Basic Procedure For Making Copies; Making Copies; Using The Automatic Document Feeder To Make Copies (1-Sided Copies Of 1-Sided Originals) - Sharp DX-C311 Operation Manual

BASIC PROCEDURE FOR MAKING
COPIES
This section explains the basic procedures for making copies, including selection of the copy ratio and other copy settings.

MAKING COPIES

USING THE AUTOMATIC DOCUMENT FEEDER TO
MAKE COPIES (1-sided copies of 1-sided originals)
This section explains how to make copies (1-sided copies of 1-sided originals) using the automatic document feeder.
Indicator
line
1
Color Mode
Full Color
Exposure
Auto
2
Copy Ratio Original
100%
Special Modes
2-Sided Copy
Plain
8½x11
Output
1. 8½x11
5½x8½
2.
File
8½x14
3.
8½x11
4.
Quick File
Paper Select
Auto
8½x11
Plain
Place the originals face up in the
document feeder tray with the edges
aligned evenly.
Insert the originals all the way into the document feeder tray.
Multiple originals can be placed in the document feeder tray.
Place portrait originals so that the top edge enters the feeder
first. Place landscape originals so that the left edge enters first.
The stack of originals must not be higher than the indicator line
on the tray.
Up to 50 sheets can be inserted.
The stack of originals must not exceed the indicator line. Do not
press down on the originals or otherwise load more originals than
can fit under the indicator line. This will cause original misfeeds.
Touch the [Original] key.
2-10
COPIER
Contents