D Position Date And Time Area - Icom IC-GM800 Instruction Manual

2
PANEL DESCRIPTION
■ Function display (Main screen)

D Position Date and Time area

POSITION AREA
The current position is displayed when valid GPS
data is received, or when you manually enter your
position.
Indtcaaton
NO Displayed when a GPS receiver is
POSITION not connected and the position has
not been manually entered.
?? Blinks every 2 seconds instead of the
position when the GPS position data
is invalid.
• The last position is held for only 23.5
hours. After that, "NO POSITION" will be
displayed.
Blinks every 2 seconds instead of the
position after 4 hours have passed
since you manually entered the
position.
• The manually entered position is held
for only 23.5 hours. After that, "NO
POSITION" will be displayed.
7
Description
DATE AND TIME AREA
• The current time is displayed when valid GPS data
is received, or manually enter the time.
• The date information is displayed when the RMC
GPS sentence formats are included in the GPS
signal.
Indtcaaton
NO TIME Displayed when a GPS receiver is not
connected and the time has not been
manually entered.
Local Displayed when the offset time is set.
Manual
Displayed when the time is manually
entered.
UTC Displayed when the GGA, GLL or GNS
GPS sentence formats are included in
the GPS signal.
??
Blinks every 2 seconds instead of the
time when the GPS current time is
invalid.
• After 23.5 hours has passed, "NO TIME"
will be displayed.
Blinks every 2 seconds instead of the
time after 4 hours have passed since
you manually entered the time.
• The manually entered time is held for only
23.5 hours. After that, "NO TIME" will be
displayed.
Description