Table of Contents
Advertisement
Available commands are listed below.
N
Set a name of VLAN.
Press "N." The command prompt changes to "Set VLAN name->Enter VLAN name>."
Enter new VLAN name in 30 characters or less.
P
Set a member of VLAN.
Press "P." The command prompt changes to "Enter egress port number>." Enter a
port number you wish to set. When entering multiple port numbers, delimit with
comma with no space, or hyphenate the continuous numbers.
F
Set a Forbidden Port.
Press "F." The command prompt changes to "Enter forbidden port number>." Enter a
port number you wish to set. When entering multiple port numbers, delimit with
comma with no space, or hyphenate the continuous numbers.
A
Configure VLAN settings.
By pressing "A", created VLAN is reflected.
Q
Return to the previous menu.
87
Advertisement
Table of Contents
