Page 1: Operation Guide
OPERATION GUIDE Search based on Search based on Search using the Search using the what you want to do what you want to do table of contents table of contents BEFORE USING THE MACHINE COPIER PRINTER MAKE A COPY PRINT A DOCUMENT SEND A FAX FACSIMILE SCANNER / INTERNET FAX...
Page 2: Make A Copy
MAKE A COPY Conserve Reduce copy Make a copy of this Make a copy on mistakes type of original this type of paper Add the date or Assemble output page numbers into a pamphlet Other convenient functions...
Page 3 Conserve Copy multiple pages on Copy on both sides of the one side of one sheet of paper paper Copy on the front and back of a card...
Page 4 Reduce copy mistakes Check the number of Print one set of copies for scanned pages before proofing making copies...
Page 5 Make a copy of this type of original More original pages than Mixed color and black & white originals can be loaded at once Mixed-size originals Bulky original (shadows appear at edges)
Page 6 Make a copy on this type of paper Transparency film Envelopes and other special media...
Page 7 Add the date or page numbers Add the date Add a stamp Add the page number Add text...
Page 8 Assemble output into a pamphlet Create a blank margin for Create a pamphlet punching...
Page 9: Other Convenient Functions
Other convenient functions Functions used for specific purposes Make a copy of arranged photos Make a mirror-image copy Copy onto the center of the paper Make a negative copy Convenient functions Give priority to a copy job Check the status of a reserved job Adjust the color...
Page 10: Print A Document
PRINT A DOCUMENT Conserve Print without a Print attractive Assemble output computer output into a pamphlet Print on this type Add text or an of paper image Other convenient functions...
Page 11 Conserve Print on both sides of the Print multiple pages on one paper side of the paper...
Page 12 Print without a computer F T P Print a file on an FTP Print a file in a USB memory device Print a file in a network Print a file stored in the folder machine...
Page 13 Print attractive output Print matching the size of Adjust the brightness and the paper contrast Print using color settings Bring out faint text and suitable for the data lines Select the print mode...
Page 14 Assemble output into a pamphlet Create a blank margin for Create a pamphlet punching Print specific pages on the front side of the paper...
Page 15 Print on this type of paper Transparency film Envelopes Print specific pages on Rotate the image 180 different paper degrees...
Page 16 Add text or an image Add a watermark to print Overlay an image on the data print data Overlay a fixed form on the print data...
Page 17 Other convenient functions Correct the size or orientation of the print data Enlarge or reduce the print image Print a mirror-image Security is important Print confidentially Print an encrypted PDF file Functions used for specific purposes Print an "invoice copy" Create a large poster Convenient functions Give priority to a print job...
Page 18 SEND A FAX Conserve Send this type of Prevent transmission to Send a clear document the wrong destination document Save trouble Security is important Other convenient functions...
Page 19 Conserve Send when the rate is Check received data before lowest printing Relay a transmission through a branch office...
Page 20 Send this type of document More original pages than Bulky original (shadows appear at edges) can be loaded at once Mixed-size originals Original printed on both sides ID card or other card...
Page 21 Prevent transmission to the wrong destination Check the destination once Check the result of more before sending transmission Check the log of previous transmissions...
Page 22 Send a clear document Adjust the exposure Adjust the image quality Specify the size before Send without shadows at sending the edges...
Page 23 Save trouble Store frequently used Send to multiple settings destinations X X X X - 6 7 8 9 X X X X - 6 7 8 9 X X X X - 9 8 7 4 X X X X - 9 8 7 4 View the transmission log Easily specify an address X X X X - 4 5 6 7...
Page 24 Security is important Check the destination once Send confidentially more before sending Initiate reception of a Print protected reception document from a sending data machine Send a document at the other machine's request...
Page 25 Other convenient functions Convenient management functions Forward a received fax to a network address Print a list of addresses Convenient functions Select a transmission destination from a global address book Give priority to a transmission Use an extension phone...
Page 26 SCAN AN IMAGE / SEND AN INTERNET FAX Send a clear Send this type of Prevent transmission to Send a smaller image document the wrong destination file Save trouble Scan from my computer Other convenient functions...
Page 27 Send a clear image Adjust the contrast or Adjust the resolution image quality before sending Send without shadows at Suppress the background of the edges a transmitted document...
Page 28 Send this type of document More original pages than Bulky original (shadows appear at edges) can be loaded at once Mixed-size originals Original printed on both sides Original with background...
Page 29 Prevent transmission to the wrong destination Check the result of Check the log of previous transmission transmissions...
Page 30 Send a smaller file Send at low resolution Compress a file before sending Reduce an image before Send an image in black & sending white ID or other card...
Page 31 Save trouble Store frequently used Send to multiple settings destinations a a a @ a a . a a . c a a a @ a a . a a . c o b b b @ b b . b b . b b b @ b b .
Page 32 Other convenient functions Convenient management functions Forward a received fax to a network address Print a list of transmission destinations Convenient functions Select a transmission destination from a global address book Send at a specified time Give priority to a transmission Send in USB memory mode...
Page 33 SAVE A JOB AND REUSE IT LATER Search for a file Organize my files Save an important Print a batch of document files...
Page 34 Search for a file Search for a file using a Search by checking the keyword contents of files...
Page 35 Organize my files Delete a file Delete all files Periodically delete files Change the folder...
Page 36 MAINTAIN THE MACHINE Replace the toner Clean the Replace a toner collection container machine cartridge...
Page 37: Clean The Machine
Clean the machine Clean the document glass and Clean the main charger of automatic document feeder the photoconductive drum Clean the original feed Clean the bypass feed roller roller Clean the laser unit...
Page 38 ABOUT OPERATION GUIDE There are two ways to search for a topic in this guide: you can use an "I want to..." menu, or you can use a regular table of contents. The following explanation assumes that Adobe Reader 8.0 is being used (Some buttons do not appear in the default state.).
Page 39: How To Use This Manual
HOW TO USE THIS MANUAL Click a button below to move to the page that you wish to view. (1) (2) (3) BEFORE USING THE MACHINE BEFORE USING THE MACHINE This section provides basic information about the machine. Please read this chapter before using the machine. PART NAMES AND FUNCTIONS EXTERIOR (5) (6)
Page 40: Manuals Provided With The Machine
MANUALS PROVIDED WITH THE MACHINE Operation manuals in PDF format (this manual) The manuals in PDF format provide detailed explanations of the procedures for using the machine in each mode. To view the PDF manuals, download them from the hard drive in the machine. The procedure for downloading the manuals is explained in "How to read the Operation Guide"...
Page 41 SHARP Service Department. • Aside from instances provided for by law, SHARP is not responsible for failures occurring during the use of the product or its options, or failures due to incorrect operation of the product and its options, or other failures, or for any damage that occurs due to use of the product.
Page 42: Table Of Contents
REPLACING THE TONER CARTRIDGES..1-49 SHARP OSA ......1-26 REPLACING THE TONER COLLECTION CONTAINER .
Page 43: Part Names And Functions
BEFORE USING THE MACHINE BEFORE USING THE MACHINE This section provides basic information about the machine. Please read this chapter before using the machine. PART NAMES AND FUNCTIONS EXTERIOR (5) (6) Handle Front cover Grasp them when moving the machine. Open this cover to replace a toner cartridge.
Page 44 BEFORE USING THE MACHINE (10) (11) (12) USB connector (A type) (11) Tray 2 (when a paper feed unit is installed)* Supports USB 2.0 (Hi-Speed). This holds paper. ☞ This is used to connect a USB device such as USB TRAY SETTINGS FOR TRAY 1 TO 2 (page 1-33) memory to the machine.
Page 45: Interior
BEFORE USING THE MACHINE INTERIOR (13) (14) (15) (17) (18) (19) (20) (16) (13) Toner cartridges (16) Toner collection container These contain toner for printing. When the toner runs out This collects excess toner that remains after printing. ☞ in a cartridge, the cartridge of the color that ran out must REPLACING THE TONER COLLECTION be replaced.
Page 46: Automatic Document Feeder And Document Glass
BEFORE USING THE MACHINE AUTOMATIC DOCUMENT FEEDER AND DOCUMENT GLASS Paper feed roller Original exit tray This roller rotates to automatically feed the original. Originals are delivered to this tray after scanning. Document feeding area cover Scanning area Open this cover to remove an original misfeed or clean Originals placed in the document feeder tray are scanned the paper feed roller.
Page 47: Side And Back
BEFORE USING THE MACHINE SIDE AND BACK USB connector (A type) LAN connector Supports USB 2.0 (Hi-Speed). Connect the LAN cable to this connector when the This is used to connect a USB device such as USB machine is used on a network. memory to the machine.
Page 48: Operation Panel
BEFORE USING THE MACHINE OPERATION PANEL [SYSTEM SETTINGS] key ( Numeric keys Press this key to display the system settings menu These are used to enter the number of copies, fax screen. The system settings are used to configure paper numbers, and other numerical values.
Page 49 BEFORE USING THE MACHINE (10) (11) (12) (13) (14) (15) (16) (17) (10) [LOGOUT] key ( (14) [POWER] key ( Press this key to log out after you have logged in and Use this key to turn the machine power on and off. ☞...
Page 50: Touch Panel
BEFORE USING THE MACHINE TOUCH PANEL This section explains how to use the touch panel. Messages and keys are displayed in the touch panel display to enable various operations to be performed. [JOB STATUS] key ( [HOME] key ( [SYSTEM SETTINGS] key ( Display •...
Page 51 BEFORE USING THE MACHINE Example 2 Example 3 Special Modes Special Modes Cancel Margin Shift Margin Shift Erase Down Pamphlet Copy Transparency Multi Shot Right Left Inserts Side 1 Side 2 Build Business ID Card (0~1) (0~1) Card Shot inch inch Card Scan Copy...
Page 52: Status Display
BEFORE USING THE MACHINE STATUS DISPLAY When the base screen of a mode appears, the right side of the touch panel shows the machine's status. The information shown is explained below. Example: Basic screen of copy mode Copies in progress from tray 1. Job Status Job Status Interrupt...
Page 53: System Bar
BEFORE USING THE MACHINE SYSTEM BAR The system bar appears at the bottom of the touch panel. The items that appear in the system bar are explained below. MFP Status Color Mode Special Modes 020/015 Full Color 2-Sided Copy Copying Plain Output 020/015...
Page 54 BEFORE USING THE MACHINE The icon appears when the machine is communicating with an external application. This appears when the IC card reader is connected. This appears when the IC card reader is communicating with the machine. This appears when the IC card reader is not securely connected.
Page 55: Turning The Power On And Off
BEFORE USING THE MACHINE TURNING THE POWER ON AND OFF The machine has two power switches. The main power switch is at the left side. The other power switch is the [POWER] key ( ) on the operation panel. Main power switch [POWER] key When the main power switch is switched on, the main power indicator on the operation panel lights up.
Page 56: Energy Save Functions
BEFORE USING THE MACHINE ENERGY SAVE FUNCTIONS This product has the following energy save functions that help conserve natural resources and reduce environmental pollution. Eco Scan Setting Non-print functions such as image sending and document filing function can be executed while the fusing unit is kept Off. Power Management Setting The power management setting includes preheat mode, auto power shut-off mode, and other functions that reduce power consumption while in a waiting state.
Page 57: User Authentication
BEFORE USING THE MACHINE USER AUTHENTICATION User authentication restricts the use of the machine to users that have been registered. The functions that each user is allowed to use can be specified, allowing the machine to be customized to meet the needs of your workplace. When the administrator of the machine has enabled user authentication, each user must log in to use the machine.
Page 58 BEFORE USING THE MACHINE Touch the [OK] key. User Authentication After the entered user number is authenticated, the user count screen will appear briefly. Usage status: used/remaining pages Black-white : 87,654,321/12,345,678 Full color : 87,654,321/12,345,678 2-color : 87,654,321/12,345,678 Single color: 87,654,321/12,345,678 Admin Login When page limits have been set in "Pages Limit Group List"...
Page 59: Authentication By Login Name / Password
BEFORE USING THE MACHINE AUTHENTICATION BY LOGIN NAME / PASSWORD The following procedure is used to log in using a login name and password received from the administrator of the machine or the administrator of the LDAP server. User Authentication Login Name User Name Password...
Page 60 BEFORE USING THE MACHINE Touch the [Password] key. User Authentication A text entry screen for entering the password will appear. Enter your password that is stored in "User List" in the system Login Name settings (administrator). User Name User 0001 Password If you are logging in to an LDAP server, enter the password that Auth to:...
Page 61 BEFORE USING THE MACHINE Touch the [OK] key. User Authentication After the entered login name and password are authenticated, the user count screen will appear briefly. Login Name User Name User 0001 Usage status: used/remaining pages Password Black-white : 87,654,321/12,345,678 Full color : 87,654,321/12,345,678 Auth to: Login Locally...
Page 62: Home Screen
Application Keys It is possible to display a combined total of eight Sharp OSA application shortcuts and my menu shortcuts. Shortcuts to functions can be registered as keys in the my menu screen. When a shortcut key is touched, the screen for that function appears.
Page 63: Remote Operation Of The Machine
BEFORE USING THE MACHINE REMOTE OPERATION OF THE MACHINE The remote operation function allows you to operate the machine from your computer. When this function is added, the same screen as the operation panel screen appears on your computer. This allows you to operate the machine from your computer in the same way as if you were standing in front of the machine.
Page 64: Items Recorded In The Job Log
BEFORE USING THE MACHINE ITEMS RECORDED IN THE JOB LOG The machine records the jobs that are performed in the job log. The main information that is recorded in the job log is described below. • To make it easy to total the usage counts of differently configured machines, the items recorded in the job log are fixed, regardless of what peripheral devices are installed or the objective of the recording.
Page 65 BEFORE USING THE MACHINE Item name Description Main items Number of Reserved Number of specified sets or reserved destinations. Sets Number of Completed Number of completed sets or number of destinations to which Sets transmission was successfully completed. Number of Reserved Number of reserved original pages of a copy, print, scan job, or other Pages job.
Page 66 BEFORE USING THE MACHINE Item name Description Detailed Items Original Size Size of scanned original. For a document filing print job, the paper size of the file. Original Type Original type (text, printed photo, etc.) set in the exposure settings screen.
Page 67: Sharp Osa
Sharp OSA (Open Systems Architecture) is an architecture that enables external applications to be directly connected to a digital multifunction machine over a network. When a digital multifunction machine that supports Sharp OSA is used, the operation panel controls and functions of the machine such as scan send can be linked to an external application.
Page 68: External Account Application Setup
The two modes for using an external account application operate as explained below. External authentication mode When the [Enable Authentication by External Server] checkbox is selected in "External Account Setting" of "Sharp OSA Settings" in the system settings (administrator), the machine enters external authentication mode. When the machine is powered on in external authentication mode, the machine accesses the external account application and displays the login screen.
Page 69 OFF" (page 1-14). External count mode When only the [External Account Control] setting is enabled in "External Account Setting" of "Sharp OSA Settings" in the system settings (administrator), the machine enters external count mode. Unlike external authentication mode, when the machine is started in "external count mode", the login screen of the external account application is not displayed.
Page 70: Loading Paper
BEFORE USING THE MACHINE LOADING PAPER IMPORTANT POINTS ABOUT PAPER This section provides information that you should know before loading paper in the paper trays. Be sure to read this section before loading paper. NAMES AND LOCATIONS OF TRAYS The names of the trays are as follows. Bypass tray Tray 1 Tray 2*...
Page 71: Useable Paper
)). For paper specifications, see the specifications in the Quick Start Guide. • Pain paper other than SHARP standard paper (16 lbs. to 28 lbs. (60 g/m to 105 g/m Recycled paper, colored paper and pre-punched paper must meet the same specifications as plain paper. Contact your dealer or nearest SHARP Service Department for advice on using these types of paper.
Page 72: Print Side Face Up Or Face Down
BEFORE USING THE MACHINE Print side face up or face down Paper is loaded with the print side face up or face down depending on the paper type and tray. The loading orientation of punched paper, letterhead paper, and pre-printed paper differs from that of other paper. For details, see Example: Placement orientations of punched paper, letter head paper, and pre-printed paper.
Page 73 • The image quality and toner fusibility of paper may change due to ambient conditions, operating conditions, and paper characteristics, resulting in image quality inferior to that of SHARP standard paper. Contact your dealer or nearest SHARP Service Department for advice on using these types of paper.
Page 74: Tray Settings For Tray 1 To 2
BEFORE USING THE MACHINE TRAY SETTINGS FOR TRAY 1 TO 2 LOADING PAPER AND CHANGING THE PAPER SIZE A maximum of 250 sheets of paper from size 5-1/2" x 8-1/2" to 8-1/2" x 11" (A5 to A4) can be loaded in trays 1. A maximum of 500 sheets of paper from size 5-1/2"...
Page 75 BEFORE USING THE MACHINE Load paper into the tray. • Load the paper with the print side face up. Make sure the Line on the guide stack of paper is straight before loading it. • Place the paper under the roller on the right side of the tray. •...
Page 76: Loading Paper In The Bypass Tray
BEFORE USING THE MACHINE LOADING PAPER IN THE BYPASS TRAY The bypass tray can be used to print on plain paper, envelopes, label sheets, and other special media. Up to 50 sheets of paper can be loaded (up to 20 sheets of heavy paper) for continuous printing similar to the other trays. To feed an envelope, first press down the fusing unit release levers (2 places) to release the pressure, and then follow the steps below.
Page 77 BEFORE USING THE MACHINE Insert the paper (print face down) all the way into the bypass tray. To prevent a misfeed, verify once more that the paper guides are adjusted to the width of the paper. Caution After feeding an envelope, be sure to press up and return the fusing unit release levers (2 places) to their original positions.
Page 78: Important Points When Using The Bypass Tray
IMPORTANT POINTS WHEN USING THE BYPASS TRAY • When using plain paper other than SHARP standard paper or special media other than SHARP-recommended transparency film, or when printing on the reverse side of previously used paper, the paper must be loaded one sheet at a time.
Page 79: Loading Envelopes
BEFORE USING THE MACHINE Loading envelopes When inserting envelopes in the bypass tray, place them aligned to the left side in the orientation shown below. Only the front side of envelopes can be printed on. Be sure to place the front side face down. Important points when using envelopes •...
Page 80: Originals
BEFORE USING THE MACHINE ORIGINALS This section explains how to place originals in the automatic document feeder and on the document glass. PLACING THE ORIGINAL PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER This section explains how to place originals in the automatic document feeder. Allowed original sizes Minimum original size Maximum original size...
Page 81 BEFORE USING THE MACHINE Adjust the original guides to the size of the originals. Pull out the extension tray in the original exit. Place the original. Make sure the edges of the originals are even. Indicator Insert the originals face up all the way into the document feeder line tray.
Page 82: Placing The Original On The Document Glass
BEFORE USING THE MACHINE PLACING THE ORIGINAL ON THE DOCUMENT GLASS This section explains how to place the original on the document glass. Allowed original sizes When the original is a non-standard size, see the Maximum original size appropriate explanation below for the mode you are using.
Page 83 BEFORE USING THE MACHINE Close the automatic document feeder. After placing the original, be sure to close the automatic document feeder. If left open, parts outside of the original will be copied black, causing excessive use of toner. Caution • Close the automatic document feeder slowly. Abruptly closing the automatic document feeder may damage it. •...
Page 84: Peripheral Devices
Sharpdesk 10 license kit MX-US10 and computer files. Sharpdesk 50 license kit MX-US50 Sharpdesk 100 license kit MX-USA0 Sharp OSA Network Scanner Tool MX-UN01A 1 Licence Kit Sharp OSA Network Scanner Tool MX-UN05A 5 Licence Kit Sharp OSA Network Scanner Tool...
Page 85: Maintenance
BEFORE USING THE MACHINE MAINTENANCE This section explains how to clean the machine and replace the toner cartridges and the toner collection container. REGULAR MAINTENANCE To ensure that the machine continues to provide top quality performance, periodically clean the machine. Warning Do not use a flammable spray to clean the machine.
Page 86: Cleaning The Main Charger Of The Photoconductive Drum
BEFORE USING THE MACHINE CLEANING THE MAIN CHARGER OF THE PHOTOCONDUCTIVE DRUM If black lines or colored lines appear even after you have cleaned the document glass and automatic document feeder, use the charger cleaner to clean the main charger. Procedure of "REPLACING THE TONER COLLECTION CONTAINER"...
Page 87: Cleaning The Bypass Feed Roller
BEFORE USING THE MACHINE CLEANING THE BYPASS FEED ROLLER If paper misfeeds frequently occur when feeding envelopes or heavy paper through the bypass tray, wipe the surface of the feed roller with a clean soft cloth moistened with water or a neutral detergent. Bypass feed roller CLEANING THE ORIGINAL FEED ROLLER If lines or other dirt appear on the scanned original when the automatic document feeder is used, wipe the surface of the...
Page 88: Cleaning The Laser Unit
BEFORE USING THE MACHINE CLEANING THE LASER UNIT When the laser unit inside the machine becomes dirty, line patterns (colored lines) may form in the printed image. Identifying lines (colored lines) caused by a dirty laser unit. If the above problems occur, follow the steps below to clean the laser unit. Turn the power switch off.
Page 89 BEFORE USING THE MACHINE Repeat step 4 to clean all holes in the laser unit (4 holes). There are a total of 4 places to be cleaned in the laser unit, including the hole cleaned in step 4. Clean all holes. Cover Replace the cleaning tool.
Page 90: Replacing The Toner Cartridges
BEFORE USING THE MACHINE REPLACING THE TONER CARTRIDGES Be sure to replace the toner cartridge when the message "Change the toner cartridge." appears. In copy mode Ready to scan for copy. If you continue to use the machine without replacing the cartridge, the following message will appear when the toner runs out.
Page 91: Cartridge Out
BEFORE USING THE MACHINE Open the front cover. Push on both ends of the front cover and open it. Locations of color toner cartridges (A): Yellow (B): Magenta (C): Cyan (D): Black Grasp the handle of the top and bottom of the toner cartridge, pull the toner cartridge out.
Page 92 BEFORE USING THE MACHINE Press the center of the toner cartridge until the cartridge locks into place. Close the front cover. The message will be cleared and printing will be possible. • Even after a new toner cartridge is installed, the message may still appear, indicating that printing cannot be resumed (toner is not fed sufficiently).
Page 93: Replacing The Toner Collection Container
BEFORE USING THE MACHINE REPLACING THE TONER COLLECTION CONTAINER The toner collection container collects excess toner that is produced during printing. When the toner collection container becomes full, "Replace used toner container." will appear. Follow the procedure below to replace the toner collection container.
Page 94 BEFORE USING THE MACHINE Install a new toner collection container. Push the toner collection container in completely. Close the front cover. You cannot close the front cover when the toner collection container is not attached. Replace tray 1. Caution • Do not throw the toner collection container into a fire. Toner may fly and cause burns. •...
Page 95: Entering Text
BEFORE USING THE MACHINE ENTERING TEXT This section explains the text entry screen. FUNCTIONS OF THE MAIN KEYS Description This changes the text entry screen from the lower case screen to the upper case screen. The upper case screen will continue to appear until the [Caps] key is touched again so that it is no longer highlighted. The Caps [Caps] key is convenient when you wish to enter all capital letters.
Page 96: Keyboard
The layout of the keys in the text entry screen in the touch panel differs slightly from the layout of the keys on the external keyboard. Use a SHARP-recommended external keyboard. For the recommended keyboards, please contact your dealer or nearest SHARP Service Department. 1-55 Contents...
Page 97 CHAPTER 2 COPIER This chapter provides detailed explanations of the procedures for using the copy function. OUTPUT ....... . . 2-32 BEFORE USING THE MACHINE AS A •...
Page 98 COPIER [Image Edit] KEY ......2-79 CONVENIENT COPY FUNCTIONS • REPEATING PHOTOS ON A COPY INTERRUPTING A COPY RUN (Interrupt (Photo Repeat) .
Page 99: Before Using The Machine As Acopier
COPIER BEFORE USING THE MACHINE AS A COPIER This section provides information that you should know before using the machine as a copier. BASE SCREEN OF COPY MODE Touch the [COPY] key in the touch panel to open the base screen of copy mode. The base screen shows messages and keys necessary for copying, and settings that have been selected.
Page 100: Tray During Paper Feeding
COPIER Paper select display (13) [Output] key This shows the size of paper loaded in each tray. Touch this to select an output function such as sort, or For the bypass tray, the paper type appears above the group. ☞ paper size.
Page 101 COPIER Customizing displayed keys Special mode keys and other keys can be displayed in the base screen. By assigning frequently used functions to these keys, you can access the functions with a single touch. To change the function that is assigned to a key, use "Customize Key Setting"...
Page 102: Copying Sequence
COPIER COPYING SEQUENCE This section explains the basic procedure for copying. Select settings in the order shown below to ensure that the copy operation takes place smoothly. For detailed procedures for selecting the settings, see the explanation of each setting in this chapter. Place the original.
Page 103: Output Settings
COPIER Output settings Select copy output settings. Output The main settings are as follows: ☞ • Sort mode Sort mode (page 2-33) ☞ • Group mode Group mode (page 2-33) Sort Group Special mode settings Select special modes such as "Margin Shift" and "Erase". ☞...
Page 104 COPIER • When one or more special modes are selected, the key appears in the base screen. Touch the key to display a list of the selected special modes. This lets you check what special modes are selected and the settings of each mode. ☞...
Page 105: Originals
COPIER ORIGINALS CHECKING THE ORIGINAL SIZE When an original size is set, the paper size that appears in the [Original] key is the paper size that is set in "Default Original Size Settings" in the system settings (administrator). To change the original size to a different size from the size shown in the [Original] key, touch the [Original] key and set the original size.
Page 106: Paper Trays
COPIER PAPER TRAYS The machine is set to automatically select a tray that has the same size of paper as the size of the placed original (automatic paper tray selection). If the correct paper size is not selected or you wish to change the paper size, you can select the paper tray manually. Touch the [Paper Select] key.
Page 107: Basic Procedure For Making Copies
COPIER BASIC PROCEDURE FOR MAKING COPIES This section explains the basic procedures for making copies, including selection of the copy ratio and other copy settings. MAKING COPIES USING THE AUTOMATIC DOCUMENT FEEDER TO MAKE COPIES This section explains how to make copies (1-sided copies of 1-sided originals) using the automatic document feeder. Place the originals face up in the document feeder tray with the edges Indicator...
Page 108 COPIER Set the number of copies (number of sets) with the numeric keys. Special Modes 2-Sided Copy Plain 8½x11 Up to 999 copies (sets) can be set. If an incorrect number of copies is set... Press the [CLEAR] key ( ) and then enter the correct number.
Page 109: Making A Copy Using The Document Glass
COPIER MAKING A COPY USING THE DOCUMENT GLASS To make a copy of a book or other thick original that cannot be scanned with the automatic document feeder, open the automatic document feeder and place the original on the document glass. This section explains how to make a copy (1-sided copy of a 1-sided original) using the document glass.
Page 110 COPIER Set the number of copies (number of sets) with the numeric keys. Special Modes 2-Sided Copy Plain 8½x11 Up to 999 copies (sets) can be set. If an incorrect number of copies is set... Press the [CLEAR] key ( ) and then enter the correct number.
Page 111: Automatic 2-Sided Copying
COPIER AUTOMATIC 2-SIDED COPYING USING THE AUTOMATIC DOCUMENT FEEDER TO MAKE 2-SIDED COPIES Originals Originals Copies Originals Copies Copies Automatic 2-sided copying of 1-sided Automatic 2-sided copying of 2-sided 1-sided copying of 2-sided originals originals originals Copying onto both sides of a sheet saves paper. Place the originals face up in the document feeder tray with the edges Indicator...
Page 112: Using The [Binding Change] Key
COPIER Check the paper to be used and the Color Mode Special Modes color mode. Full Color 2-Sided Copy Make sure that the desired paper (tray) and color mode are Plain Output 8½x11 Exposure selected. Auto File • To change the original size, touch the [Original] key. 8½x11 ☞...
