D Auto Print; D Dsc Loop Test - Icom IC-GM800 Instruction Manual

Self-Terminate
Select whether or not to sound an alarm when
receiving the same Distress call.
1. Push [MENU].
2. Select "Self-Terminate," then push [ENT].
(DSC Settings > Alarm Status > Self-Terminate)
3. Select an option, then push [ENT].
• On: Alarm sounds. (Default)
• Off: Alarm does not sound.
4. Push [MENU] to return to the Main screen.
Discrete
Select whether or not to sound an alarm when
receiving a lower priority DSC call while receiving a
higher priority call.
1. Push [MENU].
2. Select "Discrete," then push [ENT].
(DSC Settings > Alarm Status > Discrete)
3. Select an option, then push [ENT].
• On: Alarm sounds. (Default)
• Off: Alarm does not sound.
4. Push [MENU] to return to the Main screen.

D Auto Print

Select whether or not to enable the Automatic Print
Out function when a DSC call is received.
The received DSC call content is printed out if a
printer is connected to the transceiver.
1. Push [MENU].
2. Select "Auto Print," then push [ENT].
(DSC Settings > Auto Print)
3. Select an option, then push [ENT].
• On: The received DSC call contents is printed out.
• Off: The received DSC call contents is not printed out.
(Default)
4. Push [MENU] to return to the Main screen.

D DSC Loop Test

The DSC loop test function sends transmit DSC
signals to the receive AF circuit to compare and
check the TX and RX signals at the AF level.
1. Push [MENU].
2. Select "DSC Loop Test," then push [ENT].
(DSC Settings > DSC Loop Test)
3. Push [ENT] to start the DSC loop test.
• When the transmit DSC and receive DSC signals
match, "OK" is displayed.
4. Push [MENU] to return to the Main screen.
NOTE: If "Failed" is displayed in step 3, contact
your dealer.
7
DSC OPERATION
7
74