Table of Contents
Advertisement
T S - 4 0 0 U S E R G U I D E
THE PHONE DISPLAY
The phone display is used to show call information. When idle, the display
shows the number of missed calls.
MAKING A CALL
Calls can be initiated in a number of different ways:
Traditional — Lift the handset and dial the number.
Handsfree or headset — Press the
Call log — Dial from the call log. See the Call Log section for details on page 17.
Directory — Dial from the Phone Directory. See the Phone Directory section for
details on page 19.
One-touch speed dial — Press the desired "One Touch" speed dial key to call a
pre-programmed number. See the Using One-Touch Speed Dial section on page 18.
Outside line access code is dialed automatically before any number with 7 or
more digits stored in the call log, directory, or programmable speed dial keys.
If you use the telephone keypad to dial a number, please dial the outside line
access code before the number.
You can switch a call between the handset, speakerphone or headset during the
call by either lifting the handset, pressing the
REDIALING A CALL
REDIAL
1. Press the
redialed.
RECEIVING CALLS
When receiving calls, your phone will ring and the display will show caller
identity information if you are subscribed to Caller ID service.
To answer an incoming call,
Lift the handset, or
SPEAKER
Press the
Press
to answer the call in headset mode.
1 2
SPEAKER
button and the last number dialed will be automatically
button to answer the call in speaker phone mode, or
/
button and dial the number.
SPEAKER
/
W W W.T A L K S W I T C H . CO M
button.
Advertisement
Table of Contents
