US Water Systems Fusion Oxi-Gen 089-FSF OG Series Installation, Operation And Maintenance Manual

Professional grade iron & sulfur removal system

Advertisement

Quick Links

Visit us online at
www.uswatersystems.com
US Water Fusion Oxi-Gen Professional
Grade Iron & Sulfur Removal System
Owners Manual
Models:
089-FSF-XXX-OG
REVISION #
1.7
REVISION DATE
March 22, 2017
US Water Systems, Inc.
1209 Country Club Road
Indianapolis, IN 46234
info@uswatersystems.com
www.uswatersystems.com
US Water Systems Corporate Office
REVISION 1.5, 10-31-14
1209 Country Club Road
Indianapolis, IN 46234
info@uswatersystems.com
www.uswatersystems.com
1-800-608-8792
1-800-608-8792

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Fusion Oxi-Gen 089-FSF OG Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for US Water Systems Fusion Oxi-Gen 089-FSF OG Series

  • Page 1 US Water Systems, Inc. 1209 Country Club Road Indianapolis, IN 46234 Models: 1-800-608-8792 info@uswatersystems.com 089-FSF-XXX-OG www.uswatersystems.com US Water Systems Corporate Office REVISION 1.5, 10-31-14 1209 Country Club Road REVISION # Indianapolis, IN 46234 REVISION DATE March 22, 2017 info@uswatersystems.com www.uswatersystems.com...
  • Page 2: Table Of Contents

    Be sure to check the entire system for any shipping damage or parts loss. Also note damage to the shipping cartons. Contact US Water Systems at 1-800-608-8792 to report any shipping damage within 24 hours of de- livery. Claims made after 24 hours may not be honored.
  • Page 3: Proper Installation

    Installation, Operation and Maintenance Manual FSF-200-OG, FSF-250-OG, FSF-300-OG, FSF-500-OG Proper Installation This water filtering system must be properly installed and located in accordance with the Installation Instructions before it is used or the warranty will be void. Do not install or store where it will be sweat-solder connections, as required by ...
  • Page 4: Component Checklists

    Installation, Operation and Maintenance Manual FSF-200-OG, FSF-250-OG, FSF-300-OG, FSF-500-OG Component Checklists Backwashing Catalytic Carbon Filter  Control Valve  Tank  Funnel  Manual  Carbon (may be multiple boxes)  Gravel (Separate Box)  Distributor Tube  Upper Basket ...
  • Page 5: System Overview And Specifications

    System is the answer to practically any iron, rust, sulfur or hydrogen sulfide problem, and is backed with our 90-Day 100% Satisfaction Guarantee. US Water Systems guarantees 100% iron and sulfur removal with its Fusion Oxi-Gen System which utilizes Hydrogen Peroxide or H2O2.
  • Page 6: How The Fusion Oxi-Gen Treatment System Works

    4-5 days. The typical frequency is 1-3 days. Contact US Water Systems and a Certified Water Specialist will be able to determine the frequency that can be used when considering the feed water contaminant levels. The factory...
  • Page 7: Fusion Installation Instructions And Specifications

    Installation, Operation and Maintenance Manual FSF-200-OG, FSF-250-OG, FSF-300-OG, FSF-500-OG Fusion Installation Instructions and Specifications WATER PRESSURE: A minimum of 20 pounds of water pressure is required for re- generation valve to operate effectively. ELECTRICAL FACILITIES: An uninterrupted alternating current (A/C) supply is required.
  • Page 8 Installation, Operation and Maintenance Manual FSF-200-OG, FSF-250-OG, FSF-300-OG, FSF-500-OG Tank and Control Valve Preparation 2) Lubricate the distributor O-ring and the tank O-ring. Then install the upper basket (the ac- tual upper basket may look different than the one pictured below) on the bottom of the valve by lining up the tabs then turning the basket clockwise to lock it in place.
  • Page 9: Injection Panel Installation Instructions

    Installation, Operation and Maintenance Manual FSF-200-OG, FSF-250-OG, FSF-300-OG, FSF-500-OG Injection Panel Installation Instructions 1. Layout the parts for the injection panel, then find the location where the panel will be in- stalled. Install the stainless steel mounting bar. A level can be used to make sure the bar is installed properly.
  • Page 10 Installation, Operation and Maintenance Manual FSF-200-OG, FSF-250-OG, FSF-300-OG, FSF-500-OG Injection Panel Installation Instructions 2. Hang the injection panel on the mounting bar. 3. Now install the inlet plumbing from the sediment filter to the left side of the injection panel. Use the 3/4”...
  • Page 11 Installation, Operation and Maintenance Manual FSF-200-OG, FSF-250-OG, FSF-300-OG, FSF-500-OG Injection Panel Installation Instructions 4. Now install the outlet plumbing using the Union Adaptor and tighten the union collars with channel locks. Do not over tighten these unions. 5. Now install the strainer filter and the strainer sump. If the feed water is high in turbidity, use the #100 mesh strainer filter.
  • Page 12 Installation, Operation and Maintenance Manual FSF-200-OG, FSF-250-OG, FSF-300-OG, FSF-500-OG Injection Panel Installation Instructions 1. There is a ball valve on the bottom of the strainer filter sump. This ball valve should be closed during operation. This ball valve and be used to flush the strainer filter sump period- ically.
  • Page 13: Carbon Tank Installation Instructions

