Update Of Firmware - Sharp DX-C311 Operation Manual

UPDATE OF FIRMWARE

The program (firmware) embedded in the machine can be updated from the Web page.
To update the firmware, follow the steps below.
• The customer is responsible for updating the firmware.
• Never turn off the power of the machine while the firmware is being updated.
• While the firmware is being updated, do not attempt to operate the machine from the operation panel, or from a computer
by remote operation using the Web page or other means.
• Once the firmware is updated, it will not be possible to restore the system to the state prior to the update.
Select [Update of Firmware] in the Web page menu.
1
A confirmation prompt will appear. Select [OK] to execute the update.
2
A form will appear to let you specify the file to be used for the firmware update.
Specify the file to be used and select [Execute].
3
The current version of the firmware and the version of the update file will appear.
Check the version of the firmware and click [OK].
4
The update will begin.
When the update is finished, you will be prompted to restart the machine. Select
5
[Reboot].
BEFORE USING THE MACHINE
1-27
Contents