Sending A Large Number Of Pages (Job Build) - Sharp DX-C311 Operation Manual

SENDING A LARGE NUMBER OF PAGES
(Job Build)
This function lets you separate an original consisting of numerous pages into sets, scan each set using the automatic
document feeder, and transmit the pages in a single transmission. Use this function when there are more original pages
than can be placed at once in the auto document feeder.
When scanning originals that are separated into sets, scan the set that has the first page first. The settings that you
select for the first set can be used for all remaining sets.
Originals
1
Up to 999 pages can be scanned. Note that when the memory is being used for other jobs, fewer pages can be scanned.
Indicator
line
1
Enter the destination fax number.
2
☞
ENTERING DESTINATIONS
Fax/Special Modes
Program
3
Card Shot
File
Transaction
Report
Originals are
scanned in
separate sets.
1
101
(page 4-16)
(2) (3)
OK
Erase Timer
1
Job Slow Scan
2
Build Mode
Business
Quick File
Card Scan
Own Name
Select
Insert the originals face up in the
document feeder tray.
Insert the originals all the way into the document feeder tray.
Multiple originals can be placed in the document feeder tray.
The stack of originals must not be higher than the indicator line
on the tray.
When the original is a different size than the size setting, set
the original size.
☞
SPECIFYING THE SCAN SIZE AND SEND SIZE
4-45)
Select job build mode.
(1) Touch the [Special Modes] key.
☞
SPECIAL MODES
(2) Touch the [Job Build] key so that it is
highlighted.
(3) Touch the [OK] key.
4-75
FACSIMILE
Transmission
1
(page 4-64)
Contents
(page