Table 21: RJ-45 Management Port Connector Pinouts for the ACX6160
Pin
Signal
1
TRP1+
2
TRP1–
3
TRP2+
4
TRP3+
5
TRP3–
6
TRP2–
7
TRP4+
8
TRP4–
Console Port Connector Pinouts for the ACX6160
The console port (labeled CON) is an RS-232 serial interface that uses an RJ-45 connector to connect to
a console management device. The default baud rate for the console port is 9600 baud.
Table 22 on page 45
provides the pinout information for the RJ-45 console connector. An RJ-45 cable
and an RJ-45 to DB-9 adapter are supplied with the ACX6160.
NOTE: If your laptop or PC does not have a DB-9 plug connector pin and you want to connect
your laptop or PC directly to an ACX6160, use a combination of the RJ-45 cable and RJ-45 to
DB-9 adapter supplied with the router and a USB-to-DB-9 plug adapter. You must provide the
USB-to-DB-9 plug adapter.
Description
Transmit/receive data pair 1
Transmit/receive data pair 1
Transmit/receive data pair 2
Transmit/receive data pair 3
Transmit/receive data pair 3
Transmit/receive data pair 2
Transmit/receive data pair 4
Transmit/receive data pair 4
44