Loading And Unloading By Fork Lift Truck; Fork Lift Truck Requirements; Figure 4-5 Typical Lifting With Fork Lift Truck (Top: In-Line Layout / Bottom: Back-To-Back Layout) - ABB PCS6000 User Manual

4.2.6. Loading and unloading by fork lift truck

The following instructions are to be observed for lifting the PCS6000 cabinets by fork lift
truck.
CAUTION
▶ Forks may only be applied at the longitudinal side (Fig. 4–5). The distance a
between the forks must be more than 1500 mm.
▶ Fork lift truck may only be driven at walking speed
▶ Length and entry width must have dimensions ensuring a safe transport (see
center of gravity marking on the packing)

4.2.6.1. Fork lift truck requirements

For loading and transporting the PCS6000 cabinets a fork lift truck is to be used that fulfills
the following criteria:
– Load capacity
– Fork length
– Entry width
1
2
a > 1500
1
2
a > 1500
Figure 4–5 Typical lifting with fork lift truck (top: In-line layout / bottom: back-to-back
layout)
1) Cabinet
2) Eyebolt
3) Base frame
PRODUCT
PCS6000
Risk of tipping!
2
4
2
4
DOCUMENT KIND
User manual
TRANSPORTATION, STORAGE AND DISPOSAL
3
1
5
4) Wood pallet
5) Center of gravity
DOCUMENT ID.
3BHS600000 E40
1
5
REV. LANG. PAGE
G en 56/114