D Receiving A Distress Relay; Acknowledgement - Icom IC-GM800 Instruction Manual

Inffrratifn
L
• The communication frequency is automatically
selected. Monitor it, because a coast station may
require assistance.
• Rotate [CH/GRP] to confirm the call contents.
• See page 29 for details of the Software key functions
in the DSC Task mode.
3. Push [Standby Mode]
Standby mode.
TIP: See page 42 for details of sending

acknowledgement.

TIP: When you push [Pause]
countdown will be paused. Push [Resume]
restart the countdown.
to return to the
in step 2, the
to

D Receiving a Distress Relay

acknfwledgerent
1. When a Distress Relay Acknowledgement is
received:
• Alarm sounds.
• " " is displayed.
• The following screen is displayed and the backlight
blinks.
Push [Alarm Off] .
2. Push [Close Call RCVD Window]
Inffrratifn
L
• The communication frequency is automatically
selected. Monitor it, because a coast station may
require assistance.
• Rotate [CH/GRP] to confirm the call contents.
• See page 29 for details of the Software key functions
in the DSC Task mode.
3. Hold down [PTT] to announce your
4. Push [Standby Mode]
Standby mode.
7
DSC OPERATION
Push
any
.
Push
any
situation.
to return to the
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
60