D Sending A Distress Relay Acknowledgement - Icom IC-GM800 Instruction Manual

D Sending a Distress Relay
acknowledgement
Only when the Distress Relay call is received, you
can send the Distress Relay acknowledgement.
Quick ACK:
1. When a Distress Relay call is received:
• Alarm sounds.
• The following screen is displayed.
Push any [Alarm Off]
2. Push [Accept] .
• Enters the DSC Task mode.
• "✔" is displayed on the Task tab.
3. Push [≈] to scroll the software key function.
4. Push [ACK (Relay)]
• The call contents screen is displayed.
Push
• The call contents screen is displayed.
 Rotate [CH/ENT] to view the call contents.
.
Push
any
Push
.
5. Push [Call] to send the Distress Relay
acknowledgement.
6. After sending, the following screen is displayed.
7. Hold down [PTT] to communicate with the ship in
distress.
8. Push [Standby Mode]
Standby mode.
TIP: When you push [Pause]
countdown will be paused. Push [Resume]
restart the countdown.
7
DSC OPERATION
Push
to return to the
in step 2, the
to
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
42