measurement value
displays.
Result
"TchSPt Teaching" displays while the sensor
is being taught.
TEACH Accepted
The new value is shown on the second line
of the display and flashes before it is saved
and the sensor returns to "Dx_OUT Tch-
SPt".
TEACH Not Accepted
"FAIL" and a warning message display, and
the sensor returns to "Dx_OUT TchSPt".
Result
"RMT TCH" and the current measurement
value display.
Result
"RMT TCH" and the target's measurement
value display.
Result
"TchSPt Teaching" displays while the sensor
is being taught.
TEACH Accepted
The new value displays on the second line
T
T
of the display, flashes, and the sensor re-
turns to Run mode.
T
TEACH Not Accepted
"FAIL" flashes, the sensor returns to step 3,
and "RMT TCH" displays.
June 22, 2023