Table of Contents
Advertisement
2.3 Installing Hard Drives
Removing and Installing Hard Drives
1. Power down the system and remove the power cord from the rear of the power supply
as described in Section 2.1 and remove the chassis cover as described in Section 2.2.
2. Disconnect all of the cables from the hard drive.
3. Press the release tab on the side of the hard drive carrier that is to be removed from the
hard drive bay.
4. Gently slide the hard drive carrier out of the hard drive bay.
Chapter 2 Maintenance and Component Installation
Release
Tab
Figure 2-1. Removing the Chassis Cover
17
3
Advertisement
Table of Contents
