E1/E20 Emulator
38-pin user-system interface cable
User system
Figure 2.4
Connecting the User-System Interface Cable to the User System when the 14-Pin
Connector is in Use with the E20
Limit to the height on connector periphery:
For a case where the R0E000200CKA00 is used for connecting the E20 emulator to a 14-pin
connector:
When designing the layout of a user board with a 14-pin connector, do not mount other
components with a height of 10 mm or more within 5 mm of the connector on the user system.
R20UT0398EJ0401 Rev.4.01
Mar 15, 2016
9.4 mm
38-pin to 14-pin
conversion adapter
14-pin connector
7614-6002 or
2514-6002
10 mm
26.2 mm
38-pin to 14-pin conversion adapter (top view)
R0E000200CKA00
(include in the E20 package)
CAUTION
3M Japan Ltd.)
Page 21 of 40
Setup