Page 113: Automatic 2-Sided Copying Using The Document Glass
COPIER AUTOMATIC 2-SIDED COPYING USING THE DOCUMENT GLASS Originals Copies Automatic 2-sided copying of 1-sided originals Open the automatic document feeder, place the original face down on the document glass, and then gently close the automatic document feeder. Document glass scale mark 5-1/2"...
Page 114 COPIER Select the 2-sided copy mode. 2-Sided Copy (1) Touch the [1-Sided to 2-Sided] key. (2) Touch the [OK] key. Binding Change The [2-Sided to 2-Sided] key and [2-Sided to 1-Sided] key cannot be used when copying from the document glass. Check the paper to be used and the Color Mode Special Modes...
Page 115 COPIER Touch the [Read-End] key. Place next original. Press [Start]. When finished, press [Read-End]. Read-End To cancel scanning of the original and copying... Press the [STOP] key ( System Settings (Administrator): Initial Status Settings (2-Sided Copy) The default 2-sided copy mode can be changed. 2-19 Contents...
Page 116: Copy Color Modes
COPIER COPY COLOR MODES The color mode of the [COLOR START] key is normally set to [Full Color] so that copying takes place in full color mode when the [COLOR START] key is pressed. If color originals are mixed together with black & white originals, set the color mode to [Auto] to have the color mode change appropriately for each original.
Page 117 COPIER Selecting single color copying When [Single Color] is selected for the color mode, the following screen appears. Touch the desired color and touch the [OK] key. Color Mode Single Color R(Red) G(Green) B(Blue) C(Cyan) M(Magenta) Y(Yellow) Selecting 2 color copying When [2 Color] is selected for the color mode, the following screen appears.
Page 118: Changing The Exposure And Original Image Type
COPIER CHANGING THE EXPOSURE AND ORIGINAL IMAGE TYPE The exposure and original image type can be selected to obtain a clear copy. AUTOMATIC ADJUSTMENT OF THE EXPOSURE AND ORIGINAL TYPE Automatic exposure adjustment operates by default to automatically adjust the exposure level and original type as appropriate for the original being copied.
Page 119 COPIER Adjust the exposure level. Exposure Touch the key to make the copy darker. Auto Touch the key to make the copy lighter. Manual Original Image Type • Using a copy or printed page as an original Text/ Text/Photo Text When using a copy or printed page from the machine as an Prtd.Photo Printed...
Page 120: Reduction/Enlargement/Zoom
COPIER REDUCTION/ENLARGEMENT/ZOOM AUTOMATIC RATIO SELECTION (Auto Image) This section explains the automatic ratio selection function (Auto Image), which automatically selects the ratio to match the paper size. When the paper tray is manually changed, the [Auto Image] key appears in the base screen of copy mode. Touch the [Auto Image] key to have the reduction or enlargement ratio automatically selected based on the original size and the selected paper size.
Page 121: Manually Selecting The Ratio (Preset Ratios/Zoom)
COPIER MANUALLY SELECTING THE RATIO (Preset ratios/Zoom) Touch the [Copy Ratio] key in the base screen of copy mode to select one of five preset enlargement ratios or four preset reduction ratios (maximum 400%, minimum 25%). In addition, the zoom keys can be used to select any ratio from 25% to 400% in increments of 1%. Set the ratio.
Page 122 COPIER Touch the [OK] key. o p y R a t i o After touching the [OK] key, make sure that a paper size suitable for the ratio is selected. 6 4 % 1 2 1 % 8 ½ x 1 1 5 ½...
Page 123: Enlarging/Reducing The Length And Width Separately (Xy Zoom)
COPIER ENLARGING/REDUCING THE LENGTH AND WIDTH SEPARATELY (XY Zoom) The XY Zoom feature allows the horizontal and vertical copy ratios to be changed separately. Both the horizontal and vertical ratios can be set from 25% to 400% in increments of 1%. Touch the [Copy Ratio] key in the base screen of copy mode and then follow the steps below.
Page 124: Original Sizes
COPIER ORIGINAL SIZES SPECIFYING THE ORIGINAL SIZE When the original size is a non-standard size or you wish to change the original size, manually specify the original size. Touch the [Original] key in the base screen of copy mode and then follow the steps below. Specifying an inch original size (1) Touch the appropriate original size key.
Page 125: Storing Frequently Used Original Sizes
COPIER Enter the original size. (1), (2) (1) Enter the X (horizontal) dimension of the Original original. Cancel Size Input With the [X] key highlighted, enter the X (horizontal) dimension of the original with the keys. When the (1~14) inch document glass is used, a number from 1"...
Page 126 COPIER Store the original size. Original (1) Touch the [Store/Delete] tab. Custom Size (2) Touch a key for storing a custom original X15½ Y 8½ size. Touch a key that does not show a size ( Recall Store/Delete If you wish to edit or clear a previously stored key... Touch the key that you want to edit or clear.
Page 127: Retrieving A Stored Original Size
COPIER Retrieving a stored original size To retrieve a stored original size, touch the [Original] key in the base screen of copy mode and perform the steps below. Touch the [Custom Size] key. Original 8½x14 8½x13 8½x13 8½x11 5½x8½ Inch Size Input Custom Size Retrieve the desired stored original size.
Page 128: Output
COPIER OUTPUT To select output functions and the output tray, touch the [Output] key in the base screen of copy mode. Output functions that can be selected are sort and group. Output Right Tray Offset Tray Offset Sort Staple Punch Sort Group [Sort] key...
Page 129: Output Modes
COPIER OUTPUT MODES This section explains the output modes. Sort mode Group mode This is used to sort (collate) output into sets. This function groups copies by page. Example: Sorting the output into 5 sets Example: Groups of 5 copies of each page Originals Output Originals...
Page 130: Making Copies Using The Bypass Tray
COPIER MAKING COPIES USING THE BYPASS TRAY In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, and other special media. For detailed information on paper that can be loaded in the bypass tray, see "IMPORTANT POINTS ABOUT PAPER"...
Page 131: Set The Paper Size
COPIER Check the paper type setting for the Paper Select bypass tray. If you need to change the Paper Tray Bypass Tray setting, touch the paper type key. 8½x11 1. 8½x11 Plain If you do not need to change the paper size and type that Plain 2.
Page 132 COPIER Select the bypass tray. (1) Touch the paper size key of the bypass tray. Paper Select (2) Touch the [OK] key. Paper Tray Bypass Tray 8½x11 1. 8½x11 Plain Plain 2. 8½x11R Plain Press the [COLOR START] key or the [BLACK & WHITE START] key. Scanning begins.
Page 133: Special Modes
COPIER SPECIAL MODES This chapter explains Margin Shift, Erase, and other special modes. SPECIAL MODES When the [Special Modes] key is pressed in the base screen, the special modes menu screen appears. The special modes menu consists of two screens. Touch the keys to move between the screens.
Page 134 COPIER Special modes menu (2nd screen) Special Modes Proof Copy File Quick File Original Mixed Size Count Original [File] key [Original Count] key ☞ This saves a job in a folder of the document filing CHECKING THE NUMBER OF SCANNED function.
Page 135 COPIER [OK] key and [Cancel] key In some cases two [OK] keys and one [Cancel] key will appear in the special mode screens. The keys are used as follows: Special Modes Cancel Margin Shift Down Right Left Side 1 Side 2 (0~1) (0~1) inch...
Page 136: Adding Margins (Margin Shift)
COPIER ADDING MARGINS (Margin Shift) This function is used to shift the copy image right, left or down to adjust the margin. This is convenient when you wish to bind the copies with a string or in a binder. Shifting the image to the right so the copies can be bound at the left edge with a string Not using margin shift Using margin shift The punch holes cut off...
Page 137 COPIER Press the [COLOR START] key or the [BLACK & WHITE START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key.
Page 138: Erasing Peripheral Shadows (Erase)
COPIER ERASING PERIPHERAL SHADOWS (Erase) The erase function is used to erase shadows around the edges of copies that occur when copying thick originals or books. When a thick book is copied Not using the erase Using the erase function function Shadows appear on the Shadows do not appear on...
Page 139 COPIER Select the erase settings. (1) Touch the desired erase mode. Special Modes Select one of the four positions. Cancel Erase Touch the [Side Erase] key to open the following screen. Edge Erase Edge Erase Side Erase Cancel (0~1) inch Erase position for Side 2 Side Erase...
Page 140: Making Copies In Pamphlet Format (Pamphlet Copy)
COPIER MAKING COPIES IN PAMPHLET FORMAT (Pamphlet Copy) This function copies 2 original pages onto the front side and 2 original pages onto the reverse side of each sheet of paper so that the copies can be folded at the centerline to form a pamphlet. This function is convenient for arranging copies into an attractive booklet or pamphlet.
Page 141 COPIER Select pamphlet copy settings. Special Modes Cancel (1) If the original is 1-sided, touch the [1-Sided] Pamphlet Copy key. If the original is 2-sided, touch the [2-Sided] key. (2) Select the binding edge ([Left Binding] or Original Left Right 1-Sided 2-Sided [Right Binding]).
Page 142: Copying A Large Number Of Originals At Once (Job Build)
COPIER COPYING A LARGE NUMBER OF ORIGINALS AT ONCE (Job Build) When copying a very large number of originals, this function allows you to divide the originals into sets and feed each set through the automatic document feeder one set at a time. Use this function when you wish to copy all of the originals as a single job but the number of originals exceeds the maximum number that can be inserted.
Page 143 COPIER Insert the next set of originals and press the [COLOR START] key or the [BLACK & WHITE START] key. Repeat this step until all originals have been scanned. The copy settings (Exposure, Paper Select, and Copy Ratio only) can be changed for each set of originals. If you need to change the copy setting, follow the steps in "Changing the copy settings for each set of originals".
Page 144 COPIER Changing the copy settings for each set of originals The copy settings (Exposure, Paper Select, and Copy Ratio only) can be changed for each set of originals. Perform the step below before pressing the [Start] key to scan the originals in step 4 above. Touch the [Change] key.
Page 145: Adding Inserts When Copying On Transparency Film
COPIER ADDING INSERTS WHEN COPYING ON TRANSPARENCY FILM (Transparency Inserts) When copying on transparency film, the sheets may stick together due to static electricity. The transparency inserts function can be used to automatically insert a sheet of paper between each sheet of transparency film, making the sheets easy to handle.
Page 146 COPIER Select insert settings. (1) Select whether or not the insert paper will Special Modes be copied on ([Yes] or [No]). Cancel Transparency Inserts (2) Touch the [OK] key. Paper Tray Print on Insert Sheets You will return to the base screen of copy mode. Tray1 Explanation of (A) 8½x11...
Page 147: Copying Multiple Originals Onto One Sheet (Multi Shot)
COPIER COPYING MULTIPLE ORIGINALS ONTO ONE SHEET (Multi Shot) Multiple original pages can be copied onto a single sheet of paper in a uniform layout. Select 2in1 to copy two original pages onto one sheet, or 4in1 to copy four original pages onto one sheet. This function is convenient when you wish to present multiple pages in a compact format, or show a view of all pages in a document.
Page 148 COPIER Select the number of originals to be (3) (2) copied onto one sheet of paper, the Special Modes layout, and the border. Multi Shot Cancel (1) Touch the [2in1] key or the [4in1] key. Layout If needed, the images will be rotated. 2in1 4in1 (2) Select the layout.
Page 149: Copying Both Sides Of A Card On One
COPIER COPYING BOTH SIDES OF A CARD ON ONE SHEET OF PAPER (Card Shot) When copying a card, this function allows you to copy the front and reverse sides together onto a single sheet of paper. This function is convenient for making copies for identification purposes and helps save paper. Copies Originals Front...
Page 150 COPIER Select card shot settings. (1) Enter the original size. Special Modes With the [X] key highlighted, enter the X (horizontal) Cancel Card Shot dimension of the original with the keys. Touch the [Y] key and enter the Y (vertical) dimension of (1~8 1/2) Fit to the original with the...
Page 151 COPIER • The original must be placed on the document glass. • Copying is only possible on standard size paper. • XY Zoom cannot be used when using this function. • The image cannot be rotated when using this function. To cancel card shot...
Page 152: Copying The Front And Back Sides Of Id Card Onto A Page (Id Card Copy)
COPIER COPYING THE FRONT AND BACK SIDES OF ID CARD ONTO A PAGE (ID Card Copy) You can copy the front and back sides of ID card onto a page through this function. The layout of the ID card copy, set the "ID Card Copy Setting"...
Page 153 COPIER Turn the ID card over and press the [COLOR START] key or the [BLACK & WHITE START] key to scan the reverse side of the card. Use the same [START] key that you used for the front side of the card. To cancel scanning...
Page 154 COPIER COPYING MULTIPLE BUSINESS CARDS (Business Card Scan) Business Card Scan can be used to copy up to 8 business cards on one sheet of paper. 1-Sheet Layout 8-Sheet Layout Load the business cards. For original placement orientations and copy results, see "Copy results of 8-Sheet Layouts"...
Page 155 COPIER When the [1-Sheet Layout] key is selected, [XY Zoom] cannot be used. When the [8-Sheet Layout] key is selected, the following functions and paper cannot be used. • Zoom function • Auto Image • Label To cancel the business card scan setting... Touch the [Cancel] key in the screen of step 3.
Page 156: Printing The Date And A Stamp On Copies (Stamp)
COPIER PRINTING THE DATE AND A STAMP ON COPIES (Stamp) Use this function to print the date, a stamp, the page number, and text on copies. In addition, specific text can be added to a copy as a watermark (Watermark). Six printing positions are available: top left, top center, top right, bottom left, bottom center, and bottom right.
Page 157: General Procedure For Using Stamp
COPIER GENERAL PROCEDURE FOR USING STAMP To select stamp settings, follow the steps below. Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the [Stamp] key.
Page 158 COPIER Select Stamp. Special Modes For detailed information on each of the stamp items, see the Stamp Cancel following sections: Date: ADDING THE DATE TO COPIES (Date) Date Stamp (page 2-64) Page Stamp: STAMPING COPIES (Stamp) (page 2-66) Text Numbering Page numbering: PRINTING PAGE NUMBERS ON COPIES (Page Numbering)
Page 159 COPIER To cancel Stamp... Touch the [Cancel] key in the screen of step 3. 2-63 Contents...
Page 160: Adding The Date To Copies (Date)
COPIER ADDING THE DATE TO COPIES (Date) The date can be printed on copies. The position of the date, color, format, and page (first page only or all pages) can be selected. Example: Printing APRIL 4, 2020 in the top right corner of the paper. APR/04/2020 Touch the [Date] key in the stamp selection screen.
Page 161 COPIER Check the displayed date. If you need to Stamp change the date, touch the [Date Cancel Date Change] key. First Page YYYY/MM/DD Print Color Set the date that you wish to use and touch the [OK] key. Bk(Black) MM/DD/YYYY All Pages Stamp DD/MM/YYYY...
Page 162: Stamping Copies (Stamp)
COPIER STAMPING COPIES (Stamp) Text such as "CONFIDENTIAL" can be printed in white on a dark background as a "stamp" on copies. The position, color, size, density, and pages (first page only or all pages) can be selected for a stamp. Printing "CONFIDENTIAL"...
Page 163 COPIER Touch the [Print Color] key and set the Stamp color and density. Stamp Cancel Touch the color that you wish to use. CONFIDENTIAL PRIORITY First Page If you wish to darken the selected color, touch the key. If Print Color FOR YOUR INFO.
Page 164: Printing Page Numbers On Copies
COPIER PRINTING PAGE NUMBERS ON COPIES (Page Numbering) Page numbers can be printed on copies. The position, color, format, and page number can be selected for page numbering. Printing the page number at the bottom center of the paper. Touch the [Page Numbering] key in the stamp selection screen. See steps 1 to 4 of "GENERAL PROCEDURE FOR USING STAMP"...
Page 165 COPIER Touch the [Print Color] key. Stamp Touch the color that you wish to use. Page Numbering Cancel When you have finished selecting the settings, touch the [OK] Print Color key. Page Numbering Format Bk(Black) 1,2,3.. (1),(2),(3).. Total Page Stamp -1-,-2-,-3-..
Page 166 COPIER Touch the [OK] key. Stamp Page Number Auto Manual First Number Last Number Covers/Inserts Auto Counting Printing Starts from Page Touch the [OK] key. Stamp After touching the [OK] key, continue from step 5 of "GENERAL Cancel Page Numbering PROCEDURE FOR USING STAMP"...
Page 167: Printing Text On Copies (Text)
COPIER PRINTING TEXT ON COPIES (Text) Entered text can be printed on copies. Up to 30 frequently used text strings can be stored. Example: Printing "April 2020 Planning Meeting" in the top left corner of the paper April 2020 Planning Meeting Touch the [Text] key in the stamp selection screen.
Page 168 COPIER Touch the [Print Color] key. Stamp Touch the color that you wish to use. When you have finished Text Cancel selecting the settings, touch the [OK] key. First Page AAA AAA Stamp Print Color Print Color Pre-Set All Pages Bk(Black) Recall Store/Delete...
Page 169 COPIER Storing, editing, and deleting text strings Touch the [Text] key in the stamp selection screen. See steps 1 to 4 of "GENERAL PROCEDURE FOR USING STAMP" (page 2-61). Touch the [Store/Delete] key. Stamp Cancel Text First Page Print Color Pre-Set All Pages Bk(Black)
Page 170 COPIER Touch the [Back] key. Stamp Stamp You will return to the screen of step 2. Text Text Back To copy using a stored text string, continue from step 2 of "PRINTING TEXT ON COPIES (Text)" (page 2-71). Store/Delete Store/Delete No.01 AAA AAA No.02 BBB BBB No.03 CCC CCC...
Page 171: Checking The Stamp Layout (Layout)
COPIER CHECKING THE STAMP LAYOUT (Layout) After stamp items have been selected, you can check the print layout, change the print position, and delete stamp items. Touch the [Layout] key. Special Modes Special Modes Cancel Date Stamp Page Text Numbering Watermark Layout The [Layout] key can only be touched when stamp items have been selected.
Page 172 COPIER Touch the key of the desired destination Stamp position. Move Select the location to move the selected item. The touched position key is highlighted and the print position changes. The keys that show the print positions will appear as follows depending on the state of the settings.
Page 173: Adding A Watermark To Acopy (Watermark)
COPIER ADDING A WATERMARK TO A COPY (Watermark) When making a copy, specific text can be added to the copy as a watermark. The color, density, angle, and pages (first page only or all pages) can be selected for a watermark. The watermark is printed at the center of the paper. Printing "CONFIDENTIAL"...
Page 174 COPIER Touch the [Print Color] key and set the Stamp color and density. Watermark Cancel Touch the color that you wish to use. CONFIDENTIAL PRIORITY Print Color First Page If you wish to darken the selected color, touch the key. If FOR YOUR INFO.
Page 175: [Image Edit] Key
COPIER [Image Edit] KEY When the [Image Edit] key is touched in the 1st special modes menu screen, the image edit menu screen opens. Image edit menu screen Special Modes Special Modes Image Edit Margin Shift Erase Pamphlet Copy Mirror Transparency Multi Shot Photo Repeat...
Page 176: Repeating Photos On A Copy (Photo Repeat)
COPIER REPEATING PHOTOS ON A COPY (Photo Repeat) Photo Repeat is used to create repeated images of a photo-size original (3" x 5" size, 5" x 7" size, 2-1/2" x 4" size, 2-1/2" x 2-1/2" size or 2-1/8" x 3-5/8" size (130 mm x 90 mm size, 100 mm x 150 mm size, 70 mm x 100 mm size, 65 mm x 70 mm size or 57 mm x 100 mm size)) on a single sheet of copy paper as shown below.
Page 177 COPIER Select Photo Repeat settings. (1) Touch the key showing the original type Image Edit and paper size combination that you want Cancel Photo Repeat to use. Repeat Type Original Size Touch the keys to switch through the screens and touch the desired repeat type key.
Page 178: Reversing The Image (Mirror Image)
COPIER REVERSING THE IMAGE (Mirror Image) This feature is used to make a copy that is a mirror image of the original. Original Mirror image copy Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes.
Page 179: Copying In The Center Of The Paper (Centering)
COPIER COPYING IN THE CENTER OF THE PAPER (Centering) This is used to center the copied image on the paper. This lets you place the image in the center of the paper when the original size is smaller than the paper size or when the image is reduced.
Page 180 COPIER • The image can be reduced when using the centering function, but not enlarged. • When the original size or the paper size is displayed as a special size, this function cannot be used. To cancel centering... Touch the [Centering] key in the screen of step 3 so that it is not highlighted. 2-84 Contents...
Page 181: Reversing White And Black In Acopy (B/W Reverse)
COPIER REVERSING WHITE AND BLACK IN A COPY (B/W Reverse) This is used to reverse black and white in a copy to create a negative image. This function can only be used for black and white copying. Originals with large black areas (which use a large amount of toner) can be copied using Black/White Reverse to reduce toner consumption.
Page 182 COPIER When this function is selected, the "Original Image Type" setting for exposure adjustment automatically changes to "Text". To cancel B/W reverse... Touch the [B/W Reverse] key in the screen of step 3 so that it is not highlighted. 2-86 Contents...
Page 183: [Color Adjustments] Key
COPIER [Color Adjustments] KEY When the [Color Adjustments] key is touched in the 1st special modes menu screen, the color adjustments menu screen opens. Color adjustments menu screen Special Modes Special Modes Color Adjustments Margin Shift Erase Pamphlet Copy Suppress RGB Adjust Transparency Sharpness...
Page 184: Adjusting Red/Green/Blue In Copies (Rgb Adjust)
COPIER ADJUSTING RED/GREEN/BLUE IN COPIES (RGB Adjust) This feature is used to strengthen or weaken any one of the three color components R (red), G (green), or B (blue). R(Red)+ G(Green)+ B(Blue)+ Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes.
Page 185: Adjusting The Sharpness Of An Image (Sharpness)
(3) Touch the [Sharpness] key. ☞ [Color Adjustments] KEY (page 2-87) Adjust the image. (1) Touch the [Soft] key or the [Sharp] key. Color Adjustments (2) Touch the [OK] key. Cancel Sharpness You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode.
Page 186: Whitening Faint Colors In Copies (Suppress Background)
COPIER WHITENING FAINT COLORS IN COPIES (Suppress Background) This feature is used to suppress light background areas. Level [+] The lightness level at which suppression takes place can be adjusted. Light areas are suppressed. Level [-] Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes.
Page 187 COPIER To cancel a suppress background setting... Touch the [Cancel] key in the screen of step 3. 2-91 Contents...
Page 188: Adjusting The Color (Color Balance)
COPIER ADJUSTING THE COLOR (Color Balance) The color, tone, and density of color copies can be adjusted. Each of the colors yellow, cyan, magenta, and black are Light Dark divided into 8 gradations from light to dark, and the average density of each gradation can be adjusted, or all eight gradations can be adjusted at once.
Page 189: Adjust The Color Balance
COPIER Adjust the color balance. (2), (3) (1) Select the color to be adjusted. Color Adjustments Select [Y] (yellow), [M] (magenta), [C] (cyan), or [Bk] (black). Cancel Color Balance If only the rectangular area around the letter in a key is highlighted, the settings have been changed from the factory default settings.
Page 190: Adjusting The Brightness Of Acopy (Brightness)
COPIER ADJUSTING THE BRIGHTNESS OF A COPY (Brightness) The brightness of color images can be adjusted. Darker Original Brighter Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes. (1) Touch the [Special Modes] key.
Page 191: Adjusting The Intensity Of A Copy (Intensity)
COPIER ADJUSTING THE INTENSITY OF A COPY (Intensity) This is used to adjust the intensity (saturation) of color images. Weakening the Original Strengthening intensity the intensity Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes.
Page 192: Checking Copies Before Printing (Proof Copy)
COPIER CHECKING COPIES BEFORE PRINTING (Proof Copy) This feature prints only one set of copies, regardless of how many sets have been specified. After the first set is checked for errors, the remaining sets can be printed. Previously it was necessary to re-scan the original each time changes to settings were required.
Page 193 COPIER Set the number of copies (number of sets) with the numeric keys. If you will copy multiple originals using the document glass, Special Modes switch to sort mode after this step. ☞ Sort mode (page 2-33) 2-Sided Copy Plain 8½x11 Up to 999 copies (sets) can be set.
Page 194 COPIER Change the settings. (1) Touch the key of the setting that you want Proof Copy to change. The setting screen of the touched key opens. Change the settings and touch the [OK] key. (2) Touch the [OK] key. Color Mode Paper Select 2-Sided Copy Output...
Page 195: Checking The Number Of Scanned Original Sheets Before Copying (Original Count)
COPIER CHECKING THE NUMBER OF SCANNED ORIGINAL SHEETS BEFORE COPYING (Original Count) The number of scanned original sheets can be counted and displayed before copying is executed. By allowing you to check the number of original sheets that were scanned, this helps reduce the occurrence of copy mistakes. Insert the originals face up in the document feeder tray.
Page 196 COPIER After scanning is finished, check the number of sheets that were scanned and 130 pages of original have been scanned. touch the [OK] key. Copy the scanned data? Copying will begin. • When job build mode is used, the number of scanned sheets Cancel appears when the [Read-End] key is touched.
Page 197: Copying Originals Of Different Sizes (Mixed Size Original)
COPIER COPYING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original) Even when 5-1/2" x 8-1/2" (A5) originals are mixed in with 8-1/2" x 11" (A4) originals, all originals can be copied at once. When mixed size original is combined with auto ratio selection, the ratio is adjusted individually for each original according to the selected paper size, enabling output on a uniform paper size.
Page 198 COPIER Select the special modes. (1) Touch the [Special Modes] key. 特別機能ＯＫ ☞ Special Modes SPECIAL MODES (page 2-37) (2) Touch the keys to switch through the ファイリング自動一時保存お試しコピー File Quick File Proof Copy screens.
Page 199: Convenient Copy Functions
COPIER CONVENIENT COPY FUNCTIONS This section explains convenient copy functions such as interrupting a copy run, changing the order of reserved copy jobs, and storing copy settings in a program. INTERRUPTING A COPY RUN (Interrupt copy) When you need to make an urgent copy and the machine is busy with a long copy run or other job, use interrupt copy. Interrupt copy temporarily stops the job in progress and lets you perform the interrupt copy job first.
Page 200 COPIER • If user authentication is enabled, the login screen will appear when the [Interrupt] key is pressed. Enter your user name and password to log in. The number of copies made will be added to the count of the user that logged in. •...
Page 201: Checking A Preview Image Of A Copy (Preview)
COPIER CHECKING A PREVIEW IMAGE OF A COPY (Preview) You can touch the [Preview] key so that it is highlighted in the base screen and then scan the original to check a preview image of the copy in the touch panel before printing the copy. Place the original.
Page 202: Preview Screen
COPIER PREVIEW SCREEN The preview screen is explained below. Reset Preview Color Display Output Function Rev. Display Rotation Start Copy 0001 /0010 Preview image Preview/Reset Cancel Preview Again A preview image of the scanned original is displayed. If the image is cut off, use the scroll bars at the right and bottom of the screen to scroll the image.
Page 203: Job Status Screen
COPIER JOB STATUS SCREEN The job status screen is displayed when the [JOB STATUS] key on the operation panel is pressed. The job status screen shows the status of jobs by mode. When the [JOB STATUS] key is pressed, the job status screen of the mode that was being used before the key was pressed appears.
Page 204: Job Queue Screen And Completed Job Screen
COPIER JOB QUEUE SCREEN AND COMPLETED JOB SCREEN The job status screen consists of the job queue screen that shows copy and print jobs waiting to be printed and the job currently in progress, the completed job screen that shows jobs that have been completed, and the spool screen that shows print jobs that have been spooled and encrypted PDF jobs that are waiting for a password to be entered.
Page 205 COPIER Job key display Each job key shows the position of the job in the job queue and the current status of the job. Copy 002/000 Waiting Indicates the number (position) of the job in the job Status queue. Shows the job status. When the job currently being printed is finished, the job Message Status...
