Panasonic Switch-M12PWR Operation Manual page 170

Available commands are listed below.
N Show the next page.
Press "N" to go to the next page.
V Show the previous page.
Press "V" to go to the previous page.
G Specify a VLAN to be assigned when a terminal that failed authentication or that does not
have a supplicant is connected.
Press "G." The command prompt changes to "Enter port number>." Enter the port you
wish to configure. Then, the command prompt changes to "Enter guest VLAN ID >."
Enter an integer between 1 and 4094. Enter 0 to disable the Guest Access function.
D Set Default VLAN ID.
Press "D." The command prompt changes to "Enter port number>." Enter the port you
wish to configure. Then, the command prompt changes to "Enter default VLAN ID >."
Enter an integer between 1 and 4094. Enter 0 to disable the Default VLAN function.
Q Return to the previous menu.
170