Sending A Non-Distress Calls; D Sending An Individual Call - Icom IC-GM800 Instruction Manual

7
DSC OPERATION

■ Sending a Non-Distress calls

D Sending an Individual call

The Individual call function enables you to transmit
a DSC signal to only a specifi c coast station or ship.
After transmission, wait for an acknowledgement from
the receiving station.
You can communicate by voice after receiving the
acknowledgement 'ACK (able).'
1. Push [Compose Non-Distress]
 To display the screen from the Menu screen:
Compose Non-Distress
([MENU] >
2. Select "Address."
3. Select an Individual address, or "Manual Input."
(Example: STATION A)
NOTE:
When you select "Manual Input" in
this step, push the keypad to manually enter an
Individual ID.
43
.
Push
)
Rotate
CH/GRP
+
Push
Rotate
CH/GRP
+
Push
4. Select "Category."
5. Select an option.
(Example: Routine)
Information

When you have manually entered an Individual ID,
push the keypad to select the DSC call frequency.
1. Select "Call Frequency."
2. Select a DSC call frequency, or "Manual Input."
(Example: INTER2-1)
NOTE: When you select "Manual Input" in this
step, push the keypad to manually enter the DSC
call frequency.
Rotate
CH/GRP
+
Push
Rotate
CH/GRP
+
Push
Rotate
CH/GRP
+
Push
Rotate
CH/GRP
+
Push