Out-Profile Action Configuration Menu - Panasonic Switch-M12PWR Operation Manual

4.7.5.g. Out-Profile Action Configuration Menu
On the Access Control Configuration Menu, pressing "O" opens the
Out-Profile Action Configuration Menu, as shown in Fig. 4-7-33. On this
screen, you can set Out-Profile.
PN23129K/PN23129A Local Management System
Access Control Configuration -> Out-Profile Action Configuration Menu
Out-Profile Action:
Index Committed Rate
----- ----------------
Note: Committed Rate - 1Mbps/unit, Max available rate 10/100:100, Giga:1000
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
[C]reate Out-Profile Action
Command>
Enter the character in square brackets to select option
Screen Description
Total Entries Displays the number of created out-profiles.
Index Displays the out-profile Index number.
Committed Rate Displays the committed rate for out-profile.
(1Mbps/unit)
Burst Size(KB) Displays the traffic burst size that can be transmitted exceeding the
committed rate. For burst size, 4K, 8K, 16K, 32K, and 64K are used.
Deny/Permit Displays deny/permit of packet.
Policed-DSCP DSCP marking status.
Total Entries : 0
Burst Size(KB)
--------------
Fig. 4-7-33 Out-Profile Configuration
Displays the committed rate value.
141
Deny/Permit Policed-DSCP
----------- ------------
[D]elete Out-Profile Action
[M]odify Out-Profile Action
[Q]uit to previous menu