Regional People Counting - HIKVISION DS-2XC6745G0-IZHS User Manual

Note
For certain device models, you need to enable People Management on VCA page first.
●
The function is only supported by certain device models.
●

10.5.1 Regional People Counting

It counts people in a predefined area and detects people number changes and crowded situation.
When the people number exception or waiting time exception occurs, the device can trigger an
alarm.
Refer to Set People Density to set people density detection.
Refer to Set People Exception Detection to set people exception detection.
Refer to Waiting Time Exception Detection to set waiting time exception detection.
Set People Density
This function detects the level of people density in the set rule region.
Before You Start
Go to VCA → Select Application , select People Management and click Next to enable the
●
function.
For the device supporting HEOP, go to VCA to import and enable People Management.
●
Steps
1. Go to VCA → Set Application → People Management → Regional People Counting → Rule .
2. Click Add to add a rule and set its name.
3. Set a rule.
People Number OSD
It displays the real-time people number in the live view window. You can drag the mouse to
adjust the OSD window location.
Note
People density detection (people density alarm) does not support Alarm Times Per Exception,
Alarm Interval and First Alarm Delay settings.
4. Click to draw a region in the live view window, left click the end-points in the live view
window to define the boundary of the set rule region, and right click to finish drawing.
Note
Up to 8 regions can be set at the same time.
●
Try not to overlap the regions.
●
5. Check People Density Alarm to enable the function.
Network Camera User Manual
90