Panasonic Switch-M12PWR Operation Manual page 164

Transmit Period The number of seconds to wait before requesting the RADIUS server to
resend an authentication request The factory default setting is 30
seconds.
Max Request The maximum number of times of retransmitting an authentication
request. The factory default setting is 2 times.
Supplicant Displays the timeout for the client. The factory default setting is 30
Timeout seconds.
Quiet Period The number of seconds to wait before reattempting a failed
authentication The factory default setting is 60 seconds.
Serv Timeout Timeout for the authentication server The factory default setting is 30
seconds.
Re-auth Period Periodic re-authentication time interval The factory default setting is
3600 seconds.
Force Auth MAC Displays the time between a break of communications with a terminal
Timeout with a MAC address registered in Force Auth MAC Address and
deletion.
Per Port Re-auth Displays whether the periodic re-authentication is enabled or disabled.
Enabled
Disabled
Supplicant MAC Displays the MAC address of a successfully authenticated supplicant. If
Addr a supplicant registered in Force Authorized MAC Address is
communicating, this field displays its MAC address.
Type Displays the authentication type.
Dynamic
Static
MAC Control Set the operation mode for authentication requests.
Auto
Force
Unauthorized
Force
Authorized
Auth Status Displays the authentication status.
Unauthorized
Authorized
Re-auth Displays whether the periodic re-authentication is enabled or disabled.
Enabled
Disabled
The periodic re-authentication is performed.
The periodic re-authentication is not performed.
(Factory default setting)
A supplicant that succeeded in the MAC based
authentication.
A supplicant set by Force Authorized MAC Address
Configuration.
The access control function is enabled. The
authentication process relay is performed between
the client and authentication server.
The access control function is disabled. All
authentication requests from clients are ignored.
The access control function is disabled. The port is
made accessible without authentication. (Factory
default setting)
Indicates that the client is not authorized.
Indicates that the client is authorized.
The periodic re-authentication is performed.
The periodic re-authentication is not performed.
(Factory default setting)
164