Table of Contents
Advertisement
■ Matn unta
FERRITE EMI FILTER
q
w
e
q GROUND TERMINAL [GND]
Connect to the ship's ground. (p. 81)
w DSC ANTENNA CONNECTER
Connect to a 50 Ω HF marine band antenna
through a 50 Ω coaxial cable with a PL-259 plug.
This antenna is used for receiving Distress calls.
NOTE: To receive a Distress call, BE SURE
to connect an HF marine band antenna to this
antenna connector. Otherwise, you cannot
receive any Distress calls.
e SPEAKER JACK [SP]
Connect to the SP-24 (p. 80) or an external
speaker.
NOTE: When using an external speaker, BE
SURE to turn OFF the internal speaker. (p. 5)
Audio is output from the external speaker only
when the internal speaker is OFF.
r GPS JACK [GPS]
Connect to a GPS receiver to input position and
UTC data for DSC operations. (IEC 61162-1
Edition 4.0 (2010-11))
• An IEC 61162-1 Edition 4.0 (2010-11) (sentence
formatters: GGA) compatible GPS receiver is
required. Ask your dealer about suitable GPS
receivers.
RCA
GPS IN (+)
t CONTROLLER CONNECTOR [CONTROLLER]
Connect to the supplied controller.
r
t
y
u
GPS IN (–)
PANEL DESCRIPTION
!2
!1
i
y MODEM SOCKET [AF/MOD] (p. 87)
Connect to an external terminal unit for SSB
mode operation through an RS-232C cable
(D-sub 15-pin).
u REMOTE SOCKET [REMOTE] (p. 88)
Connect to a PC through an RS-232C cable
(D-sub 9-pin) for remote control.
i PRINTER CONNECTOR
Connect to an IBM
printer to automatically or manually print out
received DSC information.
o ANTENNA CONNECTOR
Connect to a wire or whip antenna through the
AT-141
hf automatic antenna tuner
antenna is used for transmitting any calls and
receiving any calls other than Distress calls.
WARNING! NEVER directly connect the
R
antenna to this connector.
!0 TUNER CONTROL SOCKET [TUNE]
Connect to the control cable of the supplied
AT-141
hf automatic antenna tuner
connector kit is supplied to connect the AT-141.
!1 POWER SWITCH [DC ISOLATE]
Turns the transceiver's main power ON or OFF.
When the main power is ON, the power key's
backlight is dimly lit.
!2 DC POWER TERMINALS
Connect to a 24 V DC power source through the
supplied DC power cables. The red terminal is
positive (+) and the black terminal is negative (
2
FERRITE EMI FILTER
o
!0
®
centronics or compatible
. The
. A female
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
).
–
2
Advertisement
Table of Contents
