Expansion Card Setup
The X10DSC+ motherboard has three PCI slots available to populate with expan-
sion cards..
Expansion Card
(Shown with MB removed during initial setup)
PCI Slot Setup for Expansion Cards
Installing Expansion Cards
1. Power down the system and disconnect the AC power cords from the power
supplies.
2. Pull the motherboard tray out only two inches and access the motherboard as
described at the beginning of this section.
3. Remove the screw holding the PCI slot cover on each PCI card slot you want
to use. Set this screw aside for later use.
4. Simultaneously slide the expansion card bracket into the PCI slot while plug-
ging the expansion card into the corresponding slot on the motherboard.
5. Secure each card to the motherboard tray using the screw previously set
aside.
6. Plug the power cords back into the power supplies, return the dual fan mo-
duel to the fan bay, replace the covers and power up the system.
Slots
Figure 6-17. PCI Card Slot
6-15
Chapter 6: Advanced Chassis Setup