Page 206: Canceling A Job That Is Waiting In The Queue
COPIER CANCELING A JOB THAT IS WAITING IN THE QUEUE A copy job that is waiting to be printed can be canceled. Press the [JOB STATUS] key ( Cancel the job. (1) Touch the [Print Job] tab. Print Job Scan to Fax Job Internet Fax Job Queue...
Page 207: Giving Priority To A Job In The Queue
COPIER GIVING PRIORITY TO A JOB IN THE QUEUE If a copy job is begun when there are already multiple jobs in the queue, the copy job will appear at the end of the queue. However, if you have an urgent copy job, you can give priority to the job and have it executed first. Press the [JOB STATUS] key ( Give the desired job priority.
Page 208: Checking Information On A Copy Job Waiting In The Queue
COPIER CHECKING INFORMATION ON A COPY JOB WAITING IN THE QUEUE Detailed information can be displayed on a copy job waiting in the queue. Press the [JOB STATUS] key ( Checking job details (1) Touch the [Print Job] tab. Print Job Scan to Fax Job Internet Fax...
Page 209: Storing Copy Operations (Job Programs)
COPIER STORING COPY OPERATIONS (Job Programs) A job program is a group of copy settings stored together. When copy settings are stored in a job program, the settings can be retrieved and used for a copy job by means of a simple operation. For example, suppose 8-1/2"...
Page 210: Storing (Editing/Deleting) A Job Program
COPIER STORING (EDITING/DELETING) A JOB PROGRAM The procedures for storing copy settings in a job program and deleting a job program are explained below. Press the [#] key. Touch the [Store/Delete] tab. Exit Job Programs Press program number. Recall Store/Delete Touch a numeric key.
Page 211 COPIER Select the copy settings that you wish to To store, make selections and press Cancel [OK], to delete, press [Cancel]. store in the job program and touch the Color Mode Special Modes Full Color [OK] key. 2-Sided Copy To assign a name to the program, touch the [Program Name] Plain Output 8½x11...
Page 212 CHAPTER 3 PRINTER This chapter provides detailed explanations of the procedures for using the printer function. PRINTER FUNCTION OF THE MACHINE ..3-3 CONVENIENT PRINTING FUNCTIONS PRINTING FROM WINDOWS CONVENIENT FUNCTIONS FOR CREATING PAMPHLETS AND POSTERS .
Page 213 PRINTER PRINT FUNCTIONS FOR SPECIAL CHECKING THE PRINT STATUS PURPOSES ......3-49 JOB STATUS SCREEN .
Page 214: Printer Function Of The Machine
PRINTER PRINTER FUNCTION OF THE MACHINE The machine is equipped standard with a full color printing function. To enable printing from your computer, a printer driver must be installed. See the table below to determine which printer driver to use in your environment. Environment Printer driver type PCL6...
Page 215: Printing From Windows
PRINTER PRINTING FROM WINDOWS BASIC PRINTING PROCEDURE The following example explains how to print a document from "WordPad", which is a standard accessory program in Windows. Click the [Word Pad] menu ( The menu used to execute printing may vary depending on the software application. Open the printer driver properties window.
Page 216 PRINTER Select print settings. (1) Click the [Paper] tab. (2) Select the paper size. To select settings on other tabs, click the desired tab and then select the settings. (3) Click the [OK] button. • Make sure the paper size is the same as the paper size set in the software application. •...
Page 217: Selecting The Paper
PRINTER SELECTING THE PAPER This section explains how to configure the "Paper Selection" setting on the [Paper] tab of the printer driver properties window. Before printing, check the paper sizes, paper types, and paper remaining in the machine's trays. To view the most recent tray information, click the [Tray Status] button. •...
Page 218: Printing On Envelopes
PRINTER PRINTING ON ENVELOPES The bypass tray can be used to print on special media such as envelopes. The procedure for printing on an envelope from the printer driver properties screen is described below. For the types of paper that can be used in the bypass tray, see "IMPORTANT POINTS ABOUT PAPER"...
Page 219: Printing When The User Authentication Function Is Enabled
PRINTER PRINTING WHEN THE USER AUTHENTICATION FUNCTION IS ENABLED When the user authentication function is enabled in the machine's system settings (administrator), your user information (login name, password, etc.) must be entered in the printer driver properties window before you can print. The information that must be entered varies depending on the authentication method being used, so check with the administrator of the machine before printing.
Page 220: Start Printing
PRINTER Enter your login name and password. (1) Click the [Job Handling] tab. (2) Enter your user information. • When authentication is by login name/password Select the [Login Name] and [Password] checkboxes so that checkmarks appear, and enter your login name and password. Enter 1 to 32 characters for the password.
Page 221 PRINTER • When user authentication is enabled in the system settings (administrator), printing is possible without entering user information if black and white printing is set in the printer driver. For black and white print settings, see "BLACK AND WHITE PRINTING"...
Page 222: Viewing Printer Driver Help
PRINTER VIEWING PRINTER DRIVER HELP When selecting settings in the printer driver, you can display Help to view explanations of the settings. Open the printer driver properties window from the print window of the software application. (1) Select the printer driver of the machine. (2) Click the [Preferences] button.
Page 223: Saving Frequently Used Print Settings
PRINTER SAVING FREQUENTLY USED PRINT SETTINGS Settings configured on each of the tabs at the time of printing can be saved as user settings. Saving frequently used settings or complex color settings under an assigned name makes it easy to select those settings the next time you need to use them.
Page 224 PRINTER Check and save the settings. (1) Check the displayed settings. (2) Enter a name for the settings (maximum of 20 characters). (3) Click the [OK] button. Click the [OK] button. Start printing. • Up to 30 sets of user settings can be saved. •...
Page 225: Using Saved Settings
PRINTER USING SAVED SETTINGS Open the printer driver properties window from the print window of the software application. (1) Select the printer driver of the machine. (2) Click the [Preferences] button. The button that is used to open the printer driver properties window (usually [Properties] or [Printing Preferences]) may vary depending on the software application.
Page 226: Changing The Printer Driver Default Settings
PRINTER CHANGING THE PRINTER DRIVER DEFAULT SETTINGS The default settings of the printer driver can be changed using the procedure below. The settings selected using this procedure are saved and become the default settings when printing from a software application. (Settings selected in the printer driver properties window when printing from an application remain in effect only while the application is in use.) Click the [Start] button (...
Page 227 PRINTER Click the [Printing Preferences] button on the [General] tab. Configure the settings and click the [OK] button. For explanations of the settings, see printer driver Help. 3-16 Contents...
Page 228: Printing From A Macintosh
PRINTER PRINTING FROM A MACINTOSH BASIC PRINTING PROCEDURE The following example explains how to print a document from the standard accessory program "TextEdit" in Mac OS X. To install the PPD file and configure printer driver settings, see "3. SETUP IN A MACINTOSH ENVIRONMENT" in the Software Setup Guide.
Page 229: Printing
PRINTER PRINTING Select [Print] from the [File] menu of TextEdit. The menu used to execute printing may vary depending on the software application. Make sure that the correct printer is selected. The machine name that appears in the "Printer" menu is normally [SCxxxxxx]. ("xxxxxx" is a sequence of characters that varies depending on the machine model.) Select print settings.
Page 230 PRINTER Click the [Print] button. Printing begins. 3-19 Contents...
Page 231: Selecting The Paper
PRINTER SELECTING THE PAPER This section explains the [Paper Feed] settings in the print settings window. • When [Auto Select] is selected A tray with plain paper or recycled paper (the factory default setting is plain paper only) of the size specified in "Paper Size"...
Page 232: Printing On Envelopes
PRINTER PRINTING ON ENVELOPES The bypass tray can be used to print on special media such as envelopes. The procedure for printing on an envelope from the printer driver properties screen is described below. For the types of paper that can be used in the bypass tray, see "IMPORTANT POINTS ABOUT PAPER"...
Page 233: Printing When The User Authentication Function Is Enabled
PRINTER PRINTING WHEN THE USER AUTHENTICATION FUNCTION IS ENABLED When the user authentication function is enabled in the machine's system settings (administrator), you must enter your user information (login name, password, etc.) in order to print. The information that must be entered varies depending on the authentication method being used, so check with the administrator of the machine before printing.
Page 234 PRINTER Start printing. (1) Enter your user information. • When authentication is by login name/password Enter your login name in "Login Name" and your password in "Password" (1 to 32 characters). • When authentication is by user number Enter your user number (5 to 8 digits) in "User Number".
Page 235: Frequently Used Functions
PRINTER FREQUENTLY USED FUNCTIONS This section explains frequently used functions. • SELECTING THE COLOR MODE • PRINTING MULTIPLE PAGES ON ONE PAGE • TWO-SIDED PRINTING (page 3-27) (page 3-30) • FITTING THE PRINT IMAGE TO THE PAPER (page 3-29) The explanations assume that the paper size and other basic settings have already been selected. For the basic procedure for printing and the steps for opening the printer driver properties window, see the following section: ☞...
Page 236: Black And White Printing
PRINTER BLACK AND WHITE PRINTING [Black and White] can be selected on the [Main] tab as well as on the [Color] tab. Click the [Black and White Print] checkbox on the [Main] tab so that a checkmark appears. The [Black and White Print] checkbox on the [Main] tab and the "Color Mode" setting on the [Color] tab are linked. When the [Black and White Print] checkbox is selected on the [Main] tab, [Black and White] is also selected on the [Color] tab.
Page 237: Selecting A Print Mode Setting
PRINTER SELECTING A PRINT MODE SETTING This section explains the procedure for selecting a print mode setting. The "Print Mode Settings" consist of the following two items: Normal: This mode is suitable for printing data such as regular text or a table. High Quality: The print quality of color photos and text is high.
Page 238: Two-Sided Printing
PRINTER TWO-SIDED PRINTING The machine can print on both sides of the paper. This function is useful for many purposes, and is particularly convenient when you want to create a simple pamphlet. Two-sided printing also helps conserve paper. Paper Print results orientation Windows Macintosh...
Page 239 PRINTER Macintosh (1) Select [Layout]. (2) Select [Long-edged binding] or [Short-edged binding]. 3-28 Contents...
Page 240: Fitting The Print Image To The Paper
PRINTER FITTING THE PRINT IMAGE TO THE PAPER This function is used to automatically enlarge or reduce the printed image to match the size of the paper loaded in the machine. This is convenient for such purposes as enlarging a invoice or A5 size document to letter or A4 size to make it easier to view, and to print when the same size of paper as the document image is not loaded in the machine.
Page 241: Printing Multiple Pages On One Page
PRINTER PRINTING MULTIPLE PAGES ON ONE PAGE This function can be used to reduce the print image and print multiple pages on a single sheet of paper. This is convenient when you want to print multiple images such as photos on a single sheet of paper, and when you want to conserve paper.
Page 242 PRINTER Windows (1) Configure the settings on the [Main] tab. (2) Select the number of pages per sheet. (3) If you wish to print borderlines, click the [Border] checkbox so that a checkmark appears. (4) Select the order of the pages. (2) (3) Normal printing only on the first page (PCL6 only) (1) Click the [Special Modes] tab.
Page 243 PRINTER Macintosh (1) Select [Layout]. (2) Select the number of pages per sheet. (3) Select the order of the pages. (4) If you wish to print borderlines, select the desired type of borderline. 3-32 Contents...
Page 244: Convenient Printing Functions
PRINTER CONVENIENT PRINTING FUNCTIONS This section explains convenient functions for specific printing objectives. • CONVENIENT FUNCTIONS FOR CREATING • FUNCTIONS THAT COMBINE TEXT AND IMAGES PAMPHLETS AND POSTERS (page 3-46) • FUNCTIONS TO ADJUST THE SIZE AND • PRINT FUNCTIONS FOR SPECIAL PURPOSES ORIENTATION OF THE IMAGE (page 3-37) (page 3-49)
Page 245 PRINTER Macintosh (1) Select [Printer Features]. (2) Select the "Binding Edge". (3) Select [Tiled Pamphlet] or [2-Up Pamphlet]. 3-34 Contents...
Page 246: Increasing The Margin (Margin Shift)
PRINTER INCREASING THE MARGIN (Margin Shift) This function is used to shift the print image to increase the margin at the left, right, or top of the paper. This is convenient when you wish to staple or punch the output but the binding area overlaps the text.
Page 247: Creating A Large Poster (Poster Printing)
PRINTER CREATING A LARGE POSTER (Poster Printing) (This function is only available in Windows.) One page of print data can be enlarged and printed using multiple sheets of paper (4 sheets (2 x 2), 9 sheets (3 x 3) or 16 sheets (4 x 4)). The sheets can then be attached together to create a large poster.
Page 248: Functions To Adjust The Size And Orientation Of The Image
PRINTER FUNCTIONS TO ADJUST THE SIZE AND ORIENTATION OF THE IMAGE ROTATING THE PRINT IMAGE 180 DEGREES (Rotate 180 degrees) This feature rotates the image 180 degrees so that it can be printed correctly on paper that can only be loaded in one orientation (such as envelopes or paper with punch ABCD holes).
Page 249: Enlarging/Reducing The Print Image (Zoom/Xy-Zoom)
PRINTER ENLARGING/REDUCING THE PRINT IMAGE (Zoom/XY-Zoom) This function is used to enlarge or reduce the image to a selected percentage. This allows you to enlarge a small image or add margins to the paper by slightly reducing an image. When using the PS printer driver (Windows), you can set the width and length percentages separately to change the proportions of the image.
Page 250: Adjusting Line Widths When Printing (Line Width Settings)
PRINTER ADJUSTING LINE WIDTHS WHEN PRINTING (Line Width Settings) (This function is only available in Windows.) When lines in special applications such as CAD cannot be printed correctly, this setting can be used to adjust line widths, such as making overall line widths wider. (This setting is only effective for vector data;...
Page 251: Reversing The Image (Mirror Image)
PRINTER REVERSING THE IMAGE (Mirror Image) The image can be reversed to create a mirror image. This function can be used to conveniently print a design for a woodblock print or other printing medium. Windows (This function can be used when the PS printer driver is used.) (1) Click the [Advanced] tab.
Page 252 PRINTER PRINTING WHILE SKIPPING BLANK PAGES (This function is only available in Windows.) If the scanned original contains blank pages, the blank pages are skipped during printing. The machine detects blank pages and does not print them. This eliminates unnecessary printing without you having to check for blank pages before printing.
Page 253: Color Mode Adjustment Function
PRINTER COLOR MODE ADJUSTMENT FUNCTION ADJUSTING THE BRIGHTNESS AND CONTRAST OF THE IMAGE (Color Adjustment) The brightness and contrast can be adjusted in the print settings when printing a photo or other image. These settings can be used for simple corrections when you do not have image editing software installed on your computer. Windows (1) Click the [Color] tab.
Page 254: Printing Faint Text And Lines In Black (Text To Black/Vector To Black)
PRINTER PRINTING FAINT TEXT AND LINES IN BLACK (Text To Black/Vector To Black) (This function is only available in Windows.) When printing a color image in grayscale, color text and ABCD ABCD lines that are faint can be printed in black. (Raster data such as bitmap images cannot be adjusted.) This allows you to bring out color text and lines that are faint and difficult to see when printed in grayscale.
Page 255: Selecting Color Settings To Match The Image Type (Advanced Color)
PRINTER SELECTING COLOR SETTINGS TO MATCH THE IMAGE TYPE (Advanced Color) Preset color settings are available in the machine's printer driver for various uses. These enable printing using the most suitable color settings for the color image type. Advanced color settings can also be configured to match the objective of the color image, such as color management settings and the screening setting for adjustment of color tone expression.
Page 256 PRINTER Macintosh (1) Select [Color]. (2) Select color print settings. To use the Mac OS Color Management function, select the [ColorSync] checkbox . When this is done, "Image Type" cannot be selected. (3) Select the color image type. An image type to match the data to be printed can be selected from the pull-down menu.
Page 257: Functions That Combine Text And Images
PRINTER FUNCTIONS THAT COMBINE TEXT AND IMAGES ADDING A WATERMARK TO PRINTED PAGES (Watermark) Faint shadow-like text can be added to the background of the printed image as a watermark. The size, color, density, and angle of the watermark text can be adjusted.
Page 258: Printing An Image Over The Print Data (Image Stamp)
PRINTER PRINTING AN IMAGE OVER THE PRINT DATA (Image Stamp) (This function is only available in Windows.) A bitmap or JPEG image stored on your computer can be printed over the print data. The size, position, and angle of the image can be adjusted. This feature can be used to "stamp"...
Page 259: Creating Overlays For Print Data (Overlays)
PRINTER CREATING OVERLAYS FOR PRINT DATA (Overlays) (This function is only available in Windows.) The print data can be printed in a previously created XXXX XXXX overlay. By creating table rulings or a decorative frame in an application different from that of the text file and 1 100 1 100 XXXX...
Page 260: Print Functions For Special Purposes
PRINTER PRINT FUNCTIONS FOR SPECIAL PURPOSES PRINTING SPECIFIED PAGES ON DIFFERENT PAPER (Different Paper) • Using this function in a Windows environment The front and back cover and specified pages of a document can be printed on paper that is different from the other pages.
Page 261 PRINTER Macintosh (1) Select [Printer Features]. (2) Select [Different Paper]. SCxxxxxx (3) Select cover insertion settings. Select the print setting, paper tray, and paper type for the cover page and last page. 3-50 Contents...
Page 262: Adding Inserts When Printing On Transparency Film (Transparency Inserts)
PRINTER ADDING INSERTS WHEN PRINTING ON TRANSPARENCY FILM (Transparency Inserts) When printing on transparency film, this function helps prevent the sheets of transparency film from sticking together by inserting a sheet of paper between each sheet of film. It is also possible to print the same content on each inserted sheet of paper as is printed on the corresponding sheet of transparency film.
Page 263: Printing A Carbon Copy (Carbon Copy)
PRINTER PRINTING A CARBON COPY (Carbon Copy) (This function is only available in Windows.) This function is used to print an additional copy of the print image on paper that is the same size but from a different paper tray. For example, if carbon copy print is selected when standard paper is loaded in tray 1 and colored paper is loaded in tray 2, a print result similar to a carbon copy...
Page 264: Two-Sided Printing With Specific Pages Printed On The Front Side (Chapter Inserts)
PRINTER TWO-SIDED PRINTING WITH SPECIFIC PAGES PRINTED ON THE FRONT SIDE (Chapter Inserts) (This function is only available in Windows.) You can have specific pages printed on the front side of Example: the paper. When pages 4 and 8 are specified as page settings. When a page (such as the first page of a chapter) is specified as a front side page, the page will be printed on the front side of the paper even if would normally be...
Page 265: Convenient Printer Functions
PRINTER CONVENIENT PRINTER FUNCTIONS SAVING AND USING PRINT FILES (Retention/Document Filing) This function is used to store a print job as a file on the machine's hard drive, allowing the job to be printed from the operation panel when needed. The location for storing a file can be selected to prevent the file from being mixed together with files of other users.
Page 266 PRINTER Windows (1) Click the [Job Handling] tab. (2) Select the retention setting. Click the [Retention] checkbox . Select the retention method in "Retention Settings". To enter a password (5 to 8 digit number), click the [Password] checkbox (3) Select document filing settings. Select the folder for storing the file in "Document Filing Settings".
Page 267: Automatically Print All Stored Data
PRINTER Macintosh (1) Select [Job Handling]. (2) Select the retention setting. Click the [Retention] checkbox . Select the retention method in "Retention Settings". To simplify operation the next time the same password is set, click the (lock) button after entering the password (5 to 8 digit number). (3) Select document filing settings.
Page 268: Printing Without The Printer Driver
PRINTER PRINTING WITHOUT THE PRINTER DRIVER When you do not have the printer driver installed on your computer, or when the software application used to open a file that you wish to print is not available, you can print directly to the machine without using the printer driver. The file types (and corresponding extensions) that can be printed directly are shown below.
Page 269: Directly Printing A File On An Ftp Server
PRINTER DIRECTLY PRINTING A FILE ON AN FTP SERVER When an FTP server is configured in the machine's Web pages, you can specify and print a file on the FTP server from the operation panel of the machine. This saves you the trouble of downloading the file and printing it from a computer. For the procedure for accessing the Web pages, see the Quick Start Guide.
Page 270: Directly Printing A File In Usb Memory
PRINTER Print the selected file. Cancel Print File-01.tiff (1) Select print conditions. If you selected a file (PCL, PS, or XPS) in step 3 that Paper Select Number of Prints includes print settings, the settings will be applied. Auto B/W Print (1 999) (2) Touch the [Print] key.
Page 271: Print The Selected File
PRINTER Access the USB memory device. (1) Touch the [DOCUMENT FILING] key. DOCUMENT COPY IMAGE SEND FILING (2) Touch the [Ex Data Access] tab. Scan to HDD HDD Status File Retrieve Ex Data Access (3) Touch the [USB Memory] key. External Data Access USB Memory Network Folder...
Page 272: Directly Printing A File In Anetwork Folder
PRINTER Remove the USB memory device from the machine. When you select a PDF file that has a password, you must enter the password in the job status screen to begin printing. ☞ PRINTING AN ENCRYPTED PDF FILE (page 3-69) DIRECTLY PRINTING A FILE IN A NETWORK FOLDER You can use the machine's operation panel to select and print a file on a server or in a shared folder of an individual's computer on the same network as the machine.
Page 273 PRINTER Access the network folder. Select workgroup. Search (1) Touch the key of the workgroup that you Workgroup wish to access. Workgroup Name Work 1 Work 2 Work 3 Work 4 Work 5 Work 6 (2) Touch the key of the server or computer Select server.
Page 274 PRINTER Touch the key of the file that you wish to \\Server 1\User 1 print. File or Folder Name File-01.tiff • The icon appears to the left of keys of files that can be Folder01 printed. File-02.tiff • The icon is displayed to the left of keys of folders in the File-03.tiff network folder.
Page 275: Directly Printing From A Computer
PRINTER DIRECTLY PRINTING FROM A COMPUTER Settings can be configured in the Web pages of the machine to enable direct printing from a computer without using the printer driver. For the procedure for accessing the Web pages, see the Quick Start Guide. SUBMIT PRINT JOB You can specify a file to be printed directly without using the printer driver.
Page 276: E-Mail Print
PRINTER E-MAIL PRINT An e-mail account can be configured in the machine to have the machine periodically check your mail server and automatically print received e-mail attachments without using the printer driver. • Configuring settings To use E-mail Print, you must first configure an e-mail account in the machine. To configure an account, click [Application Settings] and then [E-mail Print Settings] in the Web page menu.
Page 277: Checking The Print Status
PRINTER CHECKING THE PRINT STATUS JOB STATUS SCREEN The job status screen is displayed when the [JOB STATUS] key on the operation panel is pressed. The job status screen shows the status of jobs by mode. When the [JOB STATUS] key is pressed, the job status screen of the mode that was being used before the key was pressed appears.
Page 278: Spool Screen/Job Queue Screen/Completed Job Screen
PRINTER SPOOL SCREEN/JOB QUEUE SCREEN/COMPLETED JOB SCREEN The job status screen consists of the job queue screen that shows copy and print jobs waiting to be printed and the job currently in progress, the completed job screen that shows jobs that have been completed, and the spool screen that shows print jobs that have been spooled and encrypted PDF jobs that are waiting for a password to be entered.
Page 279 PRINTER Job key display Each job key shows the position of the job in the job queue and the current status of the job. Computer01 002/000 Waiting Indicates the number (position) of the job in the job Status queue. Shows the job status. When the job currently being printed is finished, the job Message Status...
Page 280: Printing An Encrypted Pdf File
PRINTER PRINTING AN ENCRYPTED PDF FILE Encrypted PDF is used to protect a PDF file by requiring the entry of a password to print or edit the file. To directly print an encrypted PDF file on an FTP server or in a USB memory device, etc. connected to the machine, follow the steps below to enter the password and begin printing.
Page 281: Giving A Print Job Priority/Canceling A Print Job
PRINTER GIVING A PRINT JOB PRIORITY/CANCELING A PRINT JOB GIVING A PRINT JOB PRIORITY When the machine is busy copying or printing a received fax or other job, you can give priority to a print job that is waiting to be printed and print it ahead of the other jobs. Touch the [JOB STATUS] key ( Give the desired job priority.
Page 282: Canceling A Print Job
PRINTER CANCELING A PRINT JOB A job being printed, a job waiting to be printed, or a spooled job can be canceled. Press the [JOB STATUS] key ( Cancel the job. (1) Touch the [Print Job] tab. Print Job Scan to Fax Job Internet Fax Job Queue...
Page 283: Changing To Another Paper Size And Printing When Paper Runs Out
PRINTER CHANGING TO ANOTHER PAPER SIZE AND PRINTING WHEN PAPER RUNS OUT If printing stops because the machine ran out of paper, or if the size of paper specified in the printer driver is not loaded in the machine, a message will appear in the touch panel. Printing will begin automatically when the [OK] key is touched and paper is loaded in the machine.
Page 284: Appendix
PRINTER APPENDIX PRINTER DRIVER SPECIFICATION LIST Available functions and output results may vary depending on the type of printer driver being used. Macintosh Function PCL6 Windows PPD Frequently used Copies 1-999 1-999 1-999 1-999 functions Orientation N-Up Number of 2,4,6,8,9,16 2,4,6,8,9,16 2,4,6,9,16 2,4,6,9,16...
Page 285 PRINTER Macintosh Function PCL6 Windows PPD Special functions Different Paper Transparency Inserts Carbon Copy Chapter Inserts Page Interleave Layout Print Retention Document Filing Color mode Color Adjustment adjusting function Text To Black/ Vector To Black Advanced Color Functions to Watermark combine text and Image Stamp images...
Page 286 CHAPTER 4 FACSIMILE This chapter provides detailed explanations of the procedures for using the fax function. BASIC TRANSMISSION METHODS BEFORE USING THE MACHINE AS A FAX TRANSMISSION METHODS ....4-25 PREPARATIONS FOR FAX .
Page 287 FACSIMILE SENDING A FAX WHEN ANOTHER FAX RECEPTION MACHINE POLLS YOUR MACHINE (Polling Memory) ....... . . 4-93 RECEIVING FAXES .
Page 288 FACSIMILE USING AN EXTENSION PHONE CONNECTING AND USING AN EXISTING PHONE (Extension Phone Connection) ..4-114 • RECEIVING A FAX AFTER ANSWERING A CALL ON THE EXTENSION PHONE (Remote Reception) ....4-115 •...
Page 289: Before Using The Machine As Afax
FACSIMILE BEFORE USING THE MACHINE AS A This section provides information that you should know before using the machine as a fax machine. PREPARATIONS FOR FAX To use the machine as a fax, the telephone line must be connected and the type of line set. CONNECTION TO THE TELEPHONE LINE Be sure to use the provided telephone line cord to connect the machine to the wall telephone jack.
Page 290: Setting The Telephone Line Type
FACSIMILE SETTING THE TELEPHONE LINE TYPE The machine's dial mode setting must be set to the type of telephone line you are using. If the setting is not correct, dialing will not be possible. Touch the [Auto Select] key in "Dial Mode Setting" in the system settings (administrator). The machine will automatically set the dial mode to the type of line you are using.
Page 291: Checking The Date And Time
FACSIMILE CHECKING THE DATE AND TIME Verify that the correct date and time are set in the machine. The date and time are set in the system settings of the machine. When the [SYSTEM SETTINGS] key is pressed, the system settings menu screen appears on the touch panel. Select [Default Settings], [Clock], and [Clock Adjust], and set the year, month, day, hour, and minute.
Page 292: Base Screen Of Fax Mode
FACSIMILE BASE SCREEN OF FAX MODE To use the fax function, select settings and operations in the base screen of fax mode. To display the base screen of fax mode, touch the [IMAGE SEND] key and then touch the [Fax] tab. DOCUMENT COPY IMAGE SEND...
Page 293 FACSIMILE BASE SCREEN OF FAX MODE This screen is used to select settings and operations in fax mode. DOCUMENT IMAGE SEND COPY FILING Ready to send. (10) Speaker Resend Scan Internet Fax USB Mem. Scan PC Scan Address Book Scan: Send: Original Auto...
