Print Side Face Up Or Face Down - Sharp DX-C311 Operation Manual

Hide thumbs Also See for DX-C311:

Table of Contents

Types of paper that can be used in each tray

The following types of paper can be loaded in each tray.

" in the table indicates "cannot be used".

Recycle Paper

Heavy paper*

Glossy paper*

Transparency film

*1 "Heavy paper" is heavy paper up to 110 lbs. index (209 g/m

*2 Printer drivers that allow the use of glossy paper are PCL6, PCL5-c, and PS printer drivers in a Windows environment.

*3 Thin paper from 15 lbs. to 16 lbs. (55 g/m

Print side face up or face down

Paper is loaded with the print side face up or face down depending on the paper type and tray.

The loading orientation of punched paper, letterhead paper, and pre-printed paper differs from that of other paper.

For details, see

"Example: Placement orientations of punched paper, letter head paper, and pre-printed

Trays 1 to 4

Load the paper with the print side face up.

However, if the paper type is "Pre-Punched", "Letter Head" or "Pre-Printed", load the paper with the print side face

Load the paper with the print side face down.

However, if the paper type is "Pre-Punched", "Letter Head" or "Pre-Printed", load the paper with the print side face up*.

* If "Disabling of Duplex" is enabled in the system settings (administrator), load the paper in the normal way (face up in

trays 1 to 4; face down in the bypass tray).

Tray 1/Tray 2/Tray 3/Tray 4

) can be used.

BEFORE USING THE MACHINE

paper" (page

Table of Contents

Dx-c401 Dx-c311fx Dx-c401fx