Extreme Networks ExtremeWireless AP560h Installation Manual page 12

AP560h purchase order information
AP560h purchase order information
Part number
AP560h-FCC
You can install the access point to a wall using the KT-147407-02 bracket parts
(+/-15 degree, 1-axis) or the MBO-ART02 (20 degree increments +/-80 degrees, 10 inch
extension).
Part number
KT-147407-02
The KT-147407-02 bracket kit can be used with KT-150173-01 extension arm for wall or
pole installations.
Note
You must purchase the KT-150173-01 extension arm separately.
12 ExtremeWireless™ AP560h Access Point
Description
Cloud-ready, Dual 5GHz, Dual-band,
Sensor radio, Dual Radio 802.11ax/ac/abgn,
4x4:4 MIMO Outdoor 11ax access point.
Internal 30deg/70deg Panel Antenna.
Domain: US and Columbia
Box contents
The KT-147407-02 bracket comes with three bracket
parts:
• Flat part with holes on the metal surface
• 1-axis tilt part
• Boxed pole part with step edges
Six hex-head M6 stainless-steel screws
Two hex-head M12 stainless-steel screws
Two hex-head M12 stainless-steel nuts
One URL card
AP560h Overview