Specifying The Scan Size And Send Size - Sharp DX-C311 Operation Manual

SPECIFYING THE SCAN SIZE AND SEND SIZE

When the original is placed, the original size and the send size set in the system settings appear in the base screen as
the original size and send size.
In the above screen, the scan size (the original size) is 8-1/2" x 11" (A4) and the send size is auto. If, for example, the
scan size were 8-1/2" x 11" (A4) and the send size were 5-1/2" x 8-1/2" (B5), the image would be reduced before
transmission.
If the size of the placed original is different from the displayed original size, specify the original size.
☞
Specifying the original scan size (by paper size)
☞
Specifying the original scan size (by numerical values)
System Settings (Administrator): Default Original Size Settings
Set this if you frequently use a particular original size. The set size will appear in the [Original] key.
When this setting is configured, changing the original size can be omitted.
Scan Internet Fax
Address Book
Original
Direct TX Exposure
Sub Address
Resolution
Address Review Special Modes
File
Quick File
"Scan Size"
"Send Size" is set to
5-1/2" x 8-1/2" (B5)
8-1/2" x 11" (A4)
Fax USB Mem. Scan PC Scan
Scan: Send: Auto
8½x11
Auto
Standard
Auto Reception
Fax Memory:100%
Transmission
The image is reduced
to 5-1/2" x 8-1/2" (B5)
before transmission
(page 4-46)
(page 4-48)
4-45
FACSIMILE
Contents