Ieee802.1X Port-Based Authentication Configuration - Panasonic PN28080K Operation Manual

4.11. IEEE802.1X Port-Based Authentication
Configuration
Configure for the IEEE802.1X port-based authentication function in "Global
configuration mode" and "Interface configuration mode." Display the basic
information by entering "show dot1x port-based <port-list>" in "Privileged
mode."
IEEE802.1X port-based authentication status display command
M24eG#
NAS ID configuration command. Refer to [3.5.4. RADIUS Configuration] for
details.
M24eG(config)#
NAS ID delete command. Refer to [3.5.4. RADIUS Configuration] for details.
M24eG(config)#
IEEE802.1X port-based authentication mode configuration command
M24eG(config-if)#
Authentication status initialization command
M24eG(config-if)#
Maximum resend count configuration command
M24eG(config-if)#
Authentication operation configuration command
M24eG(config-if)#
Local re-authentication interval configuration and enable command
M24eG(config-if)#
Local re-authentication interval configuration and enable delete command
M24eG(config-if)#
Re-authentication status initialization command
M24eG(config-if)#
Re-authentication enable command
M24eG(config-if)#
Re-authentication disable command
M24eG(config-if)#
Waiting time configuration command after authentication fails
M24eG(config-if)#
Re-authentication interval configuration command
M24eG(config-if)#
Authentication server timeout configuration command
M24eG(config-if)#
Supplicant timeout configuration command
M24eG(config-if)#
Authentication request transmission interval configuration command
M24eG(config-if)#
show dot1x port-based <port-list>
dot1x nasid <NASID>
no dot1x nas-id
dot1x port-auth-mode port-based
dot1x init
dot1x max-req <value>
dot1x port-control {auto | force-authorized | force-unauthorized}
dot1x re-auth-timer local
no dot1x re-auth-timer local
dot1x re-authenticate
dot1x re-authentication
no dot1x re-authentication
dot1x timeout quiet-period <seconds>
dot1x timeout re-authperiod <seconds>
dot1x timeout server <seconds>
dot1x timeout supp-timeout <seconds>
dot1x timeout tx-period <seconds>
279