Page 294 FACSIMILE (15) (16) This shows the currently selected fax reception mode and the amount of free memory remaining. When "Hold Setting for Received Data Print" or ☞ "Received Data Image Check Setting" is enabled in the RECEIVING FAXES (page 4-56) system settings (administrator), this will appear when a fax is received.
Page 295: Address Book Screen
FACSIMILE ADDRESS BOOK SCREEN This screen is used to select a destination from the list of stored destinations. (10) (11) CCC CCC 0123456789 Condition (12) Settings AAA AAA BBB BBB Address Review CCC CCC DDD DDD Address Entry EEE EEE FFF FFF Global GGG GGG...
Page 296: Changing The Display Of One-Touch Keys In The Address Book Screen
FACSIMILE When using the network scanner function or the Internet fax function, a different icon will appear in the one-touch key display if a non-fax destination (address) is stored. ☞ RETRIEVING A FAX NUMBER FROM THE ADDRESS BOOK (page 4-17) •...
Page 297 FACSIMILE Index display Indexes make it easy to search for a destination (one-touch key). The destinations are displayed separately using alphabetical search characters and index numbers. To display a stored destination, touch the appropriate index tab. It is convenient to store frequently used destinations in the [Freq.] index. Specify that a destination be displayed in the [Freq.] index when you store the destination.
Page 298: Fax Transmission Sequence
FACSIMILE FAX TRANSMISSION SEQUENCE This section explains the basic procedure for sending a fax. Place the original. Place the original in the document feeder tray of the automatic document feeder, or on the document glass. Enter the destination fax number •...
Page 299 FACSIMILE Select image settings. Select settings for the original to be faxed. Scan Internet Fax USB Mem. Scan PC Scan • [Original] key: Use this key to select the original size, the Address Book Original Scan: Auto 8½x11 Send: Auto original send size, and 2-sided original scanning.
Page 300: Begin Transmission
FACSIMILE Begin transmission Scan the original and send the fax. If the original is placed on the document glass, follow these steps to start scanning and transmission: When sending a fax normally (memory transmission) (1) Press the [BLACK & WHITE START] key. (2) When scanning is finished, replace the original with the next original.
Page 301: Entering Destinations
FACSIMILE ENTERING DESTINATIONS This section explains how to enter destination fax numbers. Destination fax numbers can be entered using the numeric keys, or by retrieving a previously stored fax number using the address book or a search number. ENTERING A FAX NUMBER WITH THE NUMERIC KEYS Enter the destination fax number with the numeric keys.
Page 302: Retrieving A Fax Number From The Address Book
FACSIMILE RETRIEVING A FAX NUMBER FROM THE ADDRESS BOOK The address book screen shows stored destinations as one-touch keys. A destination fax number is retrieved by simply touching the one-touch key of that destination. This is called "one-touch dialing". It is also possible to store multiple fax numbers in a one-touch key, allowing you to retrieve all the numbers by simply touching the key.
Page 303: Retrieving A Stored Destination
FACSIMILE RETRIEVING A STORED DESTINATION A destination fax number is retrieved by simply touching the one-touch key of that destination. Touch the [Address Book] key. Scan Internet Fax USB Mem. Scan PC Scan Address Book Original Scan: Auto 8½x11 Send: Auto Direct TX Exposure...
Page 304: Checking And Deleting Entered Destinations
FACSIMILE CHECKING AND DELETING ENTERED DESTINATIONS When multiple destinations have been entered, you can display and check the destinations. You can also delete a destination (cancel selection of the destination). Touch the [Address Review] key. Condition Settings AAA AAA BBB BBB Address Review CCC CCC DDD DDD...
Page 305: Using A Search Number To Retrievea Destination
FACSIMILE USING A SEARCH NUMBER TO RETRIEVE A DESTINATION A destination stored in the address book can be retrieved using the key. This can be done in the base screen of any of the modes or in the address book screen. Touch the key.
Page 306: Retrieving A Destination From Aglobal Address Book
FACSIMILE RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK If an LDAP server is stored in the Web pages, you can look up a destination fax number in a global address book. Open the global address search screen. (1) Touch the [Address Book] key in the base Condition screen.
Page 307 FACSIMILE Select the destination. (1) Touch the key of the desired destination. Condition If no names are found that match the search letters, a Settings Detail message will appear. Touch the [OK] key to close the Address Review XXX AAA 0123456789 message and touch the [Search Again] key to search Search Again...
Page 308: Using The Resend Function
FACSIMILE USING THE RESEND FUNCTION The destinations of the most recent 8 transmissions by fax, Scan to E-mail, and/or Internet fax are stored. One of these can be selected to resend to that destination. Touch the [Resend] key. Ready to send. Speaker Resend Scan...
Page 309: Chain Dialing
FACSIMILE CHAIN DIALING Number sequences entered with the numeric keys and/or one-touch keys can be linked together with pauses and dialed as a single number. Use chain dialing to dial a long number (such as an international number) when the country code and/or area code are stored separately in one-touch keys.
Page 310: Basic Transmission Methods
FACSIMILE BASIC TRANSMISSION METHODS This section explains the basic procedures for sending a fax. TRANSMISSION METHODS The methods that can be used to send a fax from the machine are explained below. Select the method that best suits your needs. To fax a large number of sheet originals, use the automatic document feeder.
Page 311: Automatic Reduction Of The Transmitted Image
FACSIMILE To fax thick originals or pages of a book, use the document glass. ☞ USING THE DOCUMENT GLASS FOR TRANSMISSION (page 4-32) Transmission When the document glass is being used for a transmission, Quick Online transmission will not operate. If you wish to send a fax ahead of other previously reserved fax transmissions, use direct transmission mode.
Page 312: Transmittable Original Sizes
FACSIMILE TRANSMITTABLE ORIGINAL SIZES The following original sizes can be transmitted. Minimum original size Maximum original size Using the automatic document 5-1/2" (height) x 5-1/2" (width) 8-1/2" (height) x 19-5/5"* (width) feeder (140 mm (height) x 140 mm (width)) (216 mm (height) x 500 mm* (width)) Using the document glass 8-1/2"...
Page 313: Fax Destination Confirmation Mode
FACSIMILE FAX DESTINATION CONFIRMATION MODE The fax destination confirmation mode displays a destination confirmation message when a fax transmission is performed to prevent accidental transmission to the wrong destination. This function is enabled in the system settings (administrator). When the function is enabled, a message will appear to confirm the destination when the [BLACK & WHITE START] key is pressed to begin fax transmission.
Page 314: Using The Automatic Document Feeder For Transmission
FACSIMILE USING THE AUTOMATIC DOCUMENT FEEDER FOR TRANSMISSION This section explains how to use the automatic document feeder to send a fax. Place the originals face up in the document feeder tray with the edges Indicator aligned evenly. line Insert the originals all the way into the document feeder tray. Multiple originals can be placed in the document feeder tray.
Page 315: Using The Automatic Document Feeder To Send A Fax In Direct Transmission Mode
FACSIMILE USING THE AUTOMATIC DOCUMENT FEEDER TO SEND A FAX IN DIRECT TRANSMISSION MODE Place the originals face up in the document feeder tray with the edges Indicator aligned evenly. line Insert the originals all the way into the document feeder tray. Multiple originals can be placed in the document feeder tray.
Page 316 FACSIMILE • The following functions cannot be used with direct transmission: Program, Timer Transmission, Card Shot, Job Build, Polling Memory, Original Count, File, Quick File, Memory Box, 2-Sided Original Scanning, Global Address Search • Resending will not take place when a direct transmission is not successful due to a communication error or other reason. •...
Page 317: Using The Document Glass For Transmission
FACSIMILE USING THE DOCUMENT GLASS FOR TRANSMISSION To fax a thick original or other original that cannot be fed through the automatic document feeder, open the automatic document feeder and place the original on the document glass. Open the automatic document feeder, place the original face down on the document glass, and then gently close the automatic document feeder.
Page 318 FACSIMILE If you have another page to scan, change pages and then press the [BLACK & WHITE START] key. Repeat until all originals have been scanned. If no action is taken for one minute, scanning automatically ends and the transmission is reserved. Touch the [Read-End] key.
Page 319: Using The Document Glass To Send A Fax In Direct Transmission Mode
FACSIMILE USING THE DOCUMENT GLASS TO SEND A FAX IN DIRECT TRANSMISSION MODE When sending a fax from the document glass in direct transmission mode, only one page can be transmitted. Open the automatic document feeder, place the original face down on the document glass, and then gently close the automatic document feeder.
Page 320 FACSIMILE Press the [BLACK & WHITE START] key. Transmission begins. To cancel transmission... While "Dialing. Press [ ] to cancel" appears in the display, press the [STOP] key ( • The following functions cannot be used with direct transmission: Program, Timer Transmission, Card Shot, Job Build, Polling Memory, Original Count, File, Quick File, Memory Box, 2-Sided Original Scanning, Global Address Search •...
Page 321: Transmission Using The Speaker
FACSIMILE TRANSMISSION USING THE SPEAKER When the speaker is used to dial, the fax is sent after the number is dialed and the connection is established. If a person answers, you will be able to hear his or her voice, but you will not be able to speak. Place the original.
Page 322: Sending The Same Fax To Multiple Destinations (Broadcast Transmission)
FACSIMILE SENDING THE SAME FAX TO MULTIPLE DESTINATIONS (Broadcast Transmission) This function is convenient when you need to send the same fax to multiple destinations, such as sending a report to branch offices in different regions. You can transmit to as many as 500 destinations in one broadcast operation. Transmission Originals It is convenient to store destinations to which you frequently send faxes by broadcast transmission in group keys.
Page 323 FACSIMILE Enter the destination fax number. (1) Touch the [Address Book] key in the base CCC CCC Pause Next Address 0123456789 screen. Condition (2) Touch the one-touch key of the desired Settings AAA AAA BBB BBB Address Review destination. CCC CCC DDD DDD Address Entry EEE EEE...
Page 324 FACSIMILE Check the destinations and then touch Address Review the [OK] key. CCC CCC KKK KKK LLL LLL MMM MMM NNN NNN OOO OOO PPP PPP QQQ QQQ RRR RRR SSS SSS UUU UUU TTT TTT To cancel a specified destination... Touch the key of the destination that you wish to cancel.
Page 325 FACSIMILE Resending to unsuccessful broadcast transmission destinations The results of a completed broadcast transmission can be checked in the job status screen. If transmission to any of the destinations failed, resend the fax to those destinations. Touch the [JOB STATUS] key ( Touch the [Complete] key.
Page 326 FACSIMILE Resend to unsuccessful destinations. Detail Broadcast0001 (1) Touch the [Failed] tab. Retry Address Start Time Status (2) Touch the [Retry] key. DDD DDD 10:01 04/01 NG00000 10:10 04/01 NG00000 EEE EEE File Failed All Destinations (1) (2) • The procedure after the [Retry] key is touched varies depending on whether or not the document filing function was used.
Page 327: Sending A Fax Directly From Acomputer (Pc-Fax)
FACSIMILE SENDING A FAX DIRECTLY FROM A COMPUTER (PC-Fax) A document in a computer can be transmitted via the machine as a fax. Faxes are sent using the PC-Fax function in the same way as documents are printed. Select the PC-Fax driver as the printer driver on your computer and then select the Print command in the software application.
Page 328: Image Settings
FACSIMILE IMAGE SETTINGS Settings for scanning the original are selected in the base screen of each mode. The current state of each setting appears to the right of the key used to select the setting. Scan Internet Fax USB Mem. Scan PC Scan Address Book Original...
Page 329: Automatically Scanning Both Sides Of An Original (2-Sided Original)
FACSIMILE AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original) The automatic document feeder will automatically scan both sides of the document. Transmission 2-sided original Front and back are sent as two pages Touch the [Original] key. ☞ IMAGE SETTINGS (page 4-43) Specify the binding style of the 2-sided Fax/Original...
Page 330: Specifying The Scan Size And Send Size (Enlarge/Reduce)
FACSIMILE SPECIFYING THE SCAN SIZE AND SEND SIZE (Enlarge/Reduce) When an original size is set, the paper size that appears in the [Original] key is the paper size that is set in "Default Original Size Settings" in the system settings (administrator). The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size.
Page 331 FACSIMILE Specifying the original scan size (by paper size) If the original is a non-standard size or you wish to change the scan size, touch the [Original] key to specify the original size manually. Place the original in the document feeder tray or on the document glass and follow the steps below. Touch the [Original] key.
Page 332 FACSIMILE Touch the [OK] key. Fax/Original Scan Size 100% Send Size 5½x8½ Auto Image Orientation 2-Sided 2-Sided Tablet Booklet When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed. 4-47 Contents...
Page 333 FACSIMILE Specifying the original scan size (by numerical values) When scanning a non-standard size original such as a postcard or card, follow these steps to specify the original size. The width can be from 1" to 14" (25 mm to 356 mm), and the height can be from 1" to 8-1/2" (25 mm to 216 mm). Touch the [Original] key.
Page 334 FACSIMILE Touch the [OK] key. Fax/Original The specified size appears in the [Scan Size] key. Scan Size Send Size X11 Y8½ Auto Image Orientation 2-Sided 2-Sided Tablet Booklet • When the scan size is specified by numerical values, the send size cannot be specified. •...
Page 335 FACSIMILE Specifying the send size of the original Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If a send size smaller than the scan size is selected, the image will be reduced. The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by numerical values.
Page 336 FACSIMILE Specify the orientation in which the original is placed. Fax/Original (1) Touch the appropriate [Image Orientation] Scan Size 129% Send Size key. 8½x11 11x17 If the wrong orientation is selected here, the image may not be sent properly when using enlargement/reduction. Image Orientation (2) Touch the [OK] key.
Page 337: Changing The Exposure
FACSIMILE CHANGING THE EXPOSURE The exposure can be changed to match the darkness of the original. Refer the following tables to select appropriate settings. Exposure settings Exposure When to select Auto This setting automatically adjusts the exposure for light and dark parts of the original. Select this setting when the original consists of dark text.
Page 338: Changing The Resolution
FACSIMILE CHANGING THE RESOLUTION The resolution can be selected to match the characteristics of the original, such as text or photo, the size of the text, and the darkness of the image. Refer the following tables to select appropriate settings. Resolution settings Resolution When to select...
Page 339: Checking The Image To Be Transmitted (Preview)
FACSIMILE CHECKING THE IMAGE TO BE TRANSMITTED (Preview) If you touch the [Preview] key before scanning the original, you can check the scanned image in the touch panel before sending the image. * The factory default setting is disabled. Depending on the size of the transmission data, part of the preview image may not appear in the preview screen in the touch panel.
Page 340: Preview Check Screen
FACSIMILE PREVIEW CHECK SCREEN This section explains the preview check screen. Preview Sender Info Function Rev. Display Rotation Start Sending 0001 /0010 Preview image [Sender Info] key A preview of the scanned original appears. Touch to display the sender information for fax own If the image is cut off, use the scroll bars at the right and number.
Page 341: Fax Reception
FACSIMILE FAX RECEPTION This section explains the basic procedures for receiving faxes. RECEIVING FAXES When the reception mode is set to "Auto Reception", the machine will receive and print faxes automatically. The fax reception mode is displayed in the base screen. Scan Internet Fax USB Mem.
Page 342: Receiving A Fax
FACSIMILE RECEIVING A FAX When a fax is transmitted to the machine, the machine automatically receives and prints the fax. The machine rings and fax reception begins automatically. Beep A beep sounds when reception ends. • System Settings (Administrator): Speaker Settings This is used to change the volume and tone of the reception beep.
Page 343: Receiving A Fax Manually
FACSIMILE RECEIVING A FAX MANUALLY A fax can be received manually using the touch panel. While the machine rings, touch the [Speaker] key in the base screen and then touch the [Fax Manual Reception] key that appears. Telephone mode. Speaker Resend Scan Internet Fax...
Page 344: Printing A Password-Protected Fax (Hold Setting For Received Data Print)
FACSIMILE PRINTING A PASSWORD-PROTECTED FAX (Hold Setting For Received Data Print) "Hold Setting for Received Data Print" can be enabled in the system settings (administrator) to have faxes received to memory without being printed. To print the faxes, a password must be entered. When this function is used, a password entry screen appears in the touch panel when a fax is received.
Page 345: Checking The Image Before Printing
FACSIMILE CHECKING THE IMAGE BEFORE PRINTING When "Received Data Image Check Setting" is enabled* in the system settings (administrator), you can check a received image in the touch panel before printing it out. When this function is enabled, follow the steps below to print a received image.
Page 346: Checking The Image Before Forwarding
FACSIMILE CHECKING THE IMAGE BEFORE FORWARDING When "Received Data Image Check Setting" is enabledin the system settings (administrator), you can select the received data from the list and forward it to the addresses recorded in the address book. When this function is enabled, follow the steps below to forward the received image.
Page 347 FACSIMILE Start forward Touch the [Start forward.] key. AAA AAA BBB BBB Address Review CCC CCC DDD DDD EEE EEE FFF FFF GGG GGG HHH HHH III III JJJ JJJ Freq. ABCD EFGH IJKL MNOP QRSTU VWXYZ etc. Sort Address Start forward.
Page 348: Image Check Screen
FACSIMILE IMAGE CHECK SCREEN This section explains the image check screen. Image Check Back 0123456789 04/04/2013 10:28 1 / 3 Display Rotation Print 0001 0010 Information display "Display Rotation" key This shows information on the displayed image. This rotates the image right or left by 90 degrees. The rotation applies to all pages in the file, not just the Preview image displayed page.
Page 349: Forwarding Received Faxes
FACSIMILE FORWARDING RECEIVED FAXES (Fax Data Forward) When the machine cannot print because it is out of paper or out of toner, received faxes can be forwarded to another previously programmed fax machine. This function is convenient in an office or work area that has two or more telephone lines and another fax machine is connected to a different line than the machine.
Page 350: Forwarding Received Faxes To An Address (Inbound Routing Settings)
FACSIMILE FORWARDING RECEIVED FAXES TO AN ADDRESS (Inbound Routing Settings) You can have received faxes automatically forwarded to a facsimile internet fax, e-mail address, file server address, desktop address, or network folder address. This function can be used to forward received faxes to a specified address without printing them.
Page 351 FACSIMILE Enabling the inbound routing function. (1) In the Web page menu, click [Application Settings], [Inbound Routing Settings], and then [Administration Settings]. (2) Select [Enable] in "Inbound Routing" and click the [Submit] button. Users without administrator rights can be prohibited from storing, editing, and deleting forwarding tables in this screen, and from specifying which table is used.
Page 352 FACSIMILE Store a forwarding table. Follow the steps below to store a forwarding table that combines a specified sender and forwarding address. (1) Click [Inbound Routing Settings] in the Web page menu and click the [Add] button. (2) Enter a "Table Name". (3) Select the line used for reception.
Page 353 FACSIMILE Specifying forwarding tables to be used. To use the inbound routing function, enable the forwarding tables that you wish to use from among the stored tables. (1) Click [Inbound Routing Settings] in the Web page menu. (2) Select [Always Forward] or [Forward on Selected Day &...
Page 354: Special Modes
FACSIMILE SPECIAL MODES This section explains special modes that can be used for fax transmission. SPECIAL MODES When the [Special Modes] key is touched in the base screen, the special modes menu screen appears. The special modes menu consists of two screens. Touch the key to switch between the two screens.
Page 355 FACSIMILE [OK] key and [Cancel] key In some cases two [OK] keys and one [Cancel] key will appear in the special mode screens. The keys are used as follows: Fax/Special Modes Erase Cancel Edge Erase Edge (0~1) inch Side Erase (A) Enter the selected special mode setting and return to the base screen.
Page 356: Storing Fax Operations (Program)
FACSIMILE STORING FAX OPERATIONS (Program) A program is a group of transmission settings stored together. When transmission settings are stored in a program, the settings can be retrieved and used for a fax job by means of a simple operation. For example, suppose that the same 8-1/2"...
Page 357 FACSIMILE Place the original. Place the original in the document feeder tray or on the document glass as appropriate for the functions stored in the program. Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the [Program] key. ☞...
Page 358: Erasing Peripheral Shadows On The Image (Erase)
FACSIMILE ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase) The erase function is used to erase shadows on images produced when scanning thick originals or books. (This function erases the parts of the image where shadows tend to form. The function does not detect shadows and erase only the shadows.) Scanning a thick book Not using the erase...
Page 359 FACSIMILE Select the erase settings. (1) Touch the desired erase mode. Fax/Special Modes Select one of the 4 erase modes. Cancel Erase Touch the [Side Erase] key to open the following screen. Erase Edge Erase Edge Side Erase Cancel (0~1) inch Erase position for Original Side 2...
Page 360: Sending A Fax At A Specified Time
FACSIMILE SENDING A FAX AT A SPECIFIED TIME (Timer) When this function is used, transmission takes place automatically at a specified time. The timer transmission function makes it easy to perform reserved transmissions, broadcast transmissions and other transmissions at night or other times when phone rates are low. A timer setting can also be specified for polling reception to receive a fax when you are not present.
Page 361 FACSIMILE Set the time with the keys. (1) Specify the day. Fax/Special Modes Timer Cancel If you do not wish to specify a day, select [---]. In this case, transmission will begin when the time specified in (2) arrives. Day of the Week Time (2) Specify the time (hour, minute) Select the time in 24-hour format.
Page 362: Sending A Large Number Of Pages (Job Build)
FACSIMILE SENDING A LARGE NUMBER OF PAGES (Job Build) This function lets you separate an original consisting of numerous pages into sets, scan each set using the automatic document feeder, and transmit the pages in a single transmission. Use this function when there are more original pages than can be placed at once in the auto document feeder.
Page 363 FACSIMILE Press the [BLACK & WHITE START] key to scan the first set. To cancel scanning... Press the [STOP] key ( Insert the next set of originals and press the [BLACK & WHITE START] key. Repeat this step until all originals have been scanned. To cancel scanning...
Page 364: Transmitting Originals Of Different Sizes (Mixed Size Original)
FACSIMILE TRANSMITTING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original) This feature lets you scan and transmit originals of different sizes at the same time; for example, 5-1/2" x 8-1/2" (A5) size originals mixed together with 8-1/2" x 11" (A4) size originals. When scanning the originals, the machine automatically detects the size of each original.
Page 365 FACSIMILE Press the [BLACK & WHITE START] key. Scanning begins. A beep will sound to indicate that scanning is finished. To cancel scanning... Press the [STOP] key ( • Once mixed size originals has been selected, an original scan size cannot be specified. •...
Page 366: Sending Both Sides Of A Card As A
FACSIMILE SENDING BOTH SIDES OF A CARD AS A SINGLE PAGE (Card Shot) This function lets you send the front and reverse sides of a card as a single page, without the need to send each side separately. Transmitted image Originals Transmission Front...
Page 367 FACSIMILE Specify the original size. (1) Enter the original size. Fax/Special Modes • Touch the [X] key and enter the horizontal dimension Cancel Card Shot (X) of the original with the keys. • Touch the [Y] key and enter the vertical dimension (Y) (1~8 1/2) Fit to inch...
Page 368 FACSIMILE Touch the [Read-End] key. Place next original. (Pg.No.x) Press [Start]. When finished, press [Read-End]. Configure Read-End If you will continue by scanning the front of the card, you can touch the [Configure] key to change the exposure, resolution, scan size, and send size. •...
Page 369: Checking The Number Of Scanned Original Sheets Before Transmission (Original Count)
FACSIMILE CHECKING THE NUMBER OF SCANNED ORIGINAL SHEETS BEFORE TRANSMISSION (Original Count) The number of scanned original sheets can be counted and displayed before transmission. Checking the number of scanned original sheets before transmission helps prevent transmission mistakes. Insert the originals face up in the document feeder tray.
Page 370 FACSIMILE When scanning ends, check the number of original sheets scanned and touch the [OK] key. XX pages of original have been scanned. (P.x) Send the scanned data? Transmission will begin. • When Job Build mode is used, the confirmation message will appear after the [Read-End] key is touched.
Page 371 FACSIMILE CHANGING THE PRINT SETTINGS FOR THE TRANSACTION REPORT (Transaction Report) A transaction report is automatically printed out to alert you when a transmission fails or when a broadcast transmission is performed. The transaction report contains a description of the transmission (date, start time, name of other party, time required, number of pages, result, etc.).
Page 372 FACSIMILE Press the [BLACK & WHITE START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. When scanning finishes, place the next original and press the [BLACK &...
Page 373: Adding Your Sender Information To Faxes (Own Number Sending)
FACSIMILE ADDING YOUR SENDER INFORMATION TO FAXES (Own number sending) Your sender information (date, time, sender name, sender fax number, number of pages) is automatically added to the top of each fax page you transmit. Example of the sender information printed APR/04/2020/Thu 3:00 PM AAAAA FAX No.
Page 374: Temporarily Changing The Sender Information (Own Name Select)
FACSIMILE TEMPORARILY CHANGING THE SENDER INFORMATION (Own Name Select) You can select the sender information printed on a transmitted fax from a list of stored senders. Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Own Name Select] key.
Page 375: Calling A Fax Machine And Initiating Reception (Polling)
FACSIMILE CALLING A FAX MACHINE AND INITIATING RECEPTION (Polling) The Polling function allows the receiving machine to call the transmitting machine and initiate reception of a document in that machine. Because the receiving machine initiates reception of a document, this is called "Polling Reception". (1) Requests fax transmission.
Page 376 FACSIMILE Press the [BLACK & WHITE START] key. Your machine will call the other machine and initiate reception of the fax. • Polling reception can be used in combination with the timer function to poll at any specified time, such as at night or when you are not present (Only one timer polling reception can be set.).
Page 377: Initiating Polling Reception Manually
FACSIMILE INITIATING POLLING RECEPTION MANUALLY Use this procedure when you must start polling after listening to a recorded greeting, such as when using a fax information service. • Make sure that an original is not placed in the machine when using the polling reception function. •...
Page 378: Sending A Fax When Another Machine Polls Your Machine (Polling Memory)
FACSIMILE SENDING A FAX WHEN ANOTHER MACHINE POLLS YOUR MACHINE (Polling Memory) Sending a document that has been scanned into memory when another machine polls your machine is called "Polling Memory". Prior to polling, the document that will be faxed to the other machine must be scanned into a polling memory box. This function can only be used when the other machine is Super G3 or G3 compatible and has a polling function.
Page 379: Scanning A Document Into Polling Memory
FACSIMILE SCANNING A DOCUMENT INTO POLLING MEMORY Follow these steps to scan a document into the memory box for polling transmission (Public Box). Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes.
Page 380 FACSIMILE Select image settings and special Memory Box - Data Store modes. Memory Box Auto Auto Original Scan: 8½x11 Send: List Auto Exposure Resolution Standard Special Modes Auto Reception Fax Memory:100% • A program, timer setting, transaction report, polling, and document filing cannot be selected. •...
Page 381: Checking The Document In The Public Box
FACSIMILE CHECKING THE DOCUMENT IN THE PUBLIC BOX You can check the document stored in the machine's public box for memory polling. Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Memory Box] key.
Page 382: Deleting A Document From The Public Box
FACSIMILE DELETING A DOCUMENT FROM THE PUBLIC BOX Delete a document from the Public Box when it is no longer needed. Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Memory Box] key.
Page 383: Performing F-Code Communication
FACSIMILE PERFORMING F-CODE COMMUNICATION This section explains how to perform F-code communication operations. F-code communication is possible with machines of other manufacturers that also support F-code communication. F-CODE COMMUNICATION Exchange of confidential documents (confidential communication), retrieval (polling) and distribution (polling memory) of information, distribution of information to multiple destinations (relay broadcast transmission) are possible with other machines that support F-code communication.
Page 384: Creating Memory Boxes In The Machine For F-Code Communication
FACSIMILE CREATING MEMORY BOXES IN THE MACHINE FOR F-CODE COMMUNICATION Before the F-code communication function can be used, special memory boxes must be created using "F-Code Memory Box" in the system settings. A box name and F-code (sub-address and passcode) are programmed in each box, and an F-code communication function is assigned to each box.
