Table of Contents
Advertisement
Settings
Item
Items common to all types
Box Type
Memory Box Name
Sub Address / Passcode
Items displayed when storing a confidential memory box
Print PIN
Items displayed when storing a relay broadcast memory box
Recipients
• When programming a new memory box, a sub-address that is already programmed for another box cannot be used.
However, the same passcode can be used for more than one memory box.
• A passcode can be omitted.
• [ ] and [#] cannot be used in a sub-address.
• Do not forget the Print PIN.
Select the type of box.
• Polling Memory: Store a memory box for F-code polling memory. The
sub-address and passcode that you program in the memory
box are necessary for the other machine to poll your machine
(request transmission) using F-code communication.
• Confidential:
Store a memory box for F-code confidential reception. In
addition, store a "Print PIN" in the memory box to print faxes
received by confidential reception. The sub-address and
passcode that you program in the memory box are necessary
for the other machine to send a fax to your machine by
F-code confidential transmission.
• Relay Broadcast: Store a memory box for F-code relay broadcast transmission.
Store the fax numbers of the end recipients (up to 30) in the
memory box. The sub-address and passcode that you
program in the memory box are necessary for the other
machine to perform a F-code relay request transmission (ask
your machine to relay a fax).
Enter a name (maximum of 18 characters) for the memory box.
Enter a sub-address and passcode. A maximum of 20 digits can be entered for
each.
Separate a sub-address and passcode by a slash ("/").
Set a "Print PIN" for confidential reception. Enter a 4-digit number.
Select the end recipients of the relay broadcast. Select the recipients from the
address book.
• Direct Entry:
An address that is not stored in the address book can be
directly entered. Enter the address in the same way as when
storing an address for a mode.
• Address Review: This displays a list of the selected recipients. Addresses can
be deleted from this list if needed.
7-98
SYSTEM SETTINGS
Description
Contents
Advertisement
Chapters
Table of Contents
Troubleshooting