    Installation, Operation and Maintenance Manual FSF-200-OG, FSF-250-OG, FSF-300-OG, FSF-500-OG Carbon Tank Installation Instructions Any solder joints being soldered near the valve must be done before connecting any piping to the valves. Always leave at least 6" (152 mm) between the control valve and joints being soldered when soldering pipes that are connected to the valves.
  • Page 14 Installation, Operation and Maintenance Manual FSF-200-OG, FSF-250-OG, FSF-300-OG, FSF-500-OG Carbon Tank Installation Instructions 5. Lubricate the O-rings on the connectors. Remove the red clips from the bypass on the valve and install both connectors. Be sure the Tee fitting in on the inlet port. 6.
  • Page 15: Injection Panel Chemical Solution Tank Installation Instructions

    Installation, Operation and Maintenance Manual FSF-200-OG, FSF-250-OG, FSF-300-OG, FSF-500-OG Injection Panel Chemical Solution Tank Installation Instructions 1. Place the chemical solution tank close to the injection panel. Drill a 1/4” hole in the top of the chemical tank. Push the 1/4” tubing in the hole in the tank. 2.
  • Page 16 Installation, Operation and Maintenance Manual FSF-200-OG, FSF-250-OG, FSF-300-OG, FSF-500-OG Injection Panel Chemical Solution Tank Installation Instructions 3. Be sure the weighted strainer on the 1/4” tubing until it can be seen in the slots in the weighted strainer. Then drop the strainer in the tank and push the 1/4” tubing through the hole in the tank until the weighted strainer is about 1”...
  • Page 17: Chemical Injection Panel Start-Up Instructions

    Installation, Operation and Maintenance Manual FSF-200-OG, FSF-250-OG, FSF-300-OG, FSF-500-OG Chemical Injection Panel Start-up Instructions 1. Plug the chemical injection panel in the wall. Pour the supplied Hydrogen Peroxide into the chemical solution tank. Unplug the pump power cord from the PCM on the injection panel and attach it to an extension cord that is energized.
  • Page 18: Control Valve Keypad Functions

    Installation, Operation and Maintenance Manual FSF-200-OG, FSF-250-OG, FSF-300-OG, FSF-500-OG Key Pad Configuration SETTINGS This function is to enter the basic set up infor- mation required at the time of installation. MANUAL This function is to initiate an immediate or REGEN delayed manual regeneration.
  • Page 19: Control Valve Programming

    3) Set the “Time of Day” and the “Date”. 4) Set the “Regen Days” to the desired value (contact US Water Systems for help with the proper frequency. Typically 3 days will work for most applications). 5) The “Gallons” parameter should be set to “Off”.
  • Page 20: System Start-Up Instructions

    Installation, Operation and Maintenance Manual FSF-200-OG, FSF-250-OG, FSF-300-OG, FSF-500-OG System Start-up Instructions 1. Once all the plumbing has been connected, open the main water shutoff valve. If the in- jection panel is used, open both ball valves on the panel. 2.
  • Page 21: H2O2 Injection Rate Adjustment Instructions (Bubble Method)

    FSF-500-OG Hydrogen Peroxide Injection Rate Adjustment Instructions US Water Systems uses the “bubble method”. This is a visual method that works best for quick and reliable H2O2 injection rates. 1. Set the proportional control on the Stenner injection panel to 50% using the knob on the PCM.
  • Page 22: What To Expect And Routine Maintenance

    “grow” backwards toward the treatment system and the sulfur smell will not go away. If this does occur, it is easily eradicated with a chlorination well “shock” procedure. Ask a US Water Systems representative about our well sanitizing kits.
  • Page 23: Maintenance Schedule

    Installation, Operation and Maintenance Manual FSF-200-OG, FSF-250-OG, FSF-300-OG, FSF-500-OG Maintenance Schedule Component Action Frequency Existing Well Pressure Tank Drain tank until the water runs clear. 1-6 Months Panel Sediment Filter Drain the filter at the dump valve period- Monthly ically to flush any solids that may accu- mulate.
  • Page 24: Limited Lifetime Warranty

    GENERAL PROVISIONS residential place of installation of this Fusion Oxi-Gen This warranty does not apply to any commercial or Water Conditioning System, US WATER SYSTEMS, INC. industrial installations or to any part of the water warrants the following: conditioner which has been subjected to misuse, neglect, alteration or accident;...

This manual is also suitable for:

Fsf-250-ogFsf-200-ogFsf-500-ogFsf-300-og

Table of Contents