Moving By Crane; Figure 4-7 Moving Pcs6000 With Suspension Beam - ABB PCS6000 User Manual

4.2.8.1. Moving by crane

CAUTION
▶ Remove the protruding eyebolts after moving equipment to final location.
If moving the equipment by crane using the eyebolts or the lifting plates, the following must
be assured:
– When lifting the equipment with the base frame, always use the eyebolts attached to the
base frame!
– The equipment must be transported in such a way that it does not suffer any shocks.
– Always use a suspension beam for lifting as shown in Fig. 4–7.
Ropes of insufficient strength and length are not allowed when lifting the equipment by
crane.
5
Figure 4–7 Moving PCS6000 with suspension beam
1) Hook
2) Lifting cables
3) Suspension beam
4) Cabinet
PRODUCT
PCS6000
Risk of stumbling!
1
2
3
6
DOCUMENT KIND
User manual
TRANSPORTATION, STORAGE AND DISPOSAL
4
7
5) Eyebolt
6) Base frame
7) Wood pallet
DOCUMENT ID.
3BHS600000 E40
REV. LANG. PAGE
G en 60/114