Sharp DX-C311 Operation Manual page 143

Press the [COLOR START] key or the [BLACK & WHITE START] key to scan the
front side of the card.
5
To cancel scanning...
Press the [STOP] key (
Turn the card over and press the [COLOR START] key or the [BLACK & WHITE
START] key to scan the reverse side of the card.
Use the same [START] key that you used for the front side of the card.
6
To cancel scanning...
Press the [STOP] key (
Place next original. Press [Start].
When finished, press [Read-End].
7
To cancel copying...
Press the [STOP] key (
• The original must be placed on the document glass.
• Copying is only possible on standard size paper.
• XY Zoom cannot be used when using this function.
• The image cannot be rotated when using this function.
To cancel card shot...
Touch the [Cancel] key in the screen of step 4.
System Settings (Administrator): Card Shot Settings
This is used to set the values to which the size returns when the [Size Reset] key is pressed. 1" to 8-1/2" (25 mm to 210 mm)
can be entered for both the horizontal and vertical dimensions.
The factory default settings are 3-3/8" (86 mm) for X (the width) and 2-1/8" (54 mm) for Y (the height).
).
).
Touch the [Read-End] key.
Copying will begin.
Read-End
).
2-57
COPIER
Contents