Transmission Using The Speaker - Sharp DX-C311 Operation Manual

TRANSMISSION USING THE SPEAKER

When the speaker is used to dial, the fax is sent after the number is dialed and the connection is established. If a person
answers, you will be able to hear his or her voice, but you will not be able to speak.
1
Telephone mode.
5 10 15 To
Condition
Settings
AAA AAA
Speaker Volume
CCC CCC
EEE EEE
GGG GGG
2
III III
Freq.
Sort Address
• In addition to specification by one-touch key, a destination can also be specified using a search number. You can
also directly enter a fax number with the numeric keys or look up a destination in a global address book. For more
information, see
• After touching the [Speaker] key, you can touch the [Speaker Volume] key to adjust the volume of the speaker. The
speaker volume changes each time the [Speaker Volume] key is touched. Adjust the volume to the desired level.
Wait until the connection is made and then press the [BLACK & WHITE START]
key.
Transmission begins.
3
To cancel transmission...
Touch the [Speaker] key before the [BLACK & WHITE START] key is pressed. The line will be disconnected and
transmission will stop.
• When the speaker is used, transmission takes place without scanning the original into memory.
• A destination that includes an F-code (sub-address and passcode) cannot be used.
• A one-touch key that has multiple destinations or has a non-fax destination cannot be used.
System Settings (Administrator): Speaker Settings
The default volume level of the speaker can be changed in the "Speaker Settings".
(3) (1)
Speaker Resend
Cc
BBB BBB
DDD DDD
FFF FFF
HHH HHH
JJJ JJJ
ABCD EFGH IJKL MNOP QRSTU VWXYZ
Fax Manual
Reception
Fax Memory:100%
"ENTERING DESTINATIONS" (page 4-16).
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
When the document glass is used, only one page can be
transmitted.
When the original is a different size than the size setting, set
the original size.
☞
SPECIFYING THE SCAN SIZE AND SEND SIZE
Enter the destination fax number.
(1) Touch the [Speaker] key.
You will hear the dial tone through the machine's speaker.
(2) Touch the [Address Book] key in the base
1
2
screen.
For the [Address Book] key, see
FAX MODE" (page 4-8).
(3) Touch the one-touch key of the desired
etc. destination.
A group key cannot be used.
4-36
FACSIMILE
(page )
4-45
"BASE SCREEN OF
Contents