Sharp DX-C311 Operation Manual page 116

Specifying a non-standard original size
Original
5½x8½ 8½x14
1
8½x11 8½x13
8½x13
Size Input
Original
Size Input
2
When a number from 11-3/4" to 14" (298 mm to 356 mm) to the X (horizontal) dimension and a number from 1" to
3-7/8" (25 mm to 99 mm) to the Y (vertical) dimension are entered at the same time, an original cannot be scanned.
OK
AB
2
5
Inch
Custom Size None
(1), (2) (3)
OK
Cancel OK
11
X
(1~14)
inch
½
Y 8
(1~8 1/2)
inch
Touch the [Size Input] key.
Enter the original size.
(1) Enter the X (horizontal) dimension of the
original.
With the [X] key highlighted, enter the X (horizontal)
dimension of the original with the
document glass is used, enter a number from 1" to
11-5/8" (25 mm to 297 mm).
When the automatic document feeder is used, enter a
number from 3-1/2" to 14" (89 mm to 356 mm).
When a number which is from 5-3/8" (139 mm) and less is
entered in 2-Sided copy mode, an original cannot be
scanned.
If the horizontal dimension of the original is less than
3-1/2" (89 mm), use the document glass.
(2) Enter the Y (vertical) dimension of the
original.
Touch the [Y] key and enter the Y (vertical) dimension of
the original with the
glass is used, enter a number from 1" to 8-1/2" (25 mm to
216 mm).
When the automatic document feeder is used, enter a
number from 4" to 8-1/2" (100 mm to 216 mm).
If the vertical dimension of the original is less than 4" (100
mm), use the document glass.
(3) Touch the [OK] key.
You will return to the base screen.
Make sure that the entered dimensions appear in the
[Original] key.
2-30
COPIER
keys. When the
keys. When the document
Contents