Table of Contents
Advertisement
Power Fail LED
The Power Fail LED connection is
located on pins 5 and 6 of JF1. Re-
fer to the table on the right for pin
defi nitions.
Overheat LED (OH)
Connect an LED to the OH connection
on pins 7 and 8 of JF1 to provide ad-
vanced warning of chassis overheat-
ing. Refer to the table on the right for
pin defi nitions.
NIC2 (LAN2) LED
The LED connections for LAN2 are
on pins 9 and 10 of JF1. Attach LAN
LED cables to display network activ-
ity. See the table on the right for pin
defi nitions.
NIC1 (LAN1) LED
The LED connections for LAN1 are
on pins 11 and 12 of JF1. Attach LAN
LED cables to display network activ-
ity. See the table on the right for pin
defi nitions.
HDD LED
The HDD LED connection is located
on pins 13 and 14 of JF1. Attach the
hard drive LED cable here to display
disk activity (for any hard drives on
the system, including Serial ATA and
IDE). See the table on the right for
pin defi nitions
Chapter 5: Advanced Serverboard Setup
PWR Fail LED
Pin Defi nitions
Pin#
Defi nition
5
Vcc
6
Ground
OH/Fan Fail LED
Pin Defi nitions
Pin#
Defi nition
7
Vcc
8
Ground
NIC2 LED
Pin Defi nitions
Pin#
Defi nition
9
Vcc
10
Ground
NIC1 LED
Pin Defi nitions
Pin#
Defi nition
11
Vcc
12
Ground
HDD LED
Pin Defi nitions
Pin#
Defi nition
13
Vcc
14
HD Active
5-15
Advertisement
Table of Contents
