Sharp Osa; Application Communication Module (Mx-Amx2); Standard Application Setup; Selecting A Standard Application - Sharp DX-C311 Operation Manual

SHARP OSA

Sharp OSA (Open Systems Architecture) is an architecture that enables external applications to be directly connected to
a digital multifunction machine over a network.
When a digital multifunction machine that supports Sharp OSA is used, the keys that are displayed on the operation
panel and functions such as scan send can be linked to an external application.
There are two types of external applications: "standard application" and "external account application". An "external
account application" is used for centralized account management of a multifunction machine on a network. A "standard
application" refers to all other applications.

APPLICATION COMMUNICATION MODULE (MX-AMX2)

The application communication module is required to use a "standard application" on the machine.
When a previously registered standard application is selected in the Web pages of the machine, the machine retrieves
the operation screen from the registered URL. Control of the operation screen is performed by the standard application,
and Scan to FTP, Scan to Network Folder, and HTTPS transmission can be executed.

Standard application setup

To enable a general application in the Web pages of the machine, click [Application Settings] in the administrator menu
frame, and then [External Applications Settings] and [Standard Applications]. Configure settings for the standard
application in the screen that appears.

Selecting a standard application

The procedure for selecting a general application that has been enabled in the Web pages of the machine is explained
below.
COPY IMAGE SEND
Ready to scan for copy.
Color Mode
Full Color
1
Exposure
Auto
Copy Ratio Original
100%
DOCUMENT
FILING
0
Special Modes
2-Sided Copy
Plain
8 x11 1 / 2
Output
8 x11 1 / 2
1.
5 x8 1 / 2 1 / 2
2.
File
8 x14 1 / 2
3.
8 x11 1 / 2
4.
Quick File
Paper Select
Auto
8½x11
Plain
BEFORE USING THE MACHINE
Touch the [Sharp OSA] key in the mode
select keys.
If no standard applications have been stored in the Web pages,
the key cannot be touched.
1-43
Contents