Page 385: Confidential Communication Using F-Codes
FACSIMILE CONFIDENTIAL COMMUNICATION USING F-CODES By sending a fax to an F-code memory box (confidential) in the receiving machine (your machine or the other machine), the sender can direct the transmission specifically to the user of the box. This is convenient for sending sensitive documents that you do not wish people other than the recipient to see, or when the receiving machine is shared by multiple departments.
Page 386: F-Code Confidential Transmission
FACSIMILE F-CODE CONFIDENTIAL TRANSMISSION Follow the steps below to send a confidential fax by adding an F-code to the fax number. Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Enter the destination fax number.
Page 387: Checking Faxes Received By F-Code Confidential Reception
FACSIMILE CHECKING FAXES RECEIVED BY F-CODE CONFIDENTIAL RECEPTION When an F-code confidential fax is sent to your machine, the fax is received to the memory box specified by the F-code. To check received faxes, enter the print passcode. The machine rings and the fax is received.
Page 388: Numeric Keys
There is no way to check a forgotten passcode on the machine. Take care not to forget the passcode. In the event that you forget the passcode or need to verify the passcode, contact your dealer or nearest SHARP Service Department.
Page 389: Polling Reception Using F-Codes
FACSIMILE POLLING RECEPTION USING F-CODES This function enables your machine to call another machine and initiate reception of a fax stored in an F-code memory box (polling memory) in the other machine. During the polling operation, your machine must correctly specify the F-code (sub-address and passcode) configured in the other machine or polling reception will not take place.
Page 390 FACSIMILE Enter the destination fax number. (1) Touch the [Address Book] key in the base Condition screen. Settings AAA AAA BBB BBB Address Review (2) Touch the one-touch key of the desired CCC CCC DDD DDD Address Entry destination. EEE EEE FFF FFF Global GGG GGG...
Page 391: Polling Memory Transmission Using F-Codes
FACSIMILE POLLING MEMORY TRANSMISSION USING F-CODES When your machine receives a transmission request from another machine, this function sends a fax stored in an F-code memory box (polling memory) in your machine to that machine. The other machine must correctly specify the F-code configured in your machine or transmission will not take place.
Page 392 FACSIMILE Touch the [Data Store] key. Memory Box Exit Confidential Polling Memory Reception Data Store Data Check Data Check Delete Data Touch the key of the F-code memory Back Memory Box - Data Store polling box. Public Box Box 1 Box 2 Box 3 Box 4...
Page 393 FACSIMILE Press the [BLACK & WHITE START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. • If you are scanning the original on the document glass, scan each page one page at a time. When scanning finishes, place the next original and press the [BLACK &...
Page 394: Checking The Document In The F-Code Memory Polling Box
FACSIMILE CHECKING THE DOCUMENT IN THE F-CODE MEMORY POLLING BOX You can check the document stored in the F-code memory polling box. A document in a memory box cannot be printed while the document is being transmitted. Select the special modes. (1) Touch the [Special Modes] key.
Page 395: Deleting A Document Stored For F-Code Polling Transmission
FACSIMILE DELETING A DOCUMENT STORED FOR F-CODE POLLING TRANSMISSION When a document in an F-code memory polling box is no longer needed, follow the steps below to delete it. A document in a memory box cannot be deleted while the document is being transmitted. Select the special modes.
Page 396: Relay Request Transmission Using F-Codes
FACSIMILE RELAY REQUEST TRANSMISSION USING F-CODES This function is used to send a fax to an F-code relay broadcast memory box in another machine and have that machine relay the fax to multiple end receiving machines. When the end receiving machines are far from your machine, sending the fax to a relay machine that is close to the end receiving machines can help reduce phone charges.
Page 397 FACSIMILE Enter the destination fax number. (1) Touch the [Address Book] key in the base Condition screen. Settings AAA AAA BBB BBB Address Review (2) Touch the one-touch key of the desired CCC CCC DDD DDD Address Entry destination. EEE EEE FFF FFF Global GGG GGG...
Page 398: Relay Broadcast Transmission Using F-Codes
FACSIMILE RELAY BROADCAST TRANSMISSION USING F-CODES When your machine receives an F-code relay request transmission, the fax is received to an F-code relay broadcast memory box in your machine. Your machine then relays the fax to each of the end receiving machines programmed in the memory box.
Page 399: Using An Extension Phone
• If the plug on the telephone line cord does not fit into the jack on your extension phone, contact your dealer or nearest SHARP Service Department. 4-114...
Page 400: Receiving A Fax After Answeringa Call On The Extension Phone (Remote Reception)
FACSIMILE RECEIVING A FAX AFTER ANSWERING A CALL ON THE EXTENSION PHONE (Remote Reception) Follow the steps below if you need to start fax reception after answering a call and speaking on the extension phone. If you are on a pulse-dial (rotary) line, set the extension phone to issue tone signals. When you hear ringing, answer the call on the extension phone.
Page 401: Checking The Status Of Fax Jobs
FACSIMILE CHECKING THE STATUS OF FAX JOBS This section explains how to check the status of reserved transmission jobs and received faxes. JOB STATUS SCREEN The job status screen is displayed when the [JOB STATUS] key on the operation panel is pressed. The job status screen shows the status of jobs by mode.
Page 402: Job Queue Screen And Completed Job Screen
FACSIMILE JOB QUEUE SCREEN AND COMPLETED JOB SCREEN The job status screen consists of two screens: the job queue screen, which shows reserved jobs and the job currently in progress, and the completed jobs screen. To switch between the two screens, touch the job status screen selector key ((2) below).
Page 403 FACSIMILE Job key display The following information is shown in the job queue keys and completed job keys that appear in the job status screen. AAA AAA 10:22 04/01 000/004 Waiting Indicates the number (position) of the job in the job Time reserved / Time started queue.
Page 404 FACSIMILE • Completed job Message Status "Send OK" Transmission completed. "In Memory" Reception completed but the fax has not been printed. "Received" Printed received fax data. "Forward OK" The received fax has been forwarded. "Stopped" The job was stopped. "Delete" Deleted received data in the image check screen.
Page 405: Operation When A Job In The Job Queue Is Completed
FACSIMILE OPERATION WHEN A JOB IN THE JOB QUEUE IS COMPLETED When a normal transmission job is completed, it moves to the completed jobs screen and "Send OK" appears in the status column. Received faxes, timer transmission jobs, retry jobs, and forwarding jobs are handled in the job status screen as explained below.
Page 406: Checking A Reserved Job Or The Job In Progress
FACSIMILE CHECKING A RESERVED JOB OR THE JOB IN PROGRESS The detailed contents of a broadcast transmission or serial polling job can be displayed. Select (touch) the key of the job that you wish to check and touch the [Detail] key. The job details screen will appear (see below). Detail Broadcast0001 Progress:...
Page 407: Checking Completed Jobs
FACSIMILE CHECKING COMPLETED JOBS You can check a list of the destinations, the destinations for which transmission failed, and other detailed information on completed broadcast transmission jobs, received fax forwarding jobs, serial polling jobs, and jobs that used document filing. Touch the key of the desired job in the completed jobs screen and touch the [Detail] key. The job detail screen (see below) will appear.
Page 408: Canceling A Fax In Progress Or Areserved Fax
FACSIMILE CANCELING A FAX IN PROGRESS OR A RESERVED FAX Follow the steps below to cancel a fax transmission that is in progress or a reserved fax job. Press the [JOB STATUS] key ( Select the fax job that you wish to Print Job Scan to Fax Job...
Page 409: Giving Priority To A Reserved Fax
FACSIMILE GIVING PRIORITY TO A RESERVED FAX When multiple jobs are waiting to be transmitted, the jobs are normally transmitted in the order they were reserved. If you need to give priority to a job and send it ahead of the other jobs, follow the steps below. Press the [JOB STATUS] key ( Select the fax job to which you wish to Print Job...
Page 410: Checking The Activity Log (Image Sending Activity Report)
FACSIMILE CHECKING THE ACTIVITY LOG (Image Sending Activity Report) IMAGE SENDING ACTIVITY REPORT You can have the machine print a log of recent image sending activity (date, name of other party, time required, result, etc.). The Image Sending Activity Report contains useful information such as the types of errors that occurred. The most recent 200 transactions are included in the report.
Page 411: Information Appearing In The Result Column
FACSIMILE INFORMATION APPEARING IN THE RESULT COLUMN Error types and other information are printed in the result column of transaction and activity reports. When a transaction report or activity report is printed, check the result of the transaction in the result column and take action as needed. Examples of messages that are printed in the result column Message Explanation...
Page 412 CHAPTER 5 SCANNER/INTERNET FAX This chapter provides detailed explanations of the procedures for using the scanner function and the Internet fax function. USB memory mode can be used without installing a peripheral device. To use the Internet fax function, the Internet fax expansion kit must be installed. TRANSMITTING AN IMAGE BEFORE USING THE MACHINE AS A NETWORK SCANNER...
Page 413 SCANNER/INTERNET FAX INTERNET FAX RECEPTION FUNCTIONS SPECIAL MODES RECEIVING AN INTERNET FAX ... . . 5-104 SPECIAL MODES ......5-71 •...
Page 414: Before Using The Machine As Anetwork Scanner
SCANNER/INTERNET FAX BEFORE USING THE MACHINE AS A NETWORK SCANNER This section provides information that you should know before using the machine as a network scanner. NETWORK SCANNER FUNCTION The network scanner function of the machine can be used to scan an original, create an image file, and send the file over a network to a computer, FTP server, or other destination.
Page 415: Usb Memory Scan
SCANNER/INTERNET FAX USB memory mode ☞ SENDING AN IMAGE IN USB MEMORY MODE (page 5-35) USB Memory Scan The scanned file is sent to and stored in a USB memory device connected to the machine. Internet fax mode To use the Internet fax function, Internet fax expansion kit must be installed. ☞...
Page 416: Preparations For Use As A Network Scanner
SCANNER/INTERNET FAX PREPARATIONS FOR USE AS A NETWORK SCANNER MAKE SURE THE MAIN POWER SWITCH IS IN THE "ON" POSITION The main power is "on" when the main power indicator on the right side of the operation panel is lit. If the main power indicator is not lit, the main power is "off".
Page 417: Settings Required In The Web Pages
SCANNER/INTERNET FAX SETTINGS REQUIRED IN THE WEB PAGES To use scan mode and Internet fax mode, the basic network scanner settings, server settings such SMTP and DNS server settings, and sender addresses must be configured in the Web pages. • Server settings To configure server settings, click [Network Settings] and then [Services Settings] in the Web page menu.
Page 418: Storing A Destination For Scan To Desktop
SCANNER/INTERNET FAX STORING A DESTINATION FOR SCAN TO DESKTOP To store your computer in the machine as a destination for Scan to Desktop, Network Scanner Tool must be installed from the "Sharpdesk/Network Scanner Utilities" CD-ROM that accompanies the machine. To scan an image to your computer, Network Scanner Tool must be running on your computer.
Page 419: Before Sending To A Direct Smtp Address
SCANNER/INTERNET FAX BEFORE SENDING TO A DIRECT SMTP ADDRESS The machine supports Direct SMTP, which lets you directly send Internet faxes within your company without using a mail server. For the procedure for storing a Direct SMTP address in the address book, see "STORING DESTINATION ADDRESSES FOR EACH SCAN MODE IN THE ADDRESS BOOK"...
Page 420: Base Screen
SCANNER/INTERNET FAX BASE SCREEN Scan mode, USB memory mode, Internet fax mode, and PC scan mode are used by selecting operations and settings in the base screens of those modes. To display the base screen of a mode, touch the [IMAGE SEND] key in the touch panel and then touch the tab of the mode that you wish to use.
Page 421 SCANNER/INTERNET FAX Customized keys (13) [Special Modes] key The keys that appear here can be changed to show Touch this key to use a special mode. ☞ settings or functions that you prefer. SPECIAL MODES (page 5-71) ☞ Customizing displayed keys (page 5-11) (14) [Stored to] key [Preview] key...
Page 422 SCANNER/INTERNET FAX Customizing displayed keys Special mode keys and other keys can be displayed in the base screen. Set these keys to functions that you frequently use to access the functions with a single touch. The customized keys are configured using "Customize Key Setting" in the Web pages.
Page 423: Address Book Screen
SCANNER/INTERNET FAX ADDRESS BOOK SCREEN This screen is used to select transmission destinations. (10) (11) AAA AAA xxx@xx.xxx.com Condition (12) Settings AAA AAA BBB BBB Address Review CCC CCC DDD DDD Address Entry EEE EEE FFF FFF Global GGG GGG HHH HHH Address Search III III...
Page 424: Changing The Display Of One-Touch Keys In The Address Book Screen
SCANNER/INTERNET FAX • Icons appear in the one-touch keys in the address book to indicate which mode is used for transmission. ☞ RETRIEVING A DESTINATION FROM THE ADDRESS BOOK (page 5-18) • For information on storing addresses in the address book, see "STORING DESTINATION ADDRESSES FOR EACH SCAN MODE IN THE ADDRESS BOOK"...
Page 425 SCANNER/INTERNET FAX Index display Indexes make it easy to search for a destination (one-touch key). The destinations are displayed separately using alphabetical search characters and index numbers. To display a stored destination, touch the appropriate index tab. It is convenient to store frequently used destinations in the [Freq.] index. Specify that a destination be displayed in the [Freq.] index when you store the destination.
Page 426: Scan Send Sequence
SCANNER/INTERNET FAX SCAN SEND SEQUENCE This section explains the basic procedure for scanning and transmission. Select settings in the order shown below to ensure smooth transmission. For the detailed procedures for selecting the settings, see the explanation of each setting in this chapter. Place the original.
Page 427 SCANNER/INTERNET FAX Special mode settings Special modes can be selected. ☞ Scan Internet Fax USB Mem. Scan PC Scan SPECIAL MODES (page 5-71) Address Book Original Scan: Auto 8½x11 Send: Auto Address Entry Exposure Auto Text Send Settings Resolution 200X200dpi Address Review File Format File...
Page 428: Original Sizes
SCANNER/INTERNET FAX ORIGINAL SIZES TRANSMITTABLE ORIGINAL SIZES The following original sizes can be transmitted Minimum original size Maximum original size Using the automatic document 5-1/2" (height) x 5-1/2" (width) 8-1/2" (height) x 19-5/5"* (width) feeder (140 mm (height) x 140 mm (width)) (216 mm (height) x 500 mm* (width)) Using the document glass 8-1/2"...
Page 429: Entering Destinations
SCANNER/INTERNET FAX ENTERING DESTINATIONS This section explains how to specify destination addresses, including selecting an address from the address book and retrieving an address by entering a search number. RETRIEVING A DESTINATION FROM THE ADDRESS BOOK The address book screen shows stored destinations as one-touch keys. The destinations are displayed in order by search number.
Page 430: Retrieving A Destination
SCANNER/INTERNET FAX RETRIEVING A DESTINATION A destination is retrieved by selecting its one-touch key. Touch the [Address Book] key. Scan Internet Fax USB Mem. Scan PC Scan Address Book Original Scan: 8½x11 Send: Auto Address Entry Exposure Auto Text Send Settings Resolution 200X200dpi Address Review...
Page 431: Checking And Deleting The Selected Destinations
SCANNER/INTERNET FAX CHECKING AND DELETING THE SELECTED DESTINATIONS When multiple destinations have been selected, you can display and check the destinations. You can also delete a destination from the list (cancel selection of the destination). Touch the [Address Review] key. Condition Settings AAA AAA...
Page 432: Using A Search Number To Retrievea Destination
SCANNER/INTERNET FAX USING A SEARCH NUMBER TO RETRIEVE A DESTINATION A destination stored in the address book can be retrieved using the key. This can be done in the base screen of any of the modes or in the address book screen. Touch the key.
Page 433: Entering An Address Manually
SCANNER/INTERNET FAX ENTERING AN ADDRESS MANUALLY Scan to E-mail, Internet fax, Network Folder and data entry mode addresses can be manually entered. Display the address input screen. (1) Touch the [Address Book] key in the base screen. Condition Settings AAA AAA BBB BBB Before touching the [Address Entry] key in the base Address Review...
Page 434: Specifying A Network Folder
SCANNER/INTERNET FAX SPECIFYING A NETWORK FOLDER A network folder on a server or computer connected to the same network as the machine can be directly specified. Select [Network Folder] in step 2 on the previous page and follow the steps below. Touch the [Browse] key.
Page 435 SCANNER/INTERNET FAX Access the network folder. (1) Touch the key of the workgroup that you Select workgroup. Search wish to access. Workgroup Cancel Workgroup Name Work 1 Work 2 Work 3 Work 4 Work 5 Work 6 (2) Touch the key of the server or computer that you wish to access.
Page 436: Retrieving A Destination From Aglobal Address Book
SCANNER/INTERNET FAX RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK When an LDAP server is configured in the Web pages, you can look up an address in a global address book and retrieve the address for Scan to E-mail or Internet fax transmission (excluding Direct SMTP addresses). Open the global address search screen.
Page 437 SCANNER/INTERNET FAX Select the destination. (1) Touch the key of the desired destination. Condition If no names are found that match the search characters, a Settings Detail message will appear. Touch the [OK] key to close the Address Review XXX AAA AAA@xx.xxx.com message and touch the [Search Again] key to search Search Again...
Page 438: Using The Resend Function
SCANNER/INTERNET FAX USING THE RESEND FUNCTION The destinations of the most recent 8 transmissions by Scan to E-mail, Internet fax (including Direct SMTP addresses) and/or fax are stored. One of these can be selected to resend to that destination. Touch the [Resend] key. Ready to send.
Page 439: Transmitting An Image
SCANNER/INTERNET FAX TRANSMITTING AN IMAGE SENDING AN IMAGE IN SCAN MODE This section explains the basic procedure for transmission in scan mode (Scan to E-mail, Scan to FTP, Scan to Desktop, and Scan to Network Folder). • When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed, the destination cannot be changed, and destinations cannot be added.
Page 440 SCANNER/INTERNET FAX Specify the destination. (1) Touch the [Address Book] key in the base screen. Condition Settings AAA AAA BBB BBB Address Review (2) Touch the one-touch key of the desired CCC CCC DDD DDD Address Entry destination. EEE EEE FFF FFF Global GGG GGG...
Page 441 SCANNER/INTERNET FAX Specify the orientation in which the original is placed. Scan/Original To enable the original to be scanned in the correct orientation (the orientation of the top edge of the original that is shown at Scan Size 100% Send Size the top of the display), specify the orientation in which the 8½x11 Auto...
Page 442 SCANNER/INTERNET FAX Touch the [Read-End] key. Place next original. (Pg.No.x) A beep will sound to indicate that the operation is completed. Press [Start]. Open the automatic document feeder and remove the original. When finished, press [Read-End]. Configure Read-End • If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the transmission is reserved.
Page 443: Changing The Subject, File Name, Reply-To, And Body Text
SCANNER/INTERNET FAX CHANGING THE SUBJECT, FILE NAME, REPLY-TO, AND BODY TEXT The subject, file name, reply-to, and body text can be changed when performing a scan transmission. Preset items can be selected or text can be directly entered. • When performing Scan to FTP, Scan to Desktop, or Scan to Network Folder, only the file name is used. •...
Page 444 SCANNER/INTERNET FAX To change the file name, touch the [File Send Settings Name] key. Subject Sub: Schedule coordination meeting • The file name is entered in the same way as the subject. • If you are sending to a Scan to FTP, Scan to Desktop, or File Name Scan to Network Folder destination, go to step 9.
Page 445 SCANNER/INTERNET FAX To change the body text, touch the Send Settings [Body Text] key. Subject Sub: Schedule coordination meeting File Name Material for planning meeting Reply-To AAA AAA Body Text Add 'Reply to' to Cc Enter the body text and touch the [OK] Clear All Body Entry key.
Page 446: Sending An Image In Usb Memory Mode
SCANNER/INTERNET FAX SENDING AN IMAGE IN USB MEMORY MODE Follow the steps below to send a scanned image to a commercially available USB memory device that has been connected to the machine. This stores the file in the USB device. •...
Page 447 SCANNER/INTERNET FAX Switch to USB memory mode and display the image settings screen. Scan Internet Fax USB Mem. Scan PC Scan (1) Touch the [USB Mem. Scan] tab Stored to Original Send: Auto Scan: Auto 8½x11 File Name If the [USB Mem. Scan] tab does not appear, touch the Exposure Auto Text...
Page 448 SCANNER/INTERNET FAX Press the [COLOR START] key or the [BLACK & WHITE START] key. Scanning begins. • If the original is placed on the document glass, the [Read-End] key appears in the touch panel. If the original is only one page, go to step 7.
Page 449 SCANNER/INTERNET FAX When "Sending data has been completed." appears in the touch panel, disconnect the USB memory. Do not disconnect the USB memory while "Processing data." or "Sending data." appears in the touch panel. • When transmission to USB memory is completed, "Sending data has been completed." is displayed. After a brief interval the message is cleared and the base screen of image send mode reappears.
Page 450: Specify The Folder In Which The File Will Be Stored
SCANNER/INTERNET FAX SPECIFY THE FOLDER IN WHICH THE FILE WILL BE STORED When sending a file to USB memory, a folder can be specified in USB memory. A new folder can also be created in USB memory. If a folder is not specified, the file will be stored on the first level of the USB memory. Touch the [Stored to] key.
Page 451: Entering A File Name
SCANNER/INTERNET FAX ENTERING A FILE NAME The file name can be directly entered when performing a scan transmission. • If the file name is not entered, the settings in the Web page are used. • For the procedure for entering text, see "ENTERING TEXT"...
Page 452: Sending A Fax In Internet Fax Mode
SCANNER/INTERNET FAX SENDING A FAX IN INTERNET FAX MODE The basic procedure for sending a fax in Internet fax mode is explained below. This procedure can also be used to perform direct transmission by Direct SMTP. • When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed, the destination cannot be changed, and destinations cannot be added.
Page 453 SCANNER/INTERNET FAX Switch to Internet fax mode and display (1) (2) the image settings screen. Scan Internet Fax USB Mem. Scan PC Scan (1) Touch the [Internet Fax] tab. Address Book Original Scan: Auto Send: Auto 8½x11 Address Entry Exposure Auto (2) Touch the [Original] key.
Page 454 SCANNER/INTERNET FAX Touch the [Read-End] key. Place next original. (Pg.No.x) A beep will sound to indicate that the operation is completed. Press [Start]. Open the automatic document feeder and remove the original. When finished, press [Read-End]. Read-End Configure • If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the transmission is reserved.
Page 455: Changing The Subject, File Name, And Body Text
SCANNER/INTERNET FAX CHANGING THE SUBJECT, FILE NAME, AND BODY TEXT The subject, file name, and body text can be changed when performing an Internet fax transmission. Preset items can be selected or text can be directly entered. • If the subject and file name are not changed, the settings in the Web page are used. •...
Page 456 SCANNER/INTERNET FAX To change the file name, touch the [File Send Settings Name] key. Subject Sub: Schedule coordination meeting The file name is entered in the same way as the subject. File Name Body Text To change the body text, touch the Send Settings [Body Text] key.
Page 457 SCANNER/INTERNET FAX Touch the [OK] key. Send Settings Subject Sub: Schedule coordination meeting File Name Material for planning meeting Body Text Thank you for your continuous support. We have attached sca When storing pre-set text for the subject and file name in the Web pages, up to 80 characters can be entered. System Settings (Administrator): The Number of File Name/Subject/Body Keys Displayed Setting The setting for the number of subject keys and file name keys displayed in one screen can be changed to 6, 12, or 18.
Page 458: Sending The Same Image To Multiple Destinations (Broadcast Transmission)
SCANNER/INTERNET FAX SENDING THE SAME IMAGE TO MULTIPLE DESTINATIONS (Broadcast Transmission) The same scanned image can be sent to multiple scan modes, Internet fax mode, and fax mode destinations in a single operation. Up to 500 destinations can be selected in one broadcast operation. Transmission Originals If you frequently use broadcasting to send images to the same group of destinations, it is convenient to store those...
Page 459 SCANNER/INTERNET FAX Specify the destination. (1) Touch the [Address Book] key in the base Condition screen. Settings BBB BBB AAA AAA Address Review (2) Touch the one-touch key of the desired CCC CCC DDD DDD Address Entry destination. EEE EEE FFF FFF Global GGG GGG...
Page 460 SCANNER/INTERNET FAX Press the [COLOR START] key or the [BLACK & WHITE START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. •...
Page 461: Broadcast Transmissions That Include Internet Fax Destinations
SCANNER/INTERNET FAX BROADCAST TRANSMISSIONS THAT INCLUDE INTERNET FAX DESTINATIONS When a broadcast transmission includes both scan mode and Internet Fax mode destinations, the Internet Fax mode settings (original orientation and other various settings) are given priority. When performing this type of broadcast transmission, note the information below.
Page 462 SCANNER/INTERNET FAX Display details on the broadcast transmission. Print Job Internet Fax Scan to Fax Job (1) Touch the key of the completed broadcast Address Start Time Pages Status Broadcast0001 10:00 04/01 010/003 NG000000 Job Queue transmission. 10:05 04/01 001/001 Send OK Complete Broadcast0002 Broadcast0003...
Page 463: Sending An Internet Fax From Acomputer (Pc-I-Fax)
SCANNER/INTERNET FAX SENDING AN INTERNET FAX FROM A COMPUTER (PC-I-Fax) A file on a computer can be sent via the machine as an Internet fax (PC-I-Fax function). Internet faxes are sent using the PC-I-Fax function in the same way as documents are printed. Select the PC-Fax driver as the printer driver for your computer and then select the Print command in the software application.
Page 464: Image Settings
SCANNER/INTERNET FAX IMAGE SETTINGS Settings for scanning the original are selected in the base screen of each mode. The current state of each setting appears to the right of the key used to select the setting. Scan Internet Fax USB Mem. Scan PC Scan Address Book Original...
Page 465: Automatically Scanning Both Sides Of An Original (2-Sided Original)
SCANNER/INTERNET FAX AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original) The automatic document feeder can be used to automatically scan both sides of an original. Scan transmission 2-sided original Front and reverse sides are scanned Select the mode and display the image settings screen. (1) Touch the tab of the mode that you wish to use.
Page 466: Specifying The Original Scan Size And Send Size (Enlarge/Reduce)
SCANNER/INTERNET FAX SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce) When an original size is set, the paper size that appears in the [Original] key is the paper size that is set in "Default Original Size Settings" in the system settings (administrator). The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size.
Page 467 SCANNER/INTERNET FAX Specifying the original scan size (by paper size) If the original is a non-standard size or you wish to change the scan size, touch the [Original] key to specify the original size manually. Place the original in the document feeder tray or on the document glass and follow the steps below. Select the mode and display the image settings screen.
Page 468 SCANNER/INTERNET FAX Specifying the original scan size (by numerical values) When scanning a non-standard size original such as a card, follow these steps to specify the original size. The width can be from 1" to 14" (25 mm to 356 mm), and the height can be from 1" to 8-1/2" (25 mm to 216 mm). Select the mode and display the image settings screen.
Page 469 SCANNER/INTERNET FAX Touch the [OK] key. Scan/Original The specified size appears in the [Scan Size] key. Scan Size Send Size X11 Y8½ Auto Image Orientation 2-Sided 2-Sided Tablet Booklet • When the scan size is specified by numerical values, the send size cannot be specified. •...
Page 470: Specifying The Send Size Of The Image
SCANNER/INTERNET FAX Specifying the send size of the image Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If a send size smaller than the scan size is selected, the image will be reduced. •...
Page 471 SCANNER/INTERNET FAX Specify the orientation in which the original is placed. Scan/Original (1) Touch the appropriate [Image Orientation] Scan Size 129% Send Size key. 8½x11 11x17 If this setting is not correct when sending an image with a changed ratio, a suitable image may not be transmitted. Image Orientation (2) Touch the [OK] key.
Page 472: Changing The Exposure And Original Image Type
SCANNER/INTERNET FAX CHANGING THE EXPOSURE AND ORIGINAL IMAGE TYPE The exposure and original image type can be set appropriately for the original to enable optimum scanning. Refer the following tables to select appropriate settings. How to select the exposure Exposure When to select Auto This setting automatically adjusts the exposure for light and dark parts of the original.
