Sharp DX-C311 Operation Manual page 159

Stamp
Move
Select the location to move the selected item.
3
2
1
4
If you wish to swap the position of the selected stamp item with the position of another stamp item, temporarily move
either one of the items to an unoccupied position and then switch the print positions.
Stamp
Move
Select the location to move the selected item.
3
2
5
1
Stamp
Layout
AAA AAA
6
OK
6
5
4
OK
6
5
4
OK
CONFIDENTIAL DO NOT COPY
1,2,3..
2-73
Touch the key of the desired destination
position.
The touched position key is highlighted and the print position
changes.
The keys that show the print positions will appear as follows
depending on the state of the settings.
Not selected, stamp setting has not
1
been selected.
Selected during selection of the stamp
1
setting.
Not available, stamp setting has already
1
been selected.
Touch the [OK] key.
If you attempt to move the stamp item to a position that is
already occupied by another stamp item, a message will
appear asking you if you wish to overwrite the other stamp
item. To overwrite the other stamp item, touch the [Yes] key. To
cancel the move, touch the [No] key.
An item has been already selected to
this location. Overwrite the item?
Touch the [OK] key.
COPIER
No Yes
Contents