Extreme Networks ExtremeWireless AP560h Installation Manual page 36

Power or Pressure Washing Guidelines
•
Use only commercially available ice-melt products.
Warning
Do not use cleaning agents, solvents, and ice-melt products that are
flammable, contain polycarbonate or rubber dissolving ingredients, uses
refined petrochemical materials, and any other materials that can damage a
concrete surface.
Note
Do not use the power washing equipment near power lines.
Note
Wear safety goggles with complete eye protection when using the power
washing equipment.
About This Task
You can pressure wash the access point and the surface around the access point to
remove dirt and debris.
Note
The best practice is to follow the pressure washing guidelines for longevity of
the access point parts.
Procedure
1. Use a prescribed pressure washing nozzle to wash the access point and the surface
around it.
2. Keep the pressure washing nozzle at least 24 in. away from the access point.
3.
36 ExtremeWireless™ AP560h Access Point
Install the Access Point