Panasonic PN28080K-TH Installation Manual
Hide thumbs
Also See for PN28080K-TH:
- Operation manual (94 pages) ,
- Operation manual (281 pages) ,
- Operation manual (438 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Operating Manual
Installation Guide
Thank you for purchasing our product.
This document provides important information about safe and proper
operations of this Switching Hub.
Please read the "Important Safety Instructions" on pages from 3 to 5.
Any problems or damage resulting from disassembly of this Switching Hub
by customers are not covered by the warranty.
2-12-7, Higashi-Shimbashi, Minato-ku, Tokyo Japan, 105-0021
©
Swtich-M8eG
Model No.
2019
PN28080K-TH
PN28080K-MY
PN28080K-ID
PN28080K-SG
I0716-10719
Printed in Japan
Advertisement
Table of Contents
Related Manuals for Panasonic PN28080K-TH
Summary of Contents for Panasonic PN28080K-TH
- Page 1 Swtich-M8eG Installation Guide PN28080K-TH Model No. PN28080K-MY PN28080K-ID PN28080K-SG Thank you for purchasing our product. This document provides important information about safe and proper operations of this Switching Hub. Please read the "Important Safety Instructions" on pages from 3 to 5.
-
Page 2: Table Of Contents
Contents Important Safety Instructions Basic Instructions for the Use of This Product 1 Product Outline 1.1 Features 1.2 Specifications 1.3 Accessories 1.4 Basic operation 2 Part Names and Functions 2.1 LED display change 3 Installation and Configuration 3.1 Mounting to rack 3.2 Configuration of IP address (BASIC) Troubleshooting... -
Page 3: Important Safety Instructions
Important Safety Instructions This chapter contains important safety instructions for preventing bodily injury and/or property damage. You are required to follow them. Severity of bodily injury and/or property damage, which could result from incorrect use of the Switching Hub, are explained below. WARNING This symbol indicates a potential hazard that could result in serious injury or death. - Page 4 WARNING Do not put the Switching Hub into fire. Deviation could lead to explosion and/or fire. Do not insert nor drop any foreign objects such as metal or readily combustible things into the inside through the openings, twisted pair ports, console ports, or SFP extension slots.
- Page 5 CAUTION This Switching Hub is to be periodically serviced in order to maintain its performance. Please choose a product administrator, and have them be sure to implement periodic maintenance. When doing maintenance, check the inspection chart that is posted on our website which has the requisite items listed on it. When using this Switching Hub to design systems, use it after applying ...
-
Page 6: Basic Instructions For The Use Of This Product
SFP extension slot, operation is not guaranteed. For the latest information about compatible SFP extension modules, check our website. 1. Please note that Panasonic shall not bear any liability whatsoever for any damages (this shall include lost earnings, lost opportunities, etc. but this is not restricted to these... -
Page 7: Product Outline
Product Outline Switch-M8eG is an all Giga bit Ethernet switching hub equipped with eight 10BASE-T/100BASE-TX/1000BASE-T ports and one SFP extension slot with a management function. 1.1 Features Fanless design solves noise problem or fan failure. Has a loop detection function, which notifies when a loop occurs with the corresponding port LED and automatically shuts down the looped port. -
Page 8: Specifications
Product Outline 1.2 Specifications Twisted pair port 1-8: RJ45 connector Interface Transmitting and receiving network system IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3ab 1000BASE-T Energy Efficient Ethernet IEEE802.3az (LPI only) SFP extension slot port 9 Transmitting and receiving network system IEEE802.3z Note: Can be used as an SFP exclusively Console port: RJ45 connector RS-232C (ITU-TS V.24) Store and Forward method: Forwarding rate... -
Page 9: Accessories
Screw (for fixing the main unit and the 19 inch rack mount bracket) Screw (for Connecting bracket) Power cord * Just the PN28080K-TH has 1 Installation Guide in Thai (a total of 2 guides). [Power Cord] The following power cords are supplied as per the intended nation of delivery. -
Page 10: Part Names And Functions
Part Names and Functions MAC Address label Power cord hook block Back panel Serial number label Ground terminal Power port 10/100/1000BASE-T port SFP extension slot Front panel Magnified view on the next page Console port Power port Connect the supplied power cord to this port and connect the other end into an electric outlet. - Page 11 Power LED Collision LED Status/ECO mode LED LED DISPLAY GIGA mode LED CHANGE BUTTON Speed modeLED DUPLEX mode LED Loop History mode LED PWR LED (Power) Green Light : Power is ON. : Power is OFF. ANY/COL. LED (Collision) Orange Light : During half-duplex operation, packet collision is occurring in either port.
- Page 12 Part Names and Functions Port LED of 1–9 indicates each mode in the following way: Port LED Display mode Behavior Description Green Light Link is established. STATUS/ECO Green Blink Transmitting and receiving data. No device connected. Green Light Link is established at 1000 Mbps. GIGA Link is established at 100 Mbps or 10 Mbps, or no device is connected.
-
Page 13: Led Display Change
2.1 LED display change How to switch the display using the LED DISPLAY CHANGE BUTTON LED DISPLAY CHANGE BUTTON Using "LED DISPLAY CHANGE BUTTON" on the front panel, you can switch the following operations: indication of a connection status with a connected terminal (Status mode), indication of communication speed at 1000 Mbps (GIGA mode), indication of communication speed at 100 Mbps or 10 Mbps (Speed mode), indication of transmission mode of full-duplex or half-duplex (DUPLEX mode), indication of a... - Page 14 Part Names and Functions Switch two types of Base modes and their LEDs in the following way: When Base mode is Status mode (factory default setting) Press "LED DISPLAY CHANGE BUTTON" manually. Automatic Boot Automatically returns to Base mode after 1 minute. Status mode DUPLEX Loop History...
-
Page 15: Installation And Configuration
Installation and Configuration 3.1 Mounting to rack Use the two 19-inch rack mount brackets and eight screws (for fixing the mount brackets to the Switching Hub) to fix the mount brackets to the four holes on each side of the Switching Hub. - Page 16 Installation and Configuration Front Back Connection screw hole Connection screw hole Installation on a rack (one unit) Front 19-inch rack mount brackets Installation on a rack (two units connected) 19-inch rack mount brackets Front Connection brackets Back...
-
Page 17: Configuration Of Ip Address (Basic)
3.2 Configuration of IP address (Basic) (1) Connect this Switching Hub and PC with a RJ45–DSub 9-pin console cable and start up the terminal emulator (ZEQUO assist Plus, etc.). (2) Pressing Enter key 3 times opens Login screen. Enter Login name and Password (the default is "manager"... - Page 18 Installation and Configuration Screen 1 Screen 2 Screen 3 Screen 4 Screen 5 * For the following, please see the PDF version Operating Instructions in CD-ROM. - Detailed configuration and management methods using the CLI. - Configuration and management method from ZEQUO assist Plus.
-
Page 19: Troubleshooting
Troubleshooting If you find any problem, please take the following steps to check. LED The POWER LED (Power) is not lit. Check if the power cord is disconnected. Please confirm that the power cord is securely connected to the power port. ...