Page 473 SCANNER/INTERNET FAX Select the exposure and original image type. Scan mode, USB memory mode, Data entry mode (1) Select the original image type. Touch the original image type key that matches the Scan/Exposure original image type. Auto (2) Adjust the exposure with the keys.
Page 474: Changing The Resolution
SCANNER/INTERNET FAX CHANGING THE RESOLUTION The resolution setting can be selected. Select the mode and display the image settings screen. (1) Touch the tab of the mode that you wish to use. (2) Touch the [Resolution] key. ☞ IMAGE SETTINGS (page 5-53) Select the resolution.
Page 475: How To Select The Resolution
For normal text originals, 200X200dpi (200X100dpi in Internet fax mode) produces an image that is sufficiently legible. For photos and illustrations, a high resolution setting (600X600dpi, etc.) will produce a sharp image. However, a high resolution setting will result in a large file, and if the file is too large, transmission may not be possible. In this event, reduce the number of pages scanned or take other measures to decrease the file size.
Page 476 SCANNER/INTERNET FAX Set the format. ● Scanning in Mono2 (1) Select the file type. (2) Select the compression mode. Scan/File Format File Type Compression Mode TIFF None PDF/A MH (G3) Encrypt PDF MMR (G4) Color/Gray Programmed (1-99) Specified Pages per File ●...
Page 477 SCANNER/INTERNET FAX To change the number of pages per file, enter the number of pages and exit the Scan/File Format format settings. File Type Compression Ratio (1) Touch the [Specified Pages per File] TIFF checkbox so that a checkmark appears. PDF/A Medium Encrypt PDF...
Page 478: Changing The Format (Internet Fax Mode)
SCANNER/INTERNET FAX Changing the format (Internet fax mode) The file format for sending an Internet fax is normally set to [TIFF-F]. If the destination Internet fax machine does not support full mode (it only supports simple mode), follow the steps below to select [TIFF-S]. Switch to Internet fax mode and display the file format settings screen.
Page 479: Changing The Color Mode
SCANNER/INTERNET FAX CHANGING THE COLOR MODE This procedure is used to change the color mode used to scan the original when the [COLOR START] key or the [BLACK & WHITE START] key is pressed. This function cannot be used in Internet fax mode. Start key Mode Scanning method...
Page 480: Checking The Image To Be Transmitted (Preview)
SCANNER/INTERNET FAX CHECKING THE IMAGE TO BE TRANSMITTED (Preview) If you touch the [Preview] key before scanning the original, you can check the scanned image in the touch panel before sending the image. * The factory default setting is disabled. Depending on the size of the transmission data, part of the preview image may not appear in the preview screen in the touch panel.
Page 481: Preview Check Screen
SCANNER/INTERNET FAX PREVIEW CHECK SCREEN This section explains the preview check screen. Preview Sender Info Function Rev. Display Rotation Start Sending 0001 /0010 Preview image [Sender Info] key A preview of the scanned original appears. When Internet fax mode is selected, touch to display the If the image is cut off, use the scroll bars at the right and sender information for I-fax own address send.
Page 482: Special Modes
SCANNER/INTERNET FAX SPECIAL MODES This section explains special modes that can be used in scan send mode. SPECIAL MODES When the [Special Modes] key is touched in the base screen, the special modes menu screen appears. The special modes menu consists of two screens. Touch the key to switch between the two screens.
Page 483 SCANNER/INTERNET FAX Internet fax mode The keys explained below can only be used in Internet fax mode. The other keys are the same as those explained in "Scan mode, USB memory mode, Data entry mode" (page 5-71). Fax/Special Modes Internet Fax/Special Modes Program Erase Timer...
Page 484: Storing Scan Operations (Programs)
SCANNER/INTERNET FAX STORING SCAN OPERATIONS (Programs) A destination, original settings, and functions can be stored in a program. When you wish to use those settings to send an image, they can be retrieved with ease. For example, suppose 8-1/2" x 11" (A4) size documents are scanned into a file and sent to each branch office once a month. (1) The same documents are sent to each branch office (5) Smudges on the edges of the documents are erased before transmission When a job program is not stored...
Page 485 SCANNER/INTERNET FAX Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the [Program] key. ☞ SPECIAL MODES (page 5-71) Retrieve the stored program. (1) Touch the desired program key. Program (2) Touch the [OK] key. Program 1 Program 2 Program 3 Program 4...
Page 486: Erasing Peripheral Shadows On The Image (Erase)
SCANNER/INTERNET FAX ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase) The erase function is used to erase shadows on images produced when scanning thick originals or books. (This function erases the parts of the image where shadows tend to form. The function does not detect shadows and erase only the shadows.) Scanning a thick book Not using the erase Using the erase...
Page 487 SCANNER/INTERNET FAX Select the erase settings. (1) Touch the desired erase mode. Scan/Special Modes Select one of the 4 erase modes. Erase Cancel Touch the [Side Erase] key to open the following screen. Erase Erase Edge Erase Edge Side Erase Side Erase Cancel Cancel...
Page 488: Sending An Image At A Specified Time (Timer Transmission)
SCANNER/INTERNET FAX SENDING AN IMAGE AT A SPECIFIED TIME (Timer Transmission) This function lets you specify a time at which a transmission or broadcast transmission will automatically take place. Transmission begins automatically at the specified time. Set a transmission to At 20:00, the transmission take place at 20:00 begins automatically...
Page 489 SCANNER/INTERNET FAX Set the time with the keys. (1) Specify the day. Scan/Special Modes If you do not wish to specify a day, select [---]. In this Cancel Timer case, transmission will begin when the time specified in (2) arrives. Time Day of the Week (2) Specify the time (hour, minute)
Page 490 SCANNER/INTERNET FAX SCANNING MANY ORIGINALS AT ONCE (Job Build) This function lets you separate an original consisting of numerous pages into sets, scan each set using the automatic document feeder, and transmit the pages in a single transmission. Use this function when the number of originals that you wish to scan exceeds the maximum number of sheets that can be inserted in the automatic document feeder at once.
Page 491 SCANNER/INTERNET FAX Select job build mode. (1) Touch the [Job Build] key so that it is Scan/Special Modes highlighted. Program Erase Timer (2) Touch the [OK] key. Blank Page Mixed Size Build Original Skip Business Original Card Shot Card Scan Count Suppress Quick File...
Page 492 SCANNER/INTERNET FAX SCANNING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original) This feature lets you scan originals of different sizes at the same time; for example, 5-1/2" x 8-1/2" (A5) size originals mixed together with 8-1/2" x 11" (A4) size originals. When scanning the originals, the machine automatically detects the size of each original.
Page 493 SCANNER/INTERNET FAX Select the mixed size original setting. (1) Touch the [Mixed Size Original] key so that Scan/Special Modes it is highlighted. Program Erase Timer (2) Touch the [OK] key. Mixed Size Blank Page Build Original Skip Business Original Card Shot Card Scan Count Suppress...
Page 494: Checking The Number Of Scanned Original Sheets Before
SCANNER/INTERNET FAX CHECKING THE NUMBER OF SCANNED ORIGINAL SHEETS BEFORE TRANSMISSION (Original Count) The number of scanned original sheets can be counted and displayed before transmission. Checking the number of scanned original sheets before transmission helps prevent transmission mistakes. • This function cannot be used in USB memory mode. •...
Page 495 SCANNER/INTERNET FAX Press the [COLOR START] key or the [BLACK & WHITE START] key. Scanning begins. To cancel scanning... Press the [STOP] key ( ) to cancel the operation. All scanned data will be cleared. When scanning ends, check the number of original sheets scanned and touch the [OK] key.
Page 496: Whitening Faint Colors In The Image (Suppress Background)
SCANNER/INTERNET FAX WHITENING FAINT COLORS IN THE IMAGE (Suppress Background) This feature is used to suppress light background areas. Level [+] The lightness level at which suppression takes place can be adjusted. Level [-] • This function cannot be used in Internet fax mode. •...
Page 497 SCANNER/INTERNET FAX Select the suppress background setting. (1) Adjust the background suppression level. Scan/Special Modes Touch the [+] key to suppress only faint background. Cancel Suppress Background Touch the [-] key to suppress faint to dark background. Light areas of the original may be suppressed as background. (2) Touch the [OK] key.
Page 498: Eliminating Blank Pages From A
SCANNER/INTERNET FAX ELIMINATING BLANK PAGES FROM A TRANSMISSION (Blank Page Skip) When blank pages are included in originals scanned using the automatic document feeder, the blank pages can be detected and automatically eliminated from transmission. Blank pages are not sent Blank pages Send •...
Page 499 SCANNER/INTERNET FAX Set blank page skipping. (1) Select the type of blank page to be skipped. Scan/Special Modes Select from two types. Cancel Blank Page Skip To include blank pages on which the content on the opposite side shows through, touch [Skip Blank and Back Shadow].
Page 500: Scanning Both Sides Of A Card Ontoa Single Page (Card Shot)
SCANNER/INTERNET FAX SCANNING BOTH SIDES OF A CARD ONTO A SINGLE PAGE (Card Shot) This function lets you send the front and reverse sides of a card as a single page, without the need to send each side separately. Scanned image Originals Transmission Front...
Page 501 SCANNER/INTERNET FAX Specify the original size. (B) (2) (1) Enter the original size. Scan/Special Modes • Touch the [X] key and enter the horizontal dimension Cancel Card Shot (X) of the original with the keys. • Touch the [Y] key and enter the vertical dimension (Y) (1 8 1/2) Fit to of the original with the...
Page 502 SCANNER/INTERNET FAX Touch the [Read-End] key. Place next original. (Pg.No.x) Press [Start]. When finished, press [Read-End]. Configure Read-End If you will continue by scanning the front of the card, you can touch the [Configure] key to change the exposure, resolution, scan size, and send size. The ratio cannot be specified and "Rotation Sending Setting"...
Page 503: Scanning Business Cards (Business Card Scan)
SCANNER/INTERNET FAX SCANNING BUSINESS CARDS (Business Card Scan) Multiple business cards can be scanned and transmitted at once. Load the business cards. Specify the destination. ☞ ENTERING DESTINATIONS (page 5-18) Select the special modes. (1) Touch the tab of the mode that you wish to use. (2) Touch the [Special Modes] key.
Page 504: Changing The Print Settings For The Transaction Report (Transaction Report)
SCANNER/INTERNET FAX CHANGING THE PRINT SETTINGS FOR THE TRANSACTION REPORT (Transaction Report) A transaction report is automatically printed out to alert you when an Internet fax transmission fails or when a broadcast transmission is performed. The transaction report contains a description of the transmission (date, start time, name of other party, time required, number of pages, result, etc.).
Page 505 SCANNER/INTERNET FAX Press the [BLACK & WHITE START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. When scanning finishes, place the next original and press the [BLACK &...
Page 506: Checking The Status Of Transmission/Reception Jobs
SCANNER/INTERNET FAX CHECKING THE STATUS OF TRANSMISSION/RECEPTION JOBS This section explains how to check the status of reserved transmission jobs and received Internet faxes. JOB STATUS SCREEN The job status screen is displayed when the [JOB STATUS] key on the operation panel is pressed. The job status screen shows the status of jobs by mode.
Page 507: Job Queue Screen And Completed Job Screen
SCANNER/INTERNET FAX JOB QUEUE SCREEN AND COMPLETED JOB SCREEN The job status screen consists of two screens: the job queue screen that shows reserved jobs and the job currently in progress, and the completed jobs screen. To switch between the two screens, touch the job status screen selector key ((2) below).
Page 508 SCANNER/INTERNET FAX Job key display The following information is shown in the job queue keys and completed job keys that appear in the job status screen. Direct SMTP information is also included in Internet fax transmission/reception information. AAA AAA 10:22 04/01 000/004 Waiting (1) (2) Displays the number (position) of the job in the job queue.
Page 509 SCANNER/INTERNET FAX • Completed job Display Status "Send OK" Transmission was completed. "In Memory" An Internet fax has been received but has not yet been printed. "Received" Printed received fax data. "Forward OK" A received Internet fax has been forwarded. "Stopped"...
Page 510: Operation When A Job In The Job Queue Is Completed
SCANNER/INTERNET FAX OPERATION WHEN A JOB IN THE JOB QUEUE IS COMPLETED When a normal transmission job is completed, it moves to the completed jobs screen and "Send OK" appears in the status column. Received Internet faxes, timer transmission jobs, and forwarding jobs are handled in the job status screen as explained below.
Page 511: Checking Completed Jobs
SCANNER/INTERNET FAX CHECKING COMPLETED JOBS You can check a list of the destinations, the destinations for which transmission failed, and other detailed information on completed jobs that used document filing function, broadcast transmission jobs, and received Internet fax forwarding jobs. Touch the key of the job for which you wish to display information in the completed jobs screen and touch the [Detail] key.
Page 512: Stopping A Scan Job Being Transmitted Or Waiting To Be Transmitted
SCANNER/INTERNET FAX STOPPING A SCAN JOB BEING TRANSMITTED OR WAITING TO BE TRANSMITTED Follow the steps below to stop a job that is being transmitted or is waiting to be transmitted. Press the [JOB STATUS] key ( Select the job that you wish to stop. (1) Touch the mode tab of the job to be Print Job Internet Fax...
Page 513: Giving Priority To A Scan Transmission Job
SCANNER/INTERNET FAX GIVING PRIORITY TO A SCAN TRANSMISSION JOB When multiple jobs are waiting to be transmitted, the jobs are normally transmitted in the order they were reserved. If you need to give priority to a job and send it ahead of the other jobs, follow the steps below. Touch the [JOB STATUS] key ( Select the job to which you wish to give priority.
Page 514: Checking The Internet Fax Activity
SCANNER/INTERNET FAX CHECKING THE INTERNET FAX ACTIVITY LOG (Image Sending Activity Report) IMAGE SENDING ACTIVITY REPORT You can have the machine print a log of recent image sending activity (date, name of other party, time required, result, etc.). The Image Sending Activity Report contains useful information such as the types of errors that occurred. The most recent 200 transactions are included in the report.
Page 515: Internet Fax Reception Functions
SCANNER/INTERNET FAX INTERNET FAX RECEPTION FUNCTIONS This section explains the basic procedures for receiving Internet faxes. RECEIVING AN INTERNET FAX The Internet fax function periodically* connects to the mail server (POP3 server) and checks whether or not Internet faxes have been received. When faxes have been received, the faxes are automatically retrieved and printed. * The default setting is once every 5 minutes.
Page 516: Manually Receiving Internet Faxes
SCANNER/INTERNET FAX MANUALLY RECEIVING INTERNET FAXES If the interval for checking for received faxes is somewhat long and you wish to check immediately, you can manually initiate reception. Touch the [I-Fax Manual Reception] key to connect to the mail server and retrieve received faxes. Scan Internet Fax USB Mem.
Page 517: Printing A Password-Protected Fax (Hold Setting For Received Data Print)
SCANNER/INTERNET FAX PRINTING A PASSWORD-PROTECTED FAX (Hold Setting For Received Data Print) "Hold Setting for Received Data Print" in the system settings (administrator) can be enabled to have faxes received to memory without being printed. To print the faxes, a password must be entered. When this function is enabled, a password entry screen appears in the touch panel when received Internet faxes are retrieved.
Page 518: Checking The Image Before Printing
SCANNER/INTERNET FAX CHECKING THE IMAGE BEFORE PRINTING When "Received Data Image Check Setting" is enabled* in the system settings (administrator), you can check a received image in the touch panel before printing it out. When this function is enabled, follow the steps below to print a received image.
Page 519: Checking The Image Before Forwarding
SCANNER/INTERNET FAX CHECKING THE IMAGE BEFORE FORWARDING When "Received Data Image Check Setting" is enabled in the system settings (administrator), you can select the received data from the list and forward it to the addresses recorded in the address book. When this function is enabled, follow the steps below to forward the received image.
Page 520 SCANNER/INTERNET FAX Start forward Touch the [Start forward.] key. AAA AAA BBB BBB Address Review CCC CCC DDD DDD EEE EEE FFF FFF GGG GGG HHH HHH III III JJJ JJJ Freq. ABCD EFGH IJKL MNOP QRSTU VWXYZ etc. Sort Address Start forward.
Page 521: Image Check Screen
SCANNER/INTERNET FAX IMAGE CHECK SCREEN This section explains the image check screen. Back Image Check AAA AAA 04/04/2013 10:28 1 / 3 Display Rotation Print 0001 0010 Information display "Display Rotation" key This shows information on the displayed image. This rotates the image right or left by 90 degrees. The rotation applies to all pages in the file, not just the Preview image displayed page.
Page 522: Forwarding Received Internet Faxes To An Address (Inbound Routing Settings)
SCANNER/INTERNET FAX FORWARDING RECEIVED INTERNET FAXES TO AN ADDRESS (Inbound Routing Settings) Received Internet faxes can be automatically forwarded to a facsimile internet fax, e-mail address, file server address, desktop address, or network folder address. When this function is enabled, you can also have received Internet faxes forwarded without printing them.
Page 523 SCANNER/INTERNET FAX Storing sender addresses. If you wish to have only faxes from specified addresses forwarded, store the desired sender addresses. Send addresses stored here can be selected from a list when you store a forwarding table. (1) Click [Sender Number/Address Registration] in the [Inbound Routing Settings] menu in the Web page.
Page 524 SCANNER/INTERNET FAX Store a forwarding table. Follow the steps below to store a forwarding table that combines a specified sender and forwarding address. (1) Click [Inbound Routing Settings] in the Web page menu and click the [Add] button. (2) Enter a "Table Name". (3) Select the line used for reception.
Page 525 SCANNER/INTERNET FAX Specifying forwarding tables to be used. To use the inbound routing function, enable the forwarding tables that you wish to use from among the stored tables. (1) Click [Inbound Routing Settings] in the Web page menu. (2) Select [Always Forward] or [Forward on Selected Day &...
Page 526: Scanning From A Computer
SCANNER/INTERNET FAX SCANNING FROM A COMPUTER (PC Scan Mode) BASIC SCANNING PROCEDURE You can install the scanner driver on your computer from the CD-ROM that accompanies the machine, and use a TWAIN* compliant application to scan an image using your computer. Scanning from your computer is most useful for scanning a single original such as a photo, particularly when you want to adjust scan settings as you scan.
Page 527 [Select Scanner] from the [File] menu. Select the scanner driver of the machine. (1) Select [SHARP MFP TWAIN V]. (2) Click the [Select] button. Select [Acquire Image] from the [File] menu. The scanner driver opens.
Page 528: Preview The Image
SCANNER/INTERNET FAX Preview the image. (1) Select the location where the original is placed. "Scanning Position" menu: • If the original is a one-sided original and is placed in the document feeder tray, select [SPF(Simplex)]. • If the original is a 2-sided original and is placed in the document feeder tray, select [SPF(Duplex - Book)] or [SPF(Duplex - Tablet)] depending on whether the original is a book-style or tablet-style original.
Page 529: Select Scanning Settings While Viewing The Image
SCANNER/INTERNET FAX Select scanning settings while viewing the image. [Rotate] button: Each time this button is clicked, the preview image rotates 90 degrees. This lets you change the orientation of the image without picking up and placing the original again. The image file will be created using the orientation that appears in the preview window.
Page 530 SCANNER/INTERNET FAX [At the machine] Touch the [Exit] key in the touch panel. This machine is in the PC scan mode. Do not remove the original. Scanner IP address:250.160.102.106 Exit Touch the [Yes] key. PC scan in progress. Finish PC scan mode? 5-119 Contents...
Page 531: Metadata Delivery
SCANNER/INTERNET FAX METADATA DELIVERY This section explains metadata delivery, which can be used when the application integration module is installed. METADATA DELIVERY (Data Entry) When the application integration module kit is installed and an image file is generated for a scan send transmission, metadata (data indicating the attributes of the image file and how it is to be processed) can be generated based on pre-stored information and transmitted as a separate file.
Page 532: Preparations For Metadata Transmission
SCANNER/INTERNET FAX PREPARATIONS FOR METADATA TRANSMISSION SETTINGS REQUIRED IN THE WEB PAGES All settings related to metadata are configured in the Web pages. (Administrator rights are required.) To configure metadata settings, click [Application Settings] and then [Metadata Settings] in the Web page menu. When configuring settings, be sure to enable metadata transmission.
Page 533: Transmitting Metadata
SCANNER/INTERNET FAX TRANSMITTING METADATA Follow the steps below to select a metadata set, enter each item, and perform metadata transmission. Switch to data entry mode and display the metadata set screen. Scan Internet Fax Data Entry Address Book (1) Touch the [Data Entry] tab. Original Scan: Auto...
Page 534 SCANNER/INTERNET FAX Enter the selected metadata item. (1) Touch the key of the value that you wish to Data Entry enter. Cancel User ID • When the entry values of the metadata item are in the Direct Entry form of selections, the selections are shown as keys. Value 1 Value 2 When a value is editable, you can touch the [Direct...
Page 535: Metadata Fields
SCANNER/INTERNET FAX METADATA FIELDS The following three types of metadata are included in the XML file that is transmitted. • Data automatically generated by the machine: These data are always included in the XML file and are automatically stored on your computer. •...
Page 536 CHAPTER 6 DOCUMENT FILING This chapter provides detailed explanations of the procedures for using the document filing function. The document filing function allows you to save the document data of a copy or fax job, or the data of a print job, as a file on the machine's hard drive.
Page 537: Overview
DOCUMENT FILING DOCUMENT FILING This section provides information that you should know before using the document filing function, including an overview of document filing, the features and functions of document filing, and points to keep in mind when using document filing. OVERVIEW The document filing function allows you to save the document image of a copy or image send job, or the data of a print job, as a file on the machine's hard drive.
Page 538: Uses Of Document Filing
DOCUMENT FILING USES OF DOCUMENT FILING Quickly using a file Example: You prepared handouts consisting of numerous pages for a meeting, however, another handout is needed for a newly added participant. The handout was not saved using document filing The handout was saved using document filing Ratio, color mode, and special mode settings must be reselected.
Page 539: Before Using Document Filing
DOCUMENT FILING BEFORE USING DOCUMENT FILING This section provides information that you should know before using the document filing function. Folders Three types of folders are used to store files by document filing. Folders on the hard drive Main Folder Quick File Folder Custom Folder...
Page 540 DOCUMENT FILING Approximate number of pages and files that can be stored by document filing Combined total number of pages and total number of files that can be stored in custom folders and in the Main folder Examples of original types Number of pages* Number of files Full color...
Page 541: Automatic Deletion Of Files
DOCUMENT FILING Automatic deletion of files You can have document filing data in specified folders automatically deleted at regular intervals by specifying the folders and the time. Periodic deletion of files stored in the machine helps to prevent the leaking of sensitive information and frees space on the hard drive.
Page 542: Important Points When Using Document Filing
Do not store sensitive documents or documents that you do not want to be used by others. • Except in cases provided for by law, SHARP Corporation bears no responsibility for any damages that result from the leaking of sensitive information due to manipulation by a third party of any data saved using the Quick File function or File function, or incorrect operation of the Quick File function or File function by the operator that saves the data.
Page 543: Using Document Filing In Each Mode
DOCUMENT FILING USING DOCUMENT FILING IN EACH MODE In copy or image send mode, the original can be saved as a file on the hard drive at the same time it is copied or transmitted. In addition, Scan to HDD can be used to save the scanned data of an original to the hard drive without copying or transmitting the data.
Page 544 DOCUMENT FILING Scan to HDD mode The scanned original is saved as an image file. Neither printing nor transmission are performed when Scan to HDD is used. (1) Touch the [DOCUMENT FILING] key. (2) Touch the [Scan to HDD] tab. DOCUMENT COPY IMAGE SEND...
Page 545: Base Screen Of Document Filing
DOCUMENT FILING BASE SCREEN OF DOCUMENT FILING MODE Touch the [DOCUMENT FILING] key in the touch panel to open the base screen of document filing mode. Files stored on the hard drive in the machine can be retrieved from this screen. When user authentication is used and My Folder is configured, the file selection screen of My Folder will appear.
Page 546: Saving Files With Document Filing
DOCUMENT FILING SAVING FILES WITH DOCUMENT FILING This chapter explains how to save an original as an image file using the Quick File, File, and Scan to HDD functions of document filing mode. SAVING A FILE WITH "Quick File" When copying, printing or transmitting a document in copy mode, print mode, or image send mode (excluding USB memory scan mode), "Quick File"...
Page 547 DOCUMENT FILING Select copy settings and then press the [COLOR START] key or the [BLACK & WHITE START] key. • Copying begins and the scanned document image is saved to the hard drive. The selected copy settings are also saved. •...
Page 548: Saving A File With "File
DOCUMENT FILING SAVING A FILE WITH "File" When copying, printing or transmitting a document in copy mode, print mode, or image send mode (excluding USB memory scan mode), "File" can be selected to save an image of the document to the Main folder or a previously created custom folder.
Page 549 DOCUMENT FILING Select copy settings and then press the [COLOR START] key or the [BLACK & WHITE START] key. • Copying begins and the scanned document image is saved to the hard drive. The selected copy settings are also saved. •...
Page 550: File Information
DOCUMENT FILING FILE INFORMATION This section explains the settings that are configured in step 3 of "SAVING A FILE WITH "File"" (page 6-13). Specifying a user name, file name, folder, and confidential setting makes it easier to manage and search for a file. In addition, when confidential is selected and a password is established, other people will not be able to view the file without permission.
Page 551 DOCUMENT FILING Assigning a file name A file name can be assigned to the file. Touch the [File Name] key. File Information Cancel A text entry screen will appear. Enter the file name and touch the [OK] key. Confidential A maximum of 30 characters can be entered. Password User Name User Unknown...
Page 552: Storing A File As A Confidential File
DOCUMENT FILING Storing a file as a confidential file A password can be set for the file to prevent others from viewing it. Set a password (5 to 8 digits) with the numeric keys. Enable the confidential property. (1) Select the [Confidential] checkbox so that a File Information Cancel checkmark...
Page 553: Saving A Document File Only
DOCUMENT FILING SAVING A DOCUMENT FILE ONLY (Scan to HDD) Scan to HDD is used to store a scanned document in the Main folder or a custom folder. Neither printing nor transmission are performed. "Scan to HDD" SCREEN The following screen appears when the [Scan to HDD] tab is touched in document filing mode. Touch the keys below to select Scan to HDD settings.
Page 554 DOCUMENT FILING [Original] key When the [Original] key is touched, the following screen appears. This screen is used to change the original size and select scanning settings for 2-sided originals. Scan to HDD/Original Scan Size Send Size 100% 8½x11 Auto Original Image Orientation 2-Sided...
Page 555 DOCUMENT FILING [Color Mode] key Touch the [Color Mode] key to open the color mode setting screen for Scan to HDD. Scan to HDD/Color Mode Color Mode Full Color Auto Color Mode 2 Color B/W Mode Mono2 Grayscale The following settings can be selected for the scanning color when the [COLOR START] key or the [BLACK & WHITE START] key is pressed.
Page 556: Special Modes Screen For Scan To Hdd
DOCUMENT FILING Special modes screen for Scan to HDD When the [Special Modes] key is touched, the following screen appears. For more information on each setting, see "SPECIAL MODES" (page 5-71) in "5. SCANNER / INTERNET FAX". Scan to HDD/Special Modes Erase Card Shot Build...
Page 557 DOCUMENT FILING Checking the image before storing it (Preview) If you touch the [Preview] key and then start Scan to HDD, the screen below appears. Before the scanned data is stored, you can check a preview of the scanned image in this screen and return to the Scan to HDD settings screen to change settings Reset Preview...
Page 558: Performing "Scan To Hdd
DOCUMENT FILING PERFORMING "Scan to HDD" Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Switch to document filing mode and select Scan to HDD settings. DOCUMENT COPY IMAGE SEND FILING (1) Touch the [DOCUMENT FILING] key.
Page 559: Using Stored Files
DOCUMENT FILING USING STORED FILES This section explains how to retrieve a file stored by document filing and print or transmit the file. SEQUENCE FOR USING A STORED FILE This section explains the basic procedure for retrieving and using a stored file. The screens and procedures differ depending on whether or not user authentication is enabled.
