Loading Paper In Other Trays; Bypass Tray - Sharp MX-B355W Quick Start Manual

BEFORE USING THE MACHINE

LOADING PAPER IN OTHER TRAYS

Bypass tray

1
2
3
4
Loading envelopes
Only the front side of envelopes can be printed or copied on. Place the front side facing down.
When loading envelopes in the bypass tray, set the paper type.
► CHANGE THE SETTING OF THE PAPER TRAY (page 21)
20
Open the bypass tray and the
extension tray.
Push the center of the pressure plate
down until it locks into place.
Load the paper with the print side
facing down.
Insert the paper along the bypass tray guides all the way into the
bypass tray until it stops slowly. Inserting the paper with excessive
force may cause the leading edge to fold back. Inserting the paper
too loosely may cause skewed feeding or misfeeds.
The paper must not exceed the maximum number of sheets
and must not be higher than the indicator line.
Set the bypass tray guides correctly to
the width of the paper.
Adjust the bypass tray guides so that they slightly contact
the loaded paper.