Regional Topology Information - Panasonic Switch-M12PWR Operation Manual

4.7.4.i.

Regional Topology Information

On the Multiple Spanning Tree Configuration Menu, pressing "g" opens the
Regional Topology Information screen, as shown in Fig. 4-7-24. This screen
displays configuration information of the spanning tree for each port.
PN23129K/PN23129A Local Management System
Multiple Spanning Tree Configuration -> Regional Topology Information
Port Trunk Link Cist Port Regional Root
---- ----- ---- -----------------------
1 --- Down 8000 00C08Fxxxxxx
2 --- Down 8000 00C08Fxxxxxx
3 --- Down 8000 00C08Fxxxxxx
4 --- Down 8000 00C08Fxxxxxx
5 --- Down 8000 00C08Fxxxxxx
6 --- Down 8000 00C08Fxxxxxx
7 --- Down 8000 00C08Fxxxxxx
8 --- Down 8000 00C08Fxxxxxx
9 --- Down 8000 00C08Fxxxxxx
10 --- Down 8000 00C08Fxxxxxx
11 --- Down 8000 00C08Fxxxxxx
12 --- Down 8000 00C08Fxxxxxx
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
Command>
Enter the character in square brackets to select option
Fig. 4-7-24 Display of configuration information of
Screen Description
Port
Trunk
Link
Cist Port Regional
Root
Cist Port Regional
Path Cost
Available commands are listed below.
N Display the next page.
Press "N" to change the display to the next page.
P Display the previous page.
Press "P" to change the display to the previous page.
Q Return to the previous menu.
[P]revious Page
the spanning tree for each port
Displays the port number.
Displays the group number (key) of the trunk if trunking is set.
Displays the state of link.
UP Link is established normally.
DOWN Link is not established.
Displays root bridge ID.
Displays cost under transmission.
124
Cist Port Regional Path Cost
----------------------------
0
0
0
0
0
0
0
0
0
0
0
0
[Q]uit to previous menu