Page 560 DOCUMENT FILING Select the file that you wish to retrieve. • Select the folder in the folder selection screen. File Retrieve Scan to HDD HDD Status Ex Data Access When the folder is selected, the files in the folder will Search Back Main Folder...
Page 561: Folder And File Selection Screens
DOCUMENT FILING FOLDER AND FILE SELECTION SCREENS To use a file stored by document filing, the folder and file must be selected. The folder selection screen and file selection screen are explained below. FOLDER SELECTION SCREEN Two different screens appear depending on whether or not user authentication is enabled on the machine. When user authentication is not enabled When user authentication is enabled Search...
Page 562: File Selection Screen
DOCUMENT FILING FILE SELECTION SCREEN The file selection screen of the Quick File folder, Main folder, and custom folders is explained below. The file selection screen can be displayed in "List screen" format or "Thumbnail screen" format. (To select the format, see "(5) [Switch Display] key"...
Page 563 DOCUMENT FILING [Multi-File Print] key Touch this to select multiple files in a folder for printing. ☞ MULTI-FILE PRINTING (page 6-33) Sort Order / Display Items This can be used in the thumbnail screen. The order of display of the file thumbnails can be changed in "Sort Order".
Page 564: Selecting A File
DOCUMENT FILING SELECTING A FILE This section explains how to select a file to be used. Select the folder that contains the file you wish to use. DOCUMENT COPY IMAGE SEND FILING (1) Touch the [DOCUMENT FILING] key. The folder selection screen will appear. If a different tab File Retrieve Scan to HDD HDD Status...
Page 565: Job Settings Screen
DOCUMENT FILING JOB SETTINGS SCREEN When a file key is touched, the following screen appears. Touch the key of the operation that you wish to perform and select settings. File Retrieve Scan to HDD HDD Status Ex Data Access Cancel Job Settings Search Back...
Page 566: Printing A Stored File
DOCUMENT FILING PRINTING A STORED FILE A file stored using document filing can be retrieved and printed when needed. The settings used when the file was stored are also stored, and thus the file can be printed again using those settings. The file can also be modified before printing by changing the print settings.
Page 567: Print Settings Screen
DOCUMENT FILING PRINT SETTINGS SCREEN Cancel Job Settings / Print file-01 Name 1 8½x11 F. Color Paper Select Number of Prints Auto Print and Delete the Data (1 999) Output Print and Save the Data 2-Sided Special Modes B/W Print [Paper Select] key Use this key to set the paper size.
Page 568: Multi-File Printing
DOCUMENT FILING MULTI-FILE PRINTING Multiple files in a folder can be selected for printing. Touch the [Multi-File Print] key. Search Back Main Folder To select files of a particular job type, touch the [Switch File Name User Name Date Display] key, select the job type from the screen that appears, file-01 Name 1 04/04/2013...
Page 569: Printing A Selected File
DOCUMENT FILING Printing a selected file. (2) (3) The number of selected files appears in the number of selected Cancel Job Settings / Print files display. Number of Selected Files: 5 If you wish to use the number of copies that was stored with the file, go to step (3).
Page 570: Batch Printing
DOCUMENT FILING Batch printing All files in a folder that have the same user name and password can be printed at once. When the [Multi-File Print] key is touched, it changes into the [Batch Print] key. Touch the [Batch Print] key. Select All Back Multi-File Print...
Page 571 DOCUMENT FILING If a password has been established, Cancel Batch Print touch the [Password] key. User 1/ All Files Enter the password with the numeric keys (5 to 8 digits) and User Name Name 1 touch the [OK] key. Only files that have the same password will Password be selected.
Page 572: Sending A Stored File
DOCUMENT FILING SENDING A STORED FILE A file stored by document filing can be retrieved and transmitted whenever needed. The settings used when the file was stored are also stored, and thus the file can be transmitted using those settings. If needed, you can also change the transmission settings to modify the retrieved file.
Page 573: Send Settings Screen
DOCUMENT FILING SEND SETTINGS SCREEN The keys that appear in the send settings are explained below. For more information on each of the settings, see "BASE SCREEN OF FAX MODE" (page 4-7) in "4. FACSIMILE" and "BASE SCREEN" (page 5-9) in "5. SCANNER / INTERNET FAX".
Page 574: Properties Of Stored Files
DOCUMENT FILING PROPERTIES OF STORED FILES FILE PROPERTIES A protect setting can be selected for files saved with the document filing function. This prevents a file from being moved, or automatically or manually deleted. Three properties are available for saved files: [Sharing], [Protect], and [Confidential]. When saved with the [Sharing] property, a file is not protected.
Page 575 DOCUMENT FILING Restrictions on changing the property • A file that is set to "Sharing" can be changed to "Protect" or "Confidential". However, a "Sharing" file that is saved in the Quick File folder can only be changed to "Protect". •...
Page 576: Moving A Stored File
DOCUMENT FILING MOVING A STORED FILE Use this procedure to change the location of a file (move a file to a different folder). After selecting the desired file, follow the steps below. ☞ SELECTING A FILE (page 6-29) Touch the [Move] key. Cancel Job Settings file-01...
Page 577 DOCUMENT FILING Touch the [Move] key. Cancel Job Settings / Move file-01 Name 1 8½x11 F. Color Select the folder the file is moved to. File Name file-01 Move to: User 2 Move A file whose property is "Protect" cannot be moved. To move a protected file, change its property to "Sharing" or "Confidential".
Page 578: Deleting A Stored File
DOCUMENT FILING DELETING A STORED FILE Stored files that are no longer needed can be deleted. Select the file that you wish to delete and touch the [Delete] key. ☞ SELECTING A FILE (page 6-29) Touch the [Delete] key. Cancel Job Settings file-01 Name 1...
Page 579: Checking An Image Of A Stored File
DOCUMENT FILING CHECKING AN IMAGE OF A STORED FILE You can check an image of a file stored using document filing. Select the desired file and touch the [Image Check] key. ☞ SELECTING A FILE (page 6-29) Depending on the size of the image, part of the image may be clipped off in the image check screen on the touch panel. Touch the [Image Check] key.
Page 580: Image Check Screen
DOCUMENT FILING IMAGE CHECK SCREEN This section explains the image check screen. Image Check Back 8½x11 file-01 Name 1 F. Color Display Rotation Detail 0001 0010 Information display "Display Rotation" key This shows information on the displayed image. This rotates the image right or left by 90 degrees. The rotation applies to all pages in the file, not just the Preview image displayed page.
Page 581: Retrieving And Using A File From The Job Status Screen
DOCUMENT FILING RETRIEVING AND USING A FILE FROM THE JOB STATUS SCREEN Files stored using File and Quick File appear as keys in the job status complete screen. This is convenient when you need to quickly print the saved data of a copy job or quickly send a saved fax to another destination.
Page 582: Searching For A Stored File
DOCUMENT FILING SEARCHING FOR A STORED FILE When there are many stored files, it may take time to find a file. The search function of document filing mode can be used to find a file quickly. This section explains how to search for a file or folder on the machine's hard drive. Searching is possible even when you only know part of the file name or folder name.
Page 583 DOCUMENT FILING Using the user name to search (B)(D) There are four ways to select the user name: Cancel User Name (A) Touch the key of the user name. Name 1 Name 2 The touched user name is highlighted. Name 3 Name 4 If you accidentally select the wrong user name, touch the Default User...
Page 584 DOCUMENT FILING Touch the [Start Search] key. Search Cancel Start Search The search results will appear in a screen similar to the following screen. A list of the files that match your search User Name Name 1 criteria will appear. Select the desired file from the list. The job File or Folder Name file-01 settings screen will appear.
Page 585 DOCUMENT FILING Searching within a folder You can specify a folder to restrict the search range to that folder. To search within a specified folder, follow the steps below. Open the folder that you wish to search. (1) Touch the [DOCUMENT FILING] key. DOCUMENT COPY IMAGE SEND...
Page 586 DOCUMENT FILING Using the user name to search (B)(D) There are four ways to select the user name: Cancel User Name (A) Touch the key of the user name. Name 1 Name 2 The touched user name is highlighted. Name 3 Name 4 If you accidentally select the wrong user name, touch the Default User...
Page 587 DOCUMENT FILING Start searching. (1) Touch the [Search within Current Folder] Cancel Start Search Search checkbox so that it is selected To search only files that are in the current folder, select User Name Name 1 the [Search within Current Folder] checkbox File or Folder Name file-01 Use this method to search for a file in a confidential folder.
Page 588 CHAPTER 7 SYSTEM SETTINGS This chapter explains the system settings, which are used to configure a variety of parameters to suit the aims and needs of your workplace. The current selections that have been made for the settings can be viewed or printed out. To quickly check where a setting is located in the system settings menu, see "SYSTEM SETTINGS MENU"...
Page 589 SYSTEM SETTINGS Copy Function Settings ....7-70 • Initial Status Settings ....7-70 •...
Page 590: System Settings
SYSTEM SETTINGS SYSTEM SETTINGS System Settings The system settings are used to configure a variety of parameters to suit the aims and needs of your workplace. The system settings are also used to display or print out the current settings and status of the machine. The system settings allow you to make the machine easier to use.
Page 591: Common Operation Methods
SYSTEM SETTINGS Common Operation Methods This section explains special operation methods that are common to all system settings. Be sure to read this section, as the information is omitted in the explanations of some of the individual settings. Example: Address book screen System Settings Address Book Back...
Page 592: System Settings (General)
SYSTEM SETTINGS SYSTEM SETTINGS (GENERAL) This section describes the system settings that can be configured by general users of the machine. Accessing the System Settings (General) Make sure that the machine is in the standby state and then press the [SYSTEM SETTINGS] key on the operation panel.
Page 593: System Settings (General) List
SYSTEM SETTINGS System Settings (General) List When the system settings are accessed with general rights, the following items appear. For items that can only be accessed with administrator rights, see "System Settings (Administrator) List" (page 7-30). • Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings. •...
Page 594 SYSTEM SETTINGS Paper Tray Settings Item Factory default setting Page 7-13 ■ Paper Tray Settings ● Tray Settings Tray 1 Plain, 8-1/2" x 11" (A4) 7-13 Tray 2* Plain, 8-1/2" x 11" (A4) Bypass Plain, 8-1/2" x 11" (A4) ● Paper Type Registration –...
Page 595 SYSTEM SETTINGS Printer Condition Settings Item Factory default setting Page 7-23 ■ Printer Condition Settings ● Printer Default Settings Copies Orientation Portrait Default Paper Size 8-1/2" x 11" Default Paper Type Plain Paper Initial Resolution Setting 600dpi (High Quality) Disable Blank Page Print Disabled Line Thickness 7-23...
Page 596 SYSTEM SETTINGS Document Filing Control Item Factory default setting Page 7-25 ■ Document Filing Control USB-Device Check Item Factory default setting Page – 7-26 ■ USB-Device Check User Control Item Factory default setting Page 7-26 ■ User Control* ● Modify User Information –...
Page 597: Total Count
SYSTEM SETTINGS Total Count This function shows the page count in each mode. Touch the [Total Count] key. Job Count This displays or prints out the counts of all jobs. • Each sheet of paper used for automatic two-sided copying is counted as two pages. •...
Page 598: Default Settings
SYSTEM SETTINGS Default Settings The default settings for operation of the machine can be configured. Touch the [Default Settings] key and select the settings. Clock Adjust Use this to set the date and time in the machine's built-in clock. Set the time. Item Settings If your region is ahead of GMT (Greenwich Mean Time), select [+].
Page 599: Keyboard Select
SYSTEM SETTINGS Keyboard Select The layout of the keyboard that appears in text entry screens can be changed. The keyboard layouts that can be selected are shown below. English (US) English (UK) Japanese French German Swedish Norwegian Finnish Danish Russian Greek Turkish List Print (User)
Page 600: Paper Tray Settings
SYSTEM SETTINGS Paper Tray Settings Paper tray and paper type settings are explained in this section. Touch the [Paper Tray Settings] key to configure the settings. Tray Settings These settings specify the paper type, paper size, and functions allowed for each paper tray. When the [Tray Settings] key is touched, a list appears showing the trays and the current settings.
Page 601 SYSTEM SETTINGS Tray Settings Paper Tray Paper Type Size Tray 1 Plain, Pre-Printed, 8-1/2" x 11", 7-1/4" x 10-1/2", 5-1/2" x 8-1/2", Recycled, Letter Head, A4, A5, B5, 16K Tray 2 Pre-Punched, Color, (When a paper feed User Type unit is installed.) In addition to the paper 8-1/2"...
Page 602: Paper Type Registration
SYSTEM SETTINGS Paper Type Registration Store a paper type when the desired paper type does not appear as a selection or when you wish to create a new set of paper properties. Up to 7 paper types can be stored. Item Description Store any name.
Page 603: Address Control
SYSTEM SETTINGS Address Control Address Control is used to store, edit, and delete one-touch keys, group keys, program keys, and custom indexes. Touch the [Address Control] key to configure the settings. • The settings that can be selected vary depending on the peripheral devices installed. •...
Page 604 SYSTEM SETTINGS Settings Item Description Items stored in all modes Select the type of address to be stored in the address book. • E-mail: Store an e-mail address in a one-touch key. • Internet Fax: Store an Internet fax address in a one-touch key. Address Type •...
Page 605 SYSTEM SETTINGS Item Description Items appearing when a Direct SMTP address is stored Use these three settings to set an address for Direct SMTP transmission. In many cases, transmission is possible using method (1). A maximum of 64 characters each can be entered in the "Direct SMTP Address" and "Hostname or IP Address"...
Page 606 SYSTEM SETTINGS Touch the [Address Book] key. Touch the [Add New] key. AAA AAA BBB BBB CCC CCC DDD DDD EEE EEE FFF FFF Select "Group" from the [Address Type] list. Set the [Group Name], [Initial], and [Key Name] settings. (Other settings can be adjusted as necessary.) (1-1000) Use the scroll bar to display the lower...
Page 607: Custom Index
SYSTEM SETTINGS Touch the one-touch keys that you want to add to the group. (Three keys are AAA AAA BBB BBB added in this example.) CCC CCC DDD DDD EEE EEE FFF FFF GGG GGG Touch the [OK] key. AAA AAA BBB BBB CCC CCC DDD DDD...
Page 608: Program
SYSTEM SETTINGS Program If you frequently use the same settings and/or functions to transmit to the same destination or destinations, the settings and destinations can be stored in a program. This allows the settings and destinations to be selected by simply selecting the program.
Page 609: Fax Data Receive/Forward
SYSTEM SETTINGS Fax Data Receive/Forward This section explains settings for reception and forwarding. Touch the [Fax Data Receive/Forward] key and configure the settings. For explanations of settings related to the fax function, see "SYSTEM SETTINGS FOR FAX" (page 7-103). I-Fax Settings These settings can be configured when the Internet fax expansion kit is installed.
Page 610: Printer Condition Settings
SYSTEM SETTINGS Printer Condition Settings The Printer Condition Settings are used to configure basic printer settings and settings for printing from a DOS application. To configure the settings, touch the [Printer Condition Settings] key. Printer Default Settings The default settings are used to set advanced print conditions for printing in an environment where the print driver is not used (such as printing from MS-DOS or from a computer that does not have the provided print driver installed).
Page 611: Pcl Settings
SYSTEM SETTINGS PCL Settings This is used to set the symbol sets, fonts, and line feed code used in a PCL environment. Settings Item Description Selections Specify the symbol set used for Select from 35 items. PCL Symbol Set Setting printing.
Page 612: Document Filing Control
SYSTEM SETTINGS Document Filing Control Document Filing Control is used to create, edit, and delete custom folders for document filing. Touch the [Document Filing Control] key to configure the settings. When the [Document Filing Control] key is touched, the following screen will appear. Folder List Back Add New...
Page 613: Usb-Device Check
SYSTEM SETTINGS USB-Device Check This lets you check the connection when a USB device is connected to the machine. Touch the [USB-Device Check] key to check the connection. The status of a USB device that is not compatible with the machine will not appear. User Control This section explains settings for user control.
Page 614: System Settings (Administrator)
SYSTEM SETTINGS SYSTEM SETTINGS (ADMINISTRATOR) This section explains the system settings that are configured by the administrator of the machine. Accessing the System Settings (Administrator) To access the system settings (administrator), the administrator must log in as explained below. When User Authentication is not Enabled When "User Authentication Setting"...
Page 615: When User Authentication Is Enabled
SYSTEM SETTINGS When User Authentication is Enabled When "User Authentication Setting" (page 7-46) is enabled, follow the procedure below to log in. When auto login is enabled, the login screen will not appear. When user authentication is by login name and password (and e-mail address) Administrator login is performed in the user selection screen.
Page 616 SYSTEM SETTINGS Login by user number Touch the [Admin Login] key. User Authentication Enter the administrator password in the administrator password entry screen. This completes the administrator login procedure. The system settings (administrator) can be used. Admin Login • In addition to login by touching the [Admin Login] key, the system settings (administrator) can also be accessed when login is performed by selecting a user with administrator rights from the user list or by entering a user number with administrator rights.
Page 617: System Settings (Administrator) List
SYSTEM SETTINGS System Settings (Administrator) List The system settings that appear following administrator login are shown below. The default setting for each item is also shown. • Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings. •...
Page 618 SYSTEM SETTINGS Energy save Item Factory default setting Page 7-60 ■ Energy Save ● Eco Scan Setting Enabled 7-60 ● Power Management Setting 7-60 Toner Save Mode Print Disabled 7-60 Copy Disabled Preheat Mode Setting 1 min. 7-60 Turn off Panel Display during pre-heat mode Enabled Auto Power Shut-Off Timer Fix transition time.
Page 619 SYSTEM SETTINGS Item Factory default setting Page ● Customize Key Setting* Copy Customize 1 File 7-64 Customize 2 Quick File Customize 3 – Scan Customize 1 Address Review Customize 2 File Customize 3 Quick File Internet Fax* (Same as Scan) 7-64 Fax* (Same as Scan)
Page 620 SYSTEM SETTINGS Item Factory default setting Page Operation from Specified PC Operational Authority Prohibited Hostname or IP Address of PC – View Password Entry Screen Display in Both PC and MFP 7-66 Operation by User who Has Password Operational Authority Prohibited View Password Entry Screen Display in Both PC and MFP...
Page 621 SYSTEM SETTINGS Item Factory default setting Page ● Disabling of Devices 7-69 Disabling of Document Feeder Disabled 7-69 Disabling of Duplex Disabled 7-69 Disabling of Optional Paper Feed Unit* Disabled 7-69 Disabling of Tray Settings Disabled 7-69 Disabling of Color Mode* Disabled 7-69...
Page 622 SYSTEM SETTINGS Item Factory default setting Page Disabling of Auto Paper Selection Disabled 7-72 Auto Selection Setting of Tray that is Supplied the Paper Disabled 7-72 Color 600dpi x 600dpi Scanning Mode for Document Feeder Enabled 7-72 Color Quick Scan from Document Glass Disabled 7-72 B/W 600dpi x 600dpi Scanning Mode for Document Feeder...
Page 623 SYSTEM SETTINGS Printer Settings Item Factory default setting Page 7-77 ■ Printer Settings ● Default Settings 7-77 Prohibit Notice Page Printing Enabled 7-77 Prohibit Test Page Printing Disabled 7-77 A4/Letter Size Auto Change Disabled 7-77 Print Density Level Color 7-77 Black &...
Page 624 SYSTEM SETTINGS Item Factory default setting Page Preview Setting Scan (fax when fax is installed) • Received Data Image Check Setting Disabled 7-80 • Default List/Thumbnail Display List Image Orientation Portrait 7-80 Initial Resolution Setting • Scan Apply the Resolution Set when Stored: Disabled 200 X 200 dpi •...
Page 625 SYSTEM SETTINGS Item Factory default setting Page Own Name and Destination Set Sender Data Registration • Sender Name – 7-83 • Sender Fax Number – • I-Fax Own Address – Registration of Own Name Select – 7-83 ● Scan Settings 7-84 Other Settings 7-84...
Page 626 SYSTEM SETTINGS Item Factory default setting Page Speaker Volume Setting – • Receive Signal Middle 7-86 • Communication Error Signal Middle Original Print on Transaction Report Print Out Error Report Only 7-86 Transaction Report Print Select Setting • Single Sending Print Out Error Report Only 7-86 •...
Page 627 SYSTEM SETTINGS Document Filing Settings Item Factory default setting Page 7-90 ■ Document Filing Settings ● Other Settings 7-90 Default Mode Settings Sharing Mode 7-90 Sort Method Setting Date 7-90 Administrator Authority Setting Delete File Disabled 7-90 Delete Folder Disabled Change Password Disabled Delete All Quick Files...
Page 628 SYSTEM SETTINGS Item Factory default setting Page ● Document Output Options Printer Copier Enabled Printer Enabled Scan Send Disabled Internet Fax Send (Incl. PC-I-Fax)* Disabled Fax Send (Incl. PC-Fax)* Disabled Scan to HDD Enabled Scan Send Copier Disabled Scan Send Enabled Internet Fax Send (Incl.
Page 629 SYSTEM SETTINGS List Print (Administrator) Item Factory default setting Page 7-93 ■ List Print (Administrator) ● Administrator Settings List – 7-93 ● Image Sending Activity Report – 7-93 ● Data Receive/Forward List – 7-93 ● Web Settings List* – 7-93 ●...
Page 630 SYSTEM SETTINGS Enable/Disable Settings Item Factory default setting Page 7-96 ■ Enable/Disable Settings ● Printer Condition Settings 7-96 Disable Blank Page Print Disabled 7-96 ● User Control 7-96 Disabling of Printing by Invalid User Disabled 7-96 ● Operation Settings 7-96 Cancel Auto Clear Timer Disabled 7-96...
Page 631 SYSTEM SETTINGS Item Factory default setting Page ● Image Send Settings 7-97 Other Disabling 7-97 Disable Switching of Display Order Disabled 7-97 Disable Scan Function • PC Scan Disabled 7-97 • USB Memory Scan Disabled Settings to Disable Registration 7-97 Disable Registering Destination from Operation Panel All disabled 7-97...
Page 632 ● Restore Factory Defaults – 7-101 ● Store Current Configuration – 7-101 ● Restore Configuration – 7-101 Sharp OSA Settings Item Factory default setting Page 7-102 ■ Sharp OSA Settings ● External Account Setting 7-102 External Account Control Disabled 7-102...
Page 633: User Control
SYSTEM SETTINGS User Control User Control is used to configure settings for user authentication. Touch the [User Control] key to configure the settings. User Authentication Setting These settings enable or disable user authentication and specify the authentication method. When user authentication is enabled, each user of the machine is registered. When a user logs in, settings for that user are applied.
Page 634: Other Settings
SYSTEM SETTINGS Other Settings Actions when the Limit of Pages Automatically print stored jobs for Output Jobs after login This setting determines whether or not a job will be When retention is enabled in the printer driver and print completed if the page limit is reached while the job is in data has been spooled to the machine, you can have the progress.
Page 635: Perform Ldap Server Access Control
SYSTEM SETTINGS Name of Perform LDAP server access attribute in Attribute Setting control. factory default state Access control information for page count limits, authorities, and favorite operations can be stored on an My Folder myfolder Folder name of user LDAP server, and by using this LDAP server for network folder stored in the authentication, user authentication based on the stored machine.
Page 636 SYSTEM SETTINGS Item Description Display Usage Status after Login E-mail Address Information is acquired from the When user authentication is enabled, this setting LDAP server. specifies whether or not the page counts of a user My Folder appear when the user logs in. Pages Limit Group Authority Group...
Page 637: User List
SYSTEM SETTINGS User List This is used to store, edit, and delete users when user authentication is enabled. When the [User List] key is touched, the following screen appears. User List Back Add New Delete All Users Delete All Users Auto-Registered Administrator User Index Switch...
Page 638 SYSTEM SETTINGS Authority Group* Admin User* Guest* Favorite Operation Group Following the System Settings* *1 Items that can be changed. *2 For detailed information of each of the settings, see "List of settings and factory default settings of template groups" (page 7-54). Settings Item Description...
Page 639: Page Limit Group List
SYSTEM SETTINGS Page Limit Group List This is used to store groups of Account Limit Settings. The page limits for each user are specified by selecting one of these stored groups when the user is stored. When the [Page Limit Group List] key is touched, the following screen appears. System Settings Page Limit Group List Back...
Page 640: Authority Group List
SYSTEM SETTINGS Authority Group List Use this to store groups of user authority settings. The authority of each user is specified by selecting one of these stored groups when the user is stored. When the [Authority Group List] key is touched, the following screen appears. System Settings Authority Group List Back...
Page 641 SYSTEM SETTINGS List of settings and factory default settings of template groups Item Description Group Name Store the name of the group (max. 32 characters). Select one of the previously stored groups for use as a template for the new group.
Page 642 SYSTEM SETTINGS Item Description Prints (Document Filing) Only Black & White • Color Mode Approval Setting All allowed All allowed Allowed • Special Modes Usage Allowed Allowed Prohibited • Document Filing Image Check Allowed Allowed Prohibited • Display only the Files of Logged-in Prohibited Prohibited Prohibited...
Page 643: Favorite Operation Group List
SYSTEM SETTINGS Favorite Operation Group List This is used to store favorite operation groups and My Menu. Some settings may not be configured depending on the connecting state of peripheral devices. This setting can only be configured in the Web pages. It cannot be configured in the touch panel of the machine. Favorite Operation Group Registration Sets of preferred settings can be as groups.
Page 644 SYSTEM SETTINGS My Menu List Home screen settings must be previously stored. Select a My Menu when storing a favorite operation group. Settings Item Description My Menu Name Enter a maximum of 32 characters for the My Menu name. Select the My Menu to be the Select one of the previously stored My Menus as a template for the new My Menu.
Page 645: User Count
SYSTEM SETTINGS User Count This displays the total number of pages printed by each user. When the [User Count] key is touched, the following screen appears. User Count Back Select All Users Show Delete Administrator User Index Switch Other User Name 1 *Name 2 Name 3...
Page 646: Card Area Settings
SYSTEM SETTINGS Resetting user counts Select a user in the setting screen and touch the [Reset] key. A count reset screen for that user will appear. The reset screen will vary depending on whether a single user or multiple users were selected. The items displayed in each case are described in the table below.
Page 647: Preheat Mode Setting
• Image Send Select the time that best suits the needs of your • Document Filing workplace. • System Settings • Sharp OSA Turn off Panel Display during pre-heat mode Setting this checkbox to turns off the panel display in Power Management Preheat Mode.
Page 648: Power On/Off Schedule Setting
SYSTEM SETTINGS Power ON/OFF Schedule Auto Power Shut-Off Timer Setting Settings that depend on the usage conditions, such as the time till Auto Power Shut-Off is enabled or the time The machine operator panel can be turned On or Off at a zone for Auto Power Shut-Off can be configured.
Page 649: Operation Settings
Sharp OSA screen*. Initial Screen in which setting is effective...
Page 650: Disabling Of Clock Adjustment
SYSTEM SETTINGS Disabling of Clock Adjustment This setting is used to prohibit changing of the date and time. Set Keyboard Priority When an external keyboard is connected, you can select whether the soft keyboard or the external keyboard is used. Initial Original Count Setting This specifies whether or not "Original Count"...
Page 651: Mfp Display Pattern Setting
When [Use Custom Image] is selected, the Mode Key image can be changed using a gif file Image of up to 10 KB in size. A shortcut to the Sharp OSA application and keys that appear in "My Menu" can be stored (a Application Keys total of eight keys can be stored).
Page 652: My Menu Settings
SYSTEM SETTINGS My Menu Settings Use this to configure the My Menu screen that appears when the [My Menu] key is pressed. The settings are shown below. Item Description Display Title Show a title on the My Menu. Title Enter a maximum of 70 characters for the title name. Display User Name* Show the currently logged-in user name on the My Menu.
Page 653: Preview Setting
Store text that you frequently use when entering an address or domain. Up to 16 characters can be entered. Cookie Setting Select whether or not information about cookies is stored in the MFP when using Sharp OSA. Delete Cookie Delete the information about cookies stored in the MFP.
