Uninstalling The Acx6160; Removing An Acx6160 From A Rack Or Cabinet - Juniper ACX6160 Hardware Manual

4. Place the SSD cover plate back on the chassis and tighten the eight captive screws securing the SSD
cover plate.

Uninstalling the ACX6160

IN THIS SECTION

Removing an ACX6160 from a Rack or Cabinet | 87

Removing an ACX6160 from a Rack or Cabinet
Before removing an ACX6160 from a rack:
Ensure that you have the following parts and tools available:
• A Phillips (+) screwdriver, number 2 or number 3, depending on the size of your rack mounting
screws.
If you need to relocate an installed ACX6160, use the procedure described in this topic. (The remainder
of this topic uses "rack" to mean "rack or cabinet." )
NOTE: When you remove multiple devices from a rack, remove the device at the top of the rack
first and proceed to remove the rest of the devices from top to bottom.
• Ensure that the rack is stable and secured to the building.
• Ensure that there is enough space to place the removed ACX6160 in its new location and along the
path to the new location.
• Read "General Safety Guidelines and Warnings" on page 103
Guidelines" on page 48.
• Safely power off the device.
and "ACX6160 Installation Safety
87