Sharp DX-C311 Operation Manual page 341

(1)
Fax/Special Modes
Card Shot
X
3
Y 2
4
X
• The send size is automatically selected based on the original size you entered.
• After selecting Card Shot, you can touch the [Original] key in the base screen to change the original scan size or the
send size. In this case, the screen of step 3 appears when you touch the scan size key. For the procedure for
setting the send size, see
Press the [BLACK & WHITE START] key to scan the front of the card.
5
To cancel scanning...
Press the [STOP] key (
Turn the card over so that the back is face down, and press the [BLACK &
WHITE START] key to scan the back of the card.
6
Before scanning the back of the card, you can touch the [Configure] key in the touch panel to change the exposure.
To cancel scanning...
Press the [STOP] key (
(A) (B) (2)
OK
Cancel OK
3
(1~8 1/2)
8
Fit to
inch
Send Size
1
(1~8 1/2)
8
inch
Size Reset
Y
"Specifying the send size of the
).
).
Specify the original size.
(1) Enter the original size.
• Touch the [X] key and enter the horizontal dimension
(X) of the original with the
• Touch the [Y] key and enter the vertical dimension (Y)
of the original with the
(A) To return the original size to the default size, touch
the [Size Reset] key.
(B) To automatically enlarge or reduce the image size to
the send size, touch the [Fit to Send Size] key. Do not
touch this key if you wish to scan the original at the
original size that you entered.
(2) Touch the [OK] key.
original" (page 4-50).
4-73
FACSIMILE
keys.
keys.
Contents