Table of Contents
Advertisement
4.7.9.d. Guest/Default VLAN Configuration Menu
On the 802.1x Access Control Configuration screen, pressing "G" opens the
Guest/Default VLAN Configuration Menu as shown in Fig. 4-7-47. On this
screen, you can configure Guest Access and the default VLAN. Guest Access
is a function to assign a terminal that failed authentication or a terminal
that caused supplicant timeout to a specific VLAN. The default VLAN is a
VLAN assigned when the Port Control setting is changed from Auto to
Force Authorized or Force Unauthorized.
PN23129K/PN23129A Local Management System
802.1x Access Control Configuration -> Guest/Default VLAN Configuration Menu
Port Current PVID
---- ------------
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
1
10
1
11
1
12
1
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Command>
Enter the character in square brackets to select option
Fig. 4-7-47 Guest/Default VLAN Configuration
Screen Description
Current PVID
Displays a PVID that is currently applied to the port.
Auth Status
Displays the authentication status.
Unauthorized
Authorized
Guest
Displays the VLAN ID applied to Guest Access. When Guest Access is
disabled, the field displays "----."
Default
Displays the VLAN ID applied when the Port Control setting is changed from
Auto to Force Authorized or Force Unauthorized. The default VLAN ID is
also applied when VLAN information cannot be obtained from the
authentication server although the dynamic VLAN is enabled and the
authentication succeeded.
Auth Status
Guest
Default
------------
------ -------
Authorized
----
----
Authorized
----
----
Authorized
----
----
Authorized
----
----
Authorized
----
----
Authorized
----
----
Authorized
----
----
Authorized
----
----
Authorized
----
----
Authorized
----
----
Authorized
----
----
Authorized
----
----
Set [G]uest VLAN
Set [D]efault VLAN
Indicates that the client is not authorized.
Indicates that the ID is authorized.
169
[Q]uit to previous menu
Advertisement
Table of Contents
