Icom IC-GM800 Instruction Manual page 67

When receiving "ACK (able)":
You can make the voice communication on the
frequency that you specified when you sent the call.
1. When an Individual acknowledgement "ACK
(able)" is received:
• Alarm sounds.
• The following screen is displayed and the backlight blinks.
• " " is displayed.
Push [Alarm Off] .
2. Push [Close Call RCVD Window]
• Automatically selects the communication frequency
that you specified when sending the call.
• Rotate [CH/GRP] to confirm the call contents.
• See page 29 for details of the software key functions
in the DSC Task mode.
3. Hold down [PTT] to communicate
4. Push [Standby Mode]
Standby mode.
Push
any
.
Push
any
.
to return to the
When receiving "ACK (unable)":
You cannot make the voice communication.
1. When an Individual acknowledgement "ACK
(unable)" is received:
• Alarm sounds.
• The following screen is displayed and the backlight
blinks.
• " " is displayed.
Push [Alarm Off] .
2. Push [Close Call RCVD Window]
• Rotate [CH/GRP] to confirm the call contents.
• See page 29 for details of the Software key functions
in the DSC Task mode.
3. Push [Standby Mode]
Standby mode.
► Continued on the next page.
7
DSC OPERATION
Push
any
.
Push
any
to return to the
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
62