Renesas E1 User Manual page 35

E1/E20 Emulator
If you click on the [Cancel] button, "FAIL" is displayed on the screen (see figure below). Correctly connect the
cable to the self-checking connector and click on the [START] button again to start the self-checking program.
Figure A.9 [FAIL] Display that Appears When [Cancel] is Clicked on
(5) As soon as the self-checking program is started.
"TEST3 is running." appears on the screen and self-checking continues.
"PASS" or "FAIL" appears after TEST3 is completed.
"PASS" indicates no problems with the emulator.
Click on the [QUIT] button to end the self-checking program.
R20UT0398EJ0401 Rev.4.01
Mar 15, 2016
Figure A.10 Normal Completion of Self-Checking
Appendix A
Page 35 of 40