Page 654: Device Control
SYSTEM SETTINGS Device Control These settings control devices installed on the machine. Touch the [Device Control] key to configure the settings. Other Settings AB/Inch Type Setting Auto Paper Selection Setting The numbers and units of the default settings and input The paper types* that the Auto Paper Selection function will ranges that appear in the setting screens can be switched select can be specified.
Page 655: Optimization Of A Hard Disk
SYSTEM SETTINGS Optimization of a Hard Disk This function optimizes the hard drive of the machine by defragmenting data. If a job is in progress, a message will appear and optimization will not begin until the job is finished. During optimization, the following operations are not possible: •...
Page 656: Disabling Of Devices
Promptly contact (When an optional paper feed unit is installed.) your dealer or nearest SHARP service department to This setting is used to disable the optional paper feed have a service technician cancel the setting and unit, such as when it malfunctions.
Page 657: Copy Function Settings
SYSTEM SETTINGS Copy Function Settings The following settings are related to copying. Touch the [Copy Function Settings] key to configure the settings. Default settings selected with these settings apply to all functions of the machine (not just the copy function). Initial Status Settings The copier settings are reset when the [POWER] key ( ) is turned on, when the [CLEAR ALL] key (...
Page 658: Other Settings
SYSTEM SETTINGS Other Settings Copy Exposure Adjustment Card Shot Settings This is used to adjust the exposure level when [Auto] is This is used to set the default original size for the card used for the copy exposure. shot function. Both the X (horizontal) and Y (vertical) dimensions of the Color original can be set from 1"...
Page 659: Disabling Deletion Of Job Programs
SYSTEM SETTINGS Disabling Deletion of Job Programs Color 600dpi x 600dpi Scanning Mode for Document Feeder This is used to prohibit the deletion and changing of copy settings stored in job programs. The resolution for copying in color using the automatic document feeder can be changed from 600 x 300 dpi to 600 x 600 dpi (high quality mode).
Page 660: Color Adjustments
SYSTEM SETTINGS Color Adjustments B/W 600dpi x 600dpi Scanning Mode for Document Feeder The following color settings can be configured. The resolution for copying in black and white using the automatic document feeder can be changed from 600 x Initial Color Balance Setting 300 dpi to 600 x 600 dpi (high quality mode).
Page 661: Network Settings
SYSTEM SETTINGS Network Settings Network settings are described below. Touch the [Network Settings] key to configure the settings. * Depending on your machine specifications, only the items under "General Setting" will be displayed. • When settings are changed, the changes will take effect after the machine is restarted. To restart the machine see "TURNING THE POWER ON AND OFF"...
Page 662: Connection Type Switching
SYSTEM SETTINGS Connection Type Switching Specify the network connection type (wired or wireless). For wireless communication via an access point, select "Wireless (Infrastructure Mode)". (A wired connection already being established at this time will be disabled.) For wireless communication between devices without using an access point, select "Wired + Wireless (Access Point Mode)".
Page 663: Nas Setting
SYSTEM SETTINGS Configure (Infrastructure Mode) Access Point Search Encry. The access point that is used is found, and when Select an encryption type. selected, the SSID, security type, and encryption Security Key settings of the access point are automatically configured. Enter a security key.
Page 664: Printer Settings
SYSTEM SETTINGS Printer Settings Settings related to the printer function can be configured. Touch the [Printer Settings] key to configure the settings. Default Settings Printer condition settings are described below. Prohibit Notice Page Printing Job Spool Queuing This setting is used to disable printing of notice pages. When this function is enabled, received print jobs are displayed in the spool queue of the job status screen.
Page 665: Interface Settings
SYSTEM SETTINGS Interface Settings These settings are used to control and monitor data transmitted to the USB port or network port of the machine. Hexadecimal Dump Mode Enable Network Port This function is used to print the print data from a This is used to enable printing from the network port.
Page 666: Auto Color Calibration
SYSTEM SETTINGS Auto Color Calibration This is used to perform automatic color correction when the color in color printing is off. The machine prints a test patch, the test patch is scanned, and the color is automatically corrected. After the [Execute] key is touched and a test patch is printed, a message appears prompting you to begin automatic calibration.
Page 667: Image Send Settings
SYSTEM SETTINGS Image Send Settings Settings related to the image send function (scan, Internet fax, etc.) can be configured. Touch the [Image Send Settings] key to configure the settings. For explanations of settings related to the fax function, see "SYSTEM SETTINGS FOR FAX"...
Page 668: Default Exposure Settings
SYSTEM SETTINGS Default Exposure Settings Disable Switching of Display Order This is used to set the default exposure settings for This is used to prohibit changes to the order of display scanning a document in image send mode. Select [Auto] (search number order, ascending, descending) in the or [Manual].
Page 669: Disable Registering Destination On Web Page
SYSTEM SETTINGS Disable Registering Destination on Disable Registration Using Web Page Network Scanner Tool (When network connection is enabled.) (When network connection is enabled.) This disables address control from the Web pages. This disables address control from the Network Scanner Configure the setting for each of the following items: Tool.
Page 670 SYSTEM SETTINGS Disable PC-Fax Transmission (When facsimile function is installed.) This prohibits PC-Fax transmission. Own Name and Destination Set Use this setting to enter the Internet fax address, fax number of the machine and the name of the user. Sender Data Registration Use this to store the sender name for fax and Internet fax, the sender number for fax, and the sender address for Internet fax.
Page 671: Scan Settings
SYSTEM SETTINGS Scan Settings Settings related to scanning can be configured. Other Settings Initial File Format Setting This is used to set the default file format for Scan to E-mail and USB memory mode when the e-mail address Default Sender Set is entered manually by touching the [Address Entry] key.
Page 672: Default Address Setting
SYSTEM SETTINGS Maximum Size of E-mail Pre-Setting Mail Signature Attachments (E-mail) A signature can be automatically appended to the end of the body text of e-mail. This is convenient when it is a To prevent the transmission of excessively large image corporate policy to append a specific signature at the files by Scan to E-mail, a file size limit can be set from end of e-mail.
Page 673: I-Fax Settings
SYSTEM SETTINGS I-Fax Settings These settings can be configured when the Internet fax expansion kit is installed. Transaction Report Print Select I-Fax Default Settings Setting These settings are used to configure the default settings for Internet fax. This is used to select whether or not a transaction report will be printed, and if printed, the condition for being printed.
Page 674: Activity Report Print Select Setting
SYSTEM SETTINGS Activity Report Print Select Setting I-Fax Send Settings This is used to have the Image Sending Activity Report I-Fax Send Settings are described below. stored in the machine's memory automatically print at specified times. The Image Sending Activity Report can be set to I-Fax Reception Report On/Off automatically print each time the number of transactions Setting...
Page 675: Rotation Sending Setting
SYSTEM SETTINGS Rotation Sending Setting I-Fax Receive Settings When transmitting an image that is one of the following I-Fax Receive Settings are described below. sizes, this function rotates the image counterclockwise 90 degrees. (The setting can be configured separately for each size.) Auto Receive Reduce Setting 5-1/2"...
Page 676: Pop3 Communication Timeout Setting
SYSTEM SETTINGS Receiving Date & Time Print Allow/Reject Mail or Domain Name Setting Enable this setting to have the date and time of reception printed. This setting is used to allow or refuse reception from Select [Inside the Received Image] or [Outside the specified addresses/domains.
Page 677: Document Filing Settings
SYSTEM SETTINGS Document Filing Settings Document filing settings are described below. Touch the [Document Filing Settings] key to configure the settings. Other Settings Default Mode Settings Default Color Mode Settings This is used to specify which mode, Sharing or This sets the default settings for black & white and color Confidential, is used as the default mode when storing a when Scan to HDD is used.
Page 678: Batch Print Settings
SYSTEM SETTINGS Color Data Compression Ratio Card Shot Settings Setting This is used to set the default original size for the card shot function. [Low], [Medium], or [High] can be selected for the default Both the X (horizontal) and Y (vertical) dimensions of the compression ratio for transmission of a stored color file.
Page 679: Document Output Options
SYSTEM SETTINGS Document Output Options The use of a stored file can be allowed or prohibited by operation type and by the mode from which the file was stored. The items that appear will vary depending on the functions that have been added to the machine. Item Description Printer...
Page 680: List Print (Administrator)
SYSTEM SETTINGS List Print (Administrator) This is used to print lists and reports that are only for use by the administrator of the machine. Touch the [List Print (Administrator)] key to configure the settings. Administrator Settings List Lists of the administrator settings for the following modes can be printed.
Page 681: Security Settings
SYSTEM SETTINGS Security Settings The following settings are related to security. Touch the [Security Settings] key to configure the settings. SSL Settings IEEE802.1X Setting SSL can be used for data transmission over a network. IEEE802.1X can be used to authenticate a user to allow SSL is a protocol that enables the encryption of use of the machine.
Page 682 SYSTEM SETTINGS Data Clearance Settings Initialize Private Data/Data in Machine Enabling this function activates the following security functions on the machine. The system-set values can be restored to the factory default state and the data stored in the machine can be Use caution, as this function cannot be canceled once deleted.
Page 683: Enable/Disable Settings
Promptly contact other jobs ahead of a job that has been stopped* your dealer or nearest SHARP service department to because the paper required for the job is not in any of have a service technician cancel the setting and the trays).
Page 684: Other Disabling
SYSTEM SETTINGS Copy Function Settings Image Send Settings Disabling Deletion of Job Programs Other Disabling This is used to prohibit the deletion and changing of copy Disable Switching of Display Order settings stored in job programs. This is used to prohibit changes to the order of display Disabling of Bypass-Tray in Duplex Copy (search number order, ascending, descending) in the This is used to prohibit the use of the bypass tray when...
Page 685 SYSTEM SETTINGS Disable Destination Registration Using Global Document Filing Settings Address Search (When network connection is enabled.) Disable Stamp for Reprinting This disables address control from the global address When a stored file is retrieved and printed, this setting search. prohibits the selection of a "Stamp"...
Page 686: Change Administrator Password
SYSTEM SETTINGS Change Administrator Password This is used to change the administrator password. Touch the [Change Administrator Password] key to change the password. When changing the password, be sure to remember the new password. It is recommended that you periodically change the administrator password. Password Enter the new administrator password (5 to 32 characters).
Page 687: Data Backup
• This function cannot be used while the system settings are in use, while a job is being executed, or when there is a reserved job. • For machines for which data can be imported, contact your SHARP dealer or nearest SHARP service department. Storage Backup...
Page 688: Storing/Calling Of System Settings
SYSTEM SETTINGS Storing/Calling of System Settings The current system settings can be stored, previously stored system settings can be retrieved, and the factory default system settings can be restored. Touch the [Storing/Calling of System Settings] key to configure the settings. Restore Factory Defaults This is used to return the system settings to the factory default settings.
Page 689: External Account Setting
SYSTEM SETTINGS Sharp OSA Settings External Account Setting Job Priority Preference Set the playing speed of the animation in the Sharp OSA External Account Control application. When this setting is enabled, the machine enters The following settings can be configured.
Page 690: System Settings For Fax
SYSTEM SETTINGS SYSTEM SETTINGS FOR FAX This section explains system settings that are specifically for the fax function. The system settings for the fax function can only be configured when the facsimile function is installed. System Settings for Fax (General) List When the system settings for fax are accessed with general rights, the following items appear.
Page 691: Address Control
SYSTEM SETTINGS Address Control Address Book This section explains items specifically used for fax in "Address Control". For items that are also used for other functions, see "Address Control" (page 7-16). When the [Address Book] key is touched, the following screen appears. Address Book Back Sort Address...
Page 692 SYSTEM SETTINGS Settings Item Description General items stored Select the type of address to be stored in the address book. Address Type In this case, select [Fax]. Set a search number. The lowest available number is automatically entered. To Search Number change the number, enter a number from 0001 to 1000.
Page 693: Editing And Deleting A Memory Box
SYSTEM SETTINGS F-Code Memory Box This section explains how to store memory boxes for various types of F-code communication. When the [F-Code Memory Box] key is touched, the following screen appears. System Settings F-Code Memory Box Back Add New Sort Polling Memory Box 1 Box 2...
Page 694 • [ ] and [#] cannot be used in a sub-address. • Do not forget the Print PIN. In the event that you forget the Print PIN or need to verify the Print PIN, contact your SHARP dealer or nearest SHARP customer service center.
Page 695: Fax Data Receive/Forward
SYSTEM SETTINGS Fax Data Receive/Forward This section explains settings for reception and forwarding. Fax Settings The following items appear when the "Fax Settings" are configured. Item Description Set the fax reception method. • Auto Reception: When a call comes in, the machine rings and then automatically begins fax reception.
Page 696: System Settings For Fax (Administrator) List
SYSTEM SETTINGS System Settings for Fax (Administrator) List When the system settings for fax are accessed with administrator rights, the following items appear. For information on the general settings, see "System Settings for Fax (General) List" (page 7-103). • For the procedure for using the system settings (administrator), see "Accessing the System Settings (Administrator)"...
Page 697 SYSTEM SETTINGS Item Factory default setting Page Transaction Report Print Select Setting • Single Sending Print Out Error Report Only • Broadcasting Print Out All Report 7-112 • Receiving No Printed Report • Confidential Reception Print Out Notice Page Activity Report Print Select Setting •...
Page 698: Image Send Settings
SYSTEM SETTINGS Image Send Settings Settings related to the image send function (scan, Internet fax, etc.) can be configured. Touch the [Image Send Settings] key to configure the settings. Fax Settings Pause Time Setting Fax Default Settings Use this to change the length of pauses inserted in fax The fax settings can be enabled or disabled to suit the numbers.
Page 699: Distinctive Ring Detection
SYSTEM SETTINGS Original Print on Transaction Activity Report Print Select Setting Report This is used to have the Image Sending Activity Report that is stored in the machine's memory printed at regular When a transaction report is printed for a memory intervals.
Page 700: Fax Send Settings
SYSTEM SETTINGS Date/Own Number Print Position Fax Send Settings Setting Settings for fax transmission can be configured. This setting determines the position of the date and sender information printed at the top of faxes by the receiving Auto Reduction Sending Setting machine.
Page 701: Print Style Setting
SYSTEM SETTINGS Print Style Setting Fax Receive Settings This setting determines the paper selection condition Settings for fax reception can be configured. when printing received faxes. Select one of the three conditions below. Print Actual Size Cut off Disabled Number of Calls in Auto Reception The received fax image is printed at full size without This setting is used to select the number of rings on dividing it onto multiple sheets of paper.
Page 702: Fax Output Settings
SYSTEM SETTINGS Receiving Date & Time Print Allow/Reject Number Setting Enable this setting to have the date and time of Use this setting to specify whether reception from a reception printed. stored number is to be allowed or rejected. Select [Inside the Received Image] or [Outside the Item Description Received Image] for the position where the date and...
Page 703: Fax Polling Security
SYSTEM SETTINGS Fax Polling Security The following settings are for regular polling memory using the Public Box. Set Fax Polling Security When the memory polling function is used, this setting determines whether any machine will be allowed to poll your machine, or only machines that have been stored in your machine.
Page 704: System Settings Menu
SYSTEM SETTINGS SYSTEM SETTINGS MENU Job Count Device Count Total Count Clock Adjust Keyboard Select Default Settings All Custom Setting List Printer Test Page List Print (User) Document Filing Folder List Sending Address List Tray Settings Paper Type Registration Paper Tray Settings Auto Tray Switching Custom Size Registration (Bypass) Address Book...
Page 705 SYSTEM SETTINGS Image Send Settings Operation Settings Other Settings Default Display Settings Default Exposure Settings Disable Switching of Display Order Must Input Next Address Key at Address Book Default Selection Hold Setting for Received Data Print Broadcast Setting Preview Setting Scan Complete Sound Setting Erase Width Adjustment The Number of File Name/Subject/Body...
Page 706: Chapter 8 Troubleshooting
This chapter provides solutions to possible problems in a question and answer format. Locate the question that relates to your problem and use the answer to help correct the situation. If you are unable to solve a problem using this manual, please contact your dealer or nearest SHARP Service Department. System settings Descriptions of system settings similar to the following example appear in this manual.
Page 707: Troubleshooting Problems
• When turning off the main power switch, ensure that each of the lamps on the operation panel has been turned off. Contact your dealer or nearest SHARP Service Department. If, having tried the above steps, your problem remains unsolved, contact the dealer from whom you purchased the machine or your nearest SHARP Service Department. Contents...
Page 708: Frequently Asked Questions
TROUBLESHOOTING FREQUENTLY ASKED QUESTIONS Making a copy of a non-standard size original The procedure for making a copy of a payment slip or other non-standard size original is explained below. The "Centering" special mode of copy mode can be selected to position the copied image in the center of the paper.
Page 709: I Can't Print From A Computer
Install the printer driver and try again. Checking port settings in the printer driver Display the printer driver's Properties dialog box and click the [Port] tab. SHARP MX-XXXX Do your port settings look like this? SHARP MX-XXXX Your port settings should look like this.
Page 710: Printing On An Envelope
TROUBLESHOOTING Printing on an envelope The procedure for printing on an envelope is explained below. Only the name and address side of an envelope can be printed on. It is recommended that you do a test print to check the print result before using an envelope.
Page 711: Changing The Paper Size Used For A Print Job
TROUBLESHOOTING Changing the paper size used for a print job When the size of paper specified for a print job is not loaded in any of the machine's paper trays, follow the steps below to change the paper size. Paper Empty 1 Check details on the job.
Page 712: Adjusting The Volume Of The Ringer
TROUBLESHOOTING Adjusting the volume of the ringer If the ringing sound made when the machine receives a fax is too loud or too soft, follow the steps below to adjust the volume. The fax ringer volume is adjusted in the system settings (administrator). Press the [SYSTEM SETTINGS] key on the operation panel, touch [Image Send Settings] - [Fax Settings] - [Fax Default Settings] -...
Page 713: Indicators And Display Messages
If one of the following messages appears in the display, take prompt action as instructed by the message. Message Action Maintenance required. It is time for regular maintenance. Contact your SHARP Service Department. Call for service. – Turn off the power and then turn it back on. If this does not clear the message, write down the 2-digit main code and 2-digit sub-code ("...
Page 714: Removing Misfeeds
TROUBLESHOOTING REMOVING MISFEEDS This section explains what to do when a paper misfeed occurs in the machine. Caution Fusing The fusing unit is hot. Take care not to burn yourself when removing a misfeed. unit • When removing misfed paper, do not touch or damage the transfer belt. •...
Page 715: Problems Related To Copying Operation
TROUBLESHOOTING COPYING PROBLEMS RELATED TO COPYING OPERATION • Copying does not take place............8-10 •...
Page 716 TROUBLESHOOTING Problem Point to check Solution Two-sided copying Does the paper type setting of the Check "Tray Settings" in the system settings. If the does not take place. selected tray specify a type of paper that [Disable Duplex] checkbox is selected , two-sided cannot be used for two-sided copying? copying using that tray will not be possible.
Page 717: Problems Related To Copy Results
TROUBLESHOOTING PROBLEMS RELATED TO COPY RESULTS Problem Point to check Solution The image is too light Is the image too light or too dark? Select an appropriate exposure mode for the or too dark. original being copied and adjust the exposure level manually.
Page 718: Problems Related To Printing Operation
TROUBLESHOOTING PRINTING PROBLEMS RELATED TO PRINTING OPERATION • Printing does not take place............8-13 •...
Page 719 TROUBLESHOOTING Problem Point to check Solution Printing does not take Is the IP address selected correctly? Check the IP address setting. place. (Windows) If the machine does not have a permanent IP address (the machine receives an IP address from a DHCP server), printing will not be possible if the IP address changes.
Page 720 TROUBLESHOOTING Problem Point to check Solution Printing does not take Was a Notice Page printed? Check the printed Notice Page. place. A Notice Page will be printed to indicate the cause of the problem if a print job cannot be performed as specified and the cause is not shown in the display.
Page 721: Problems Related To Print Results
TROUBLESHOOTING Problem Point to check Solution Direct printing of a file Is "IPsec Settings" enabled on the Check with your administrator. in a shared folder on a machine? When "IPsec Settings" is enabled in the system settings computer is not (administrator), direct printing of a file in a shared folder possible.
Page 722 TROUBLESHOOTING Problem Point to check Solution Part of the image is Does the paper size specified by the job Make sure that the paper size setting matches the cut off. match the size of paper loaded in the size of paper loaded in the tray. tray? The paper size setting is selected as follows: Windows:...
Page 723 TROUBLESHOOTING Problem Point to check Solution Many nonsense Is your computer or the machine in an Cancel printing, restart your computer and the characters are printed. unstable state? machine, and try printing again. If little free space remains in the memory or hard drive of your computer, or many jobs have been spooled on the machine and it has little free memory remaining, printed text may turn into nonsense characters.
Page 724 TROUBLESHOOTING FACSIMILE PROBLEMS RELATED TO TRANSMISSION • Transmission does not take place........... .8-20 •...
Page 725: Problems Related To Transmission
TROUBLESHOOTING PROBLEMS RELATED TO TRANSMISSION Problem Point to check Solution Transmission does Is the telephone line connected Check the telephone line jack, the wall jack, and any not take place. securely? extension adapters to make sure that all connections are secure. ☞...
Page 726 TROUBLESHOOTING Problem Point to check Solution Transmission does Does the job status screen (completed Perform the transmission again. not take place. jobs) or a transaction report indicate that If the transmission is still not successful after recalling is the transmission was not successful? performed as set in "Recall in Case of Line Busy"...
Page 727: Problems Related To Reception
TROUBLESHOOTING PROBLEMS RELATED TO RECEPTION Problem Point to check Solution Printing does not take Does a message appear in the display Restore printing capability as instructed by the place after reception. instructing you to add toner or paper? message. (Printing is not possible when this screen appears.) Does a password entry screen appear? Enter the correct password with the numeric keys.
Page 728: Problems Related To Telephone
TROUBLESHOOTING PROBLEMS RELATED TO TELEPHONE Problem Point to check Solution Dialing is not possible. Is the extension phone connected? Check connections. Check the telephone line jack, the extension phone jack, the wall jack, and any extension adapters to make sure that all connections are secure. You cannot talk to the Did you dial using the speaker? Use the extension phone.
Page 729 TROUBLESHOOTING PROBLEMS RELATED TO ONE-TOUCH INDIVIDUAL KEYS / GROUP KEYS Problem Point to check Solution A one-touch individual Has the maximum number of keys been Delete one-touch keys and group keys that are not key or group key stored? being used. cannot be stored.
Page 730: Problems Related To One-Touch Individual Keys / Group Keys
TROUBLESHOOTING SCANNING / INTERNET FAX PROBLEMS RELATED TO SCANNING / INTERNET FAX OPERATION • Transmission does not take place........... .8-25 •...
Page 731 TROUBLESHOOTING Problem Point to check Solution Transmission does Does the image file exceed the e-mail Check with your administrator. not take place. attachment limit set in the system If your administrator has set a limit on the size of settings (administrator)? transmitted files, a file that exceeds the limit cannot be transmitted.
Page 732: Problems Related To Scan Results
TROUBLESHOOTING Problem Point to check Solution The received image Does the viewer program used by the Use a software program that is capable of opening file cannot be opened. the selected file type and compression mode. recipient support the format of the The recipient may be able to open the file if you change received image data? the file type and compression mode selected at the time...
Page 733 TROUBLESHOOTING Problem Point to check Solution The quality of the Is the original printed matter such as a Use the following method to reduce the occurrence scanned image is book or magazine? of vertical patterns (moiré) poor. When the original is printed matter, vertical patterns (moiré) may occur.
Page 734 TROUBLESHOOTING Problem Point to check Solution The image is too light Is the threshold value suitable? Check the "B/W Threshold" setting. or too dark. When scanning from the TWAIN driver with [Mono 2 (When using PC gradation] selected from the [Color Mode] of the Scan.) "Custom Settings"...
Page 735 TROUBLESHOOTING Problem Point to check Solution A one-touch individual Is the key included in a program key? Remove the key from the program and then edit or key or group key delete the key. cannot be edited or (If the key is included in multiple programs, it must be deleted.
Page 736: Problems Related To Filing
TROUBLESHOOTING DOCUMENT FILING PROBLEMS RELATED TO FILING • Document filing does not take place..........8-31 •...
Page 737: Problems Related To File Management
TROUBLESHOOTING Problem Point to check Solution A job cannot be stored Do custom folders appear in "Folder Click the [Get Folder Name] button in the document in a custom folder. Information"? filing save screen of the printer driver to call up the (When printing) custom folders that have been created on the machine.
Page 738: A File Name Is Cut Off
TROUBLESHOOTING Problem Point to check Solution A file name is cut off. Was the file name stored in the If the name was stored in the advanced transmission advanced transmission settings during a settings before Quick File or File settings were scan or Internet fax transmission? configured, that name will be used for the stored file.
Page 739: General Problems
TROUBLESHOOTING GENERAL PROBLEMS PROBLEMS RELATED TO MACHINE OPERATION • Specified machine functions cannot be used..........8-35 •...
Page 740: Problems Related To Machine Operation
In this event, stop using the machine, unplug the power plug, and contact your dealer or nearest SHARP Service Department. (When contacting your dealer or nearest SHARP Service Department, inform them of the displayed error code.) 8-35 Contents...
Page 741: Printing Is Not Possible Or Stops During A Job
TROUBLESHOOTING Problem Point to check Solution Printing is not Is a tray out of paper? Add paper as instructed by the message in the possible or stops touch panel. during a job. Is the machine out of toner? Replace the toner cartridge. When toner runs low, a message will appear to inform you that the toner cartridge must be replaced.
Page 742: The Paper Misfeeds
Are multiple sheets feeding at once? Fan the paper well before loading it. Are you using paper that is not within Use SHARP-recommended paper. the specifications? Using paper that is not supported may result in misfeeds, creases, or smudges.
Page 743: Paper Does Not Feed From The Paper Tray
TROUBLESHOOTING Problem Point to check Solution Paper does not feed Is the paper loaded correctly in the Set the guides to the size of the paper. from the paper tray. paper tray? Make sure the height of the paper does not exceed the indicator line.
Page 744: Problems Related To Quality / Print Results
Does a message appear indicating the Contact your dealer or nearest SHARP Service need for maintenance? Department as soon as possible. Toner does not adhere Are you using paper that is not within Use SHARP-recommended paper.
Page 745: Part Of The Image Is Cut Off
TROUBLESHOOTING Problem Point to check Solution Part of the image is Has the correct paper size been set? If you are using a special size, be sure to specify the cut off. paper size. If the size of paper loaded in a tray was changed, be sure to check the paper size setting.
Page 746: Problems Related To Peripheral Devices
TROUBLESHOOTING PROBLEMS RELATED TO PERIPHERAL DEVICES Problem Point to check Solution The connected USB Is the USB device compatible with the Ask your dealer if the device is compatible with the device cannot be machine? machine. used. Is the connected USB device Use "USB-Device Check"...
Page 747: Other Problems
Auto Clear or disable Auto Clear in "Auto Clear Setting". ➞ System Settings (Administrator) > "Operation Settings" > "Other Settings" > "Auto Clear Setting" You forgot the Was the administrator password Contact your dealer or nearest SHARP Service administrator changed from the factory default Department. password. setting? For the factory default administrator password, see "TO...
Page 748 Operation Guide MODEL: MX-C301 MX-C301W SHARP ELECTRONICS CORPORATION 1 Sharp Plaza, Mahwah, New Jersey 07495-1163. www.sharpusa.com SHARP ELECTRONICS OF CANADA LTD. 335 Britannia Road East, Mississauga, Ontario, L4Z 1W9 MXC301W-US-Z1...

Sharp MXC301W Operation Manual

Chapter 1 Before Using the Machine

Chapter 2 Copier

Chapter 3 Printer

Chapter 4 Facsimile

Quick Links

OPERATION GUIDE

Chapters

Troubleshooting

Related Manuals for Sharp MXC301W

Summary of Contents for Sharp MXC301W