D Receiving A Distress Acknowledgement - Icom IC-GM800 Instruction Manual

8. Select your desired Individual ID, or "Manual
Input." (Example: STATION A)
NOTE:
When you select "Manual Input" in
this step, push the keypad to manually enter your
desired Individual ID.
9. Push [Call] to send the Relay call.
10. Push [Standby Mode]
Standby mode.
TIP: See page 36 for details of sending an
acknowledgement.
TIP: When you push [Pause]
countdown will be paused. Push [Resume]
restart the countdown.
Rotate
CH/GRP
+
Push
to return to the
in step 2, the
to
D Receiving a Distress acknfwledgerent
1. When a Distress Acknowledgement is received:
• Alarm sounds.
• The following screen is displayed and the backlight
blinks.
• " " is displayed.
Push [Alarm Off] .
2. Push [Close Call RCVD Window]
Inffrratifn
L
• The communication frequency is automatically
selected. Monitor it, because a coast station may
require assistance.
• Rotate [CH/GRP] to confi rm the call contents.
• See page 29 for details of the software key functions
in the DSC Task mode.
3. Push [Standby Mode]
Standby mode.
7
DSC OPERATION
Push
any
.
Push
any
to